• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM C 1116/C1116M : 2010 : REV A : R2015

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Fiber-Reinforced Concrete
Available format(s)

Hardcopy , PDF

Superseded date

29-09-2023

Language(s)

English

Published date

12-05-2015

CONTAINED IN VOL. 04.02, 2015 Describes all forms of fiber-reinforced concrete that are delivered to a purchaser with the ingredients uniformly mixed, and that can be sampled and tested at the point of delivery.

1.1This specification covers all forms of fiber-reinforced concrete that are delivered to a purchaser with the ingredients uniformly mixed, and that can be sampled and tested at the point of delivery. It does not cover the placement, consolidation, curing, or protection of the fiber-reinforced concrete after delivery to the purchaser.

1.2Certain sections of this specification are also applicable to fiber-reinforced concrete intended for shotcreting by the dry-mix process when sampling and testing of concrete is possible only at the point of placement. In this case, the sections dealing with batching plant, mixing equipment, mixing and delivery, and measurement of workability and air content, are not applicable.

1.3This specification does not cover thin-section glass fiber-reinforced concrete manufactured by the spray-up process that is under the jurisdiction of ASTM Subcommittee C27.40.

1.4The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.5The following precautionary statement pertains only to the test method portion, Sections 15 and 18, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
C 09
DevelopmentNote
Supersedes ASTM C 1116 (01/2007)
DocumentType
Standard
Pages
7
ProductNote
Reconfirmed 2015
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM C 118M : 2019 Standard Specification for Concrete Pipe for Irrigation or Drainage (Metric) (Withdrawn 2024)
ASTM C 412 : 2019 Standard Specification for Concrete Drain Tile
ASTM C 507M : 2022 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM C 1786 : 2019 Standard Specification for Segmental Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
ASTM C 926 : 2023 Standard Specification for Application of Portland Cement-Based Plaster
ASTM C 1433 : 2020 : EDT 1 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
ASTM C 1846/C1846M : 2019 Standard Specification for Performance Based Manufacture of Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
ASTM C 118 : 2019 Standard Specification for Concrete Pipe for Irrigation or Drainage
ASTM C 506M : 2022 : REV A Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM C 412M : 2019 Standard Specification for Concrete Drain Tile (Metric)
ASTM C 1818 : 2022 Standard Specification for Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
ASTM D 7508/D7508M : 2020 Standard Specification for Polyolefin Chopped Strands for Use in Concrete
ASTM C 1731 : 2021 Standard Specification for Concrete Floor Tile
ASTM C 478/C478M : 2022 Standard Specification for Circular Precast Reinforced Concrete Manhole Sections
ASTM C 655M : 2019 : REV A Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM C 505M : 2019 Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
ASTM C 985 : 2022 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
ASTM C 76M : 2022 : REV A Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM C 654M : 2019 Standard Specification for Porous Concrete Pipe (Metric)
ASTM C 507 : 2022 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
ASTM C 506 : 2022 : REV A Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
ASTM C 1504M : 2020 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
ASTM C 1417 : 2019 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
ASTM C 1227 : 2023 Standard Specification for Precast Concrete Septic Tanks
ASTM C 655 : 2019 : REV A Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
ASTM C 1670/C1670M : 2023 Standard Specification for Adhered Manufactured Stone Masonry Veneer Units
ASTM C 1433M : 2022 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
ASTM C 76 : 2022 : REV A Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
ASTM C 1613 : 2022 Standard Specification for Precast Concrete Gravity Grease Interceptor Tanks
ASTM C 94/C94M : 2023 Standard Specification for Ready-Mixed Concrete
ASTM C 387/C387M : 2023 Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
ASTM C 654 : 2019 Standard Specification for Porous Concrete Pipe
ASTM C 1417M : 2019 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
ASTM C 1577 : 2020 : EDT 1 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
ASTM C 505 : 2019 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
ASTM C 1504 : 2020 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
ASTM C 14 : 2020 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
ASTM C 985M : 2022 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM C 1903 : 2021 Standard Specification for Precast Concrete Duct Bank
ASTM C 14M : 2020 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
ACI PRC 506.5:2022 Specifying Underground Shotcrete - Guide

ASTM C 1077 : 2007 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 1077 : 2002 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 1550 : 2005 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C 125 : 2021 Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 1077 : 2006 : REV A Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 138/C138M : 2014 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C 31/C31M : 2019 : REV A Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 1077 : 2007 : REV A Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 173/C173M : 2014 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C 173/C173M : 2009 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C 1077 : 2010 : REV C Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 94/C94M : 2021 : REV B Standard Specification for Ready-Mixed Concrete
ASTM D 7357 : 2007 : R2012 Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete
ASTM C 31/C31M : 2022 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 138/C138M : 2023 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C 1077 : 2003 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 31/C31M : 2021 : REV A Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 1399 : 2001 Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
ASTM D 6942 : 2003 : R2012 Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments
ASTM C 39/C39M : 2021 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 1077 : 2011 : REV A Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C 1077 : 2009 : REV A Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 192/C192M : 2000 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM A 820/A820M : 2022 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
ASTM C 1550 : 2004 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C 1550 : 2003 : REV A Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C 1077 : 2016 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C 1436 : 2008 Standard Specification for Materials for Shotcrete
ASTM C 1077 : 2011 : REV B Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ACI 211.1 : 1991 SELECTING PROPORTIONS FOR NORMAL, HEAVYWEIGHT AND MASS CONCRETE
ASTM C 31/C31M : 2023 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 1077 : 2005 : REV B Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 125 : 2000 Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 1077 : 2016 : REV A Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C 1077 : 2008 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 1077 : 2017 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C 94/C94M : 2021 : REV A Standard Specification for Ready-Mixed Concrete
ASTM C 1077 : 2005 : REV B : EDT 1 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 1436 : 2013 : REDLINE Standard Specification for Materials for Shotcrete
ASTM D 6942 : 2003 : R2008 Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments
ASTM C 42/C 42M : 2016-10 TEST METHOD FOR OBTAINING AND TESTING DRILLED CORES AND SAWED BEAMS OF CONCRETE
ASTM C 39/C39M : 2015 : REV A Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 1550 : 2019 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C 1550 : 2003 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C 1550 : 2010 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C 1077 : 2017 : REDLINE Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C 1077 : 2006 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 1077 : 2015 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C 1077 : 2014 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C 1077 : 2010 : REV B Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 1666/C1666M : 2008 : R2015 Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
ASTM C 1077 : 2013 : REV A Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C 1140 : 2003 : REV A Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
ASTM C 1077 : 2005 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 192/C192M : 2016-04 PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE LABORATORY
ASTM C 39/C39M : 2020 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 666/C666M : 2015 : REDLINE Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing
ASTM C 1077 : 2010 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 1399 : 2002 Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
ASTM C 1666/C1666M : 2008 : R2023 Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
ASTM C 173/C173M : 2016 : REDLINE Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C 94/C94M : 2022 : REV A Standard Specification for Ready-Mixed Concrete
ASTM C 1077 : 2010 : REV A Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 1399 : 2004 Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
ASTM C 1602/C1602M : 2018 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
ASTM C 1436 : 2013 Standard Specification for Materials for Shotcrete (Withdrawn 2022)
ASTM C 1077 : 2015 : REV A Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C 31/C31M : 2021 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 1140 : 2003 Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
ASTM C 143/C143M : 2015 : REV A Standard Test Method for Slump of Hydraulic-Cement Concrete
ASTM C 1550 : 2012 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C 94/C94M : 2021 Standard Specification for Ready-Mixed Concrete
ACI 211.2 : 1998 SELECTING PROPORTIONS FOR STRUCTURAL LIGHTWEIGHT CONCRETE
ASTM C 1550 : 2008 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C 1550 : 2002 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C 1602/C1602M : 2022 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
ASTM C 1077 : 2009 : REV B Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 1077 : 2000 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 125 : 2021 : REV A Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 31/C31M : 2017 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM A 820/A820M : 2016 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
ASTM C 31/C31M : 2015 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 39/C39M : 2018 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 31/C31M : 2019 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM D 6942 : 2003 Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments
ASTM C 1399 : 2007 : REV A Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
ASTM C 1077 : 2013 : REV B Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C 666/C666M : 2015 Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing (Withdrawn 2024)
ASTM C 94/C94M : 2022 Standard Specification for Ready-Mixed Concrete
ASTM C 1480 : 2000 Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
ASTM C 1077 : 2010 : REV D Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 1140 : 1998 Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
ASTM C 1550 : 2010 : REV A Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C 1077 : 2009 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 1077 : 2013 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C 138/C138M : 2017 : REV A Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C 125 : 2020 Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 1550 : 2012 : REV A Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C 1077 : 2011 : REV C Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C 1077 : 2011 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C 1077 : 2008 : REV A Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 1480 : 2000 : R2005 Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
ASTM C 150 : 2002 : REV A : EDT 1 Standard Specification for Portland Cement
ASTM C 1077 : 2003 : REV A Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 1399 : 2007 Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
ASTM C 1399 : 2000 Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
ASTM C 1077 : 2005 : REV A Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C 1436 : 1999 Standard Specification for Materials for Shotcrete
ACI 506.2 : 2013 SPECIFICATION FOR SHOTCRETE
ASTM C 1077 : 2012 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C 94/C94M : 2023 Standard Specification for Ready-Mixed Concrete
ASTM C 125 : 2009 Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM D 7357 : 2007 Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete

View more information
£62.61
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.