• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM C 1423 : 2021

Current
Current

The latest, up-to-date edition.

Standard Guide for Selecting Jacketing Materials for Thermal Insulation
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

21-05-2021

1.1This guide covers criteria for selecting thermal insulation jacketing materials and is not intended for use as a performance or product specification.

1.2This guide applies to jacketing materials applied over thermal insulation for piping, ducts, and equipment.

1.3This guide includes jacketing materials used over thermal insulation whether the insulation is in the form of pipe, board, or blanket, or field applied materials that are self-supporting, including insulating cements.

1.4This guide does not include covers or other retaining walls that contain loose fill, other nonsupporting insulation materials, or conduits or containers for buried insulation systems.

1.5This guide does not include mastics and coatings and their reinforcements.

1.6The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
C 16
DocumentType
Guide
Pages
6
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM C 1729M : 2021 Standard Specification for Aluminum Jacketing for Insulation
ASTM C 921 : 2010 : R2015 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation (Withdrawn 2021)
ASTM C 1767M : 2021 Standard Specification for Stainless Steel Jacketing for Insulation
ASTM C 1767 : 2021 Standard Specification for Stainless Steel Jacketing for Insulation
ASTM C 1729 : 2021 Standard Specification for Aluminum Jacketing for Insulation
ASTM C 1879 : 2021 Standard Practice for Installation of Aluminum and Stainless Steel Jacketing over Thermal Insulation on Pipe and Rigid Tubing

ASTM C 165 : 2023 Standard Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM C 488 : 2016 Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
ASTM C 1775 : 2014 Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications
ASTM D 3363 : 2022 Standard Test Method for Film Hardness by Pencil Test
ASTM A 1008/A1008M : 2020 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable
ASTM E 84 : 2023 : REV D Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 168 : 2019 Standard Terminology Relating to Thermal Insulation
ASTM C 921 : 2010 : R2015 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation (Withdrawn 2021)
ASTM E 96/E96M : 2022 : REV A : EDT 1 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM E 96/E96M : 2022 : REV A Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM E 84 : 2023 : REV C Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM A 1008/A1008M : 2021 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable
ASTM E 96/E96M : 2021 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM G 154 : 2016 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
ASTM B 209 : 2014 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
ASTM C 1057 : 2022 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer
ASTM E 96/E96M : 2022 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM E 84 : 2023 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E 596 : 2022 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM D 3363 : 2020 Standard Test Method for Film Hardness by Pencil Test
ASTM E 96/E96M : 2023 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM G 154 : 2023 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Materials
ASTM E 84 : 2021 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 1775 : 2022 Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications
ASTM C 488 : 2016 : R2023 Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
ASTM E 84 : 2022 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 1258 : 2021 : REV A Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
ASTM E 119 : 2022 Standard Test Methods for Fire Tests of Building Construction and Materials
ASTM A 1008/A1008M : 2021 : REV A Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable
ASTM C 1338 : 2019 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM A 240/A240M : 2022 : REV B Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM C 1338 : 2019 : R2022 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM A 1008/A1008M : 2023 : EDT 1 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable
ASTM A 240/A240M : 2023 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM E 84 : 2021 : REV A Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM A 240/A240M : 2022 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM C 165 : 2007 : R2017 Standard Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM E 96/E96M : 2016 Standard Test Methods for Water Vapor Transmission of Materials
ASTM C 1371 : 2015 : R2022 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM C 1057 : 2017 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer
ASTM C 1136 : 2021 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
ASTM A 240/A240M : 2022 : REV A Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM E 84 : 2023 : REV B Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM A 240/A240M : 2020 : REV A Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM E 119 : 2020 Standard Test Methods for Fire Tests of Building Construction and Materials
ASTM C 1258 : 2021 Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
ASTM C 168 : 2022 Standard Terminology Relating to Thermal Insulation
ASTM D 828 : 2016 : EDT 1 Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
ASTM C 1136 : 2023 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
ASTM E 84 : 2023 : REV A Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM A 1008/A1008M : 2023 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable
ASTM D 828 : 2022 Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
ASTM A 240/A240M : 2023 : REV A Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM E 596 : 1996 : R2016 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM C 1371 : 2015 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers

View more information
£52.59
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.