ASTM C 1825 : 2018 : EDT 1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
19-02-2020
English
01-07-2018
This guide provides general guidance for developing ASTM unit specification for masonry units manufactured with constituent materials, manufacturing methods, and combinations thereof, that are not included in a current ASTM standard.
1.1This guide provides general guidance for developing ASTM unit specification for masonry units manufactured with constituent materials, manufacturing methods, and combinations thereof, that are not included in a current ASTM standard. This guide shall not be construed as permitting the use of a product conflicting with requirements of the governing building code.
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
C 15
|
| DocumentType |
Guide
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM C 1232 : 2009 : REV B | Standard Terminology of Masonry |
| ASTM C 1601 : 2006 | Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces |
| ASTM C 1314 : 2011 : REV A | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1180 : 2010 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1314 : 2016 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM D 3345 : 1974 : R1999 | Standard Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites |
| ASTM C 1180 : 2003 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1232 : 2015 : REV A | Standard Terminology of Masonry |
| ASTM C 1314 : 2002 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1314 : 2009 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM D 3273 : 2000 : R2005 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM C 1232 : 2017 | Standard Terminology for Masonry |
| ASTM D 3273 : 2012 : EDT 1 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM C 1180 : 2002 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM D 3273 : 2012 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM C 1363 : 2019 | Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus |
| ASTM C 1072 : 2012 | Standard Test Methods for Measurement of Masonry Flexural Bond Strength |
| ASTM D 3273 : 1986 : R1991 : EDT 1 | Standard Test Method for Resistance to Growth of Moid on the Surface of Interior Coatings in an Enviormental Chamber |
| ASTM C 1363 : 2005 | Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus |
| ASTM C 1601 : 2008 | Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces |
| ASTM C 1363 : 1997 | Standard Test Method for the Thermal Performance of Building Assemblies by Means of a Hot Box Apparatus |
| ASTM C 1232 : 2005 | Standard Terminology of Masonry |
| ASTM C 1072 : 2010 | Standard Test Method for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1601 : 2011 | Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces |
| ASTM C 1601 : 2005 | Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces |
| ASTM C 1180 : 2018 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1232 : 2015 | Standard Terminology of Masonry |
| ASTM C 1232 : 2008 | Standard Terminology of Masonry |
| ASTM C 1180 : 2003 : REV A : EDT 1 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1072 : 2000 : REV A | Standard Test Method for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1314 : 2012 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM D 3345 : 2017 | Standard Test Method for Laboratory Evaluation of Solid Wood for Resistance to Termites |
| ASTM C 1180 : 2003 : REV A | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1232 : 2010 : REV C | Standard Terminology of Masonry |
| ASTM C 1314 : 2003 : REV A | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM D 3345 : 2008 | Standard Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites |
| ASTM C 1314 : 2018 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1314 : 2007 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1314 : 2001 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1363 : 2011 | Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus |
| ASTM C 1232 : 2001 | Standard Terminology of Masonry |
| ASTM C 1232 : 2010 | Standard Terminology of Masonry |
| ASTM C 1072 : 2005 : REV A | Standard Test Method for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1601 : 2014 : REV A | Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces |
| ASTM C 1314 : 2011 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1232 : 2009 | Standard Terminology of Masonry |
| ASTM D 3273 : 2000 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM C 1072 : 2011 | Standard Test Methods for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1180 : 2007 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1232 : 2010 : REV B | Standard Terminology of Masonry |
| ASTM C 1072 : 2005 | Standard Test Method for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1601 : 2014 | Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces |
| ASTM C 1072 : 2005 : REV B | Standard Test Method for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1601 : 2009 | Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces |
| ASTM C 1314 : 2014 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1232 : 2002 | Standard Terminology of Masonry |
| ASTM C 1072 : 2013 | Standard Test Methods for Measurement of Masonry Flexural Bond Strength |
| ASTM D 3273 : 2016 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM C 1232 : 2000 | Standard Terminology of Masonry |
| ASTM C 1072 : 2006 | Standard Test Method for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1314 : 2000 : REV A | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1232 : 2009 : REV A | Standard Terminology of Masonry |
| ASTM C 1232 : 2012 | Standard Terminology of Masonry |
| ASTM C 1072 : 2013 : EDT 1 | Standard Test Methods for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1601 : 2004 | Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces |
| ASTM C 1314 : 2010 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1232 : 2010 : REV A | Standard Terminology of Masonry |
| ASTM C 1314 : 2003 : REV B | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1180 : 2000 : REV A | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1314 : 2002 : REV A | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1601 : 2010 | Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.