• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM C 192/C192M : 2000

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
Available format(s)

Hardcopy , PDF

Superseded date

11-11-2014

Language(s)

English

Published date

31-12-2010

1.1 This practice covers procedures for making and curing test specimens of concrete in the laboratory under accurate control of materials and test conditions using concrete that can be consolidated by rodding or vibration as described herein.

1.2 The values stated in either inch-pound units or SI units shall be regarded separately as standard. The SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of each other. Combining values from the two systems may result in nonconformance.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
C 09
DocumentType
Standard Practice
Pages
8
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

ASTM D 5139 : 2019 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
ASTM A 1096/A1096M : 2015 Standard Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement
ASTM C 157/C157M : 2017 Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
ASTM C 1116/C1116M : 2010 : REV A : R2015 Standard Specification for Fiber-Reinforced Concrete
ASTM C 1800/C1800M : 2016 Standard Test Method for Determining Density of Roller-Compacted Concrete Specimens Using the Gyratory Compactor
ASTM C 1602/C1602M : 2018 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
ASTM C 1231/C1231M : 2015 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens
ASTM C 470/C470M : 2015 Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
ASTM C 469/C469M : 2014 : EDT 1 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
ASTM C 1688/C1688M : 2014 : REV A Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete (Withdrawn 2023)
ASTM C 928/C928M : 2020 : REV A Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
ASTM C 293/C293M : 2016 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM C 858 : 2019 Standard Specification for Underground Precast Concrete Utility Structures
ASTM C 39/C39M : 2020 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 232/C232M : 2020 Standard Test Method for Bleeding of Concrete
ASTM C 465 : 2019 Standard Specification for Processing Additions for Use in the Manufacture<brk/> of Hydraulic Cements
ASTM C 1176/C1176M : 2020 Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
ASTM C 1293 : 2020 : REV A Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
ASTM C 1439 : 2019 Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
ASTM C 1698 : 2019 Standard Test Method for Autogenous Strain of Cement Paste and Mortar
ASTM C 862 : 2016 : R2020 Standard Practice for Preparing Refractory Concrete Specimens by Casting
ASTM C 878/C878M : 2014 : REV A Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete
ASTM C 1747/C1747M : 2013 Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion (Withdrawn 2022)
ASTM C 1712 : 2020 Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test
ASTM C 827/C827M : 2016 Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
ASTM C 494/C494M : 2019 Standard Specification for Chemical Admixtures for Concrete
ASTM C 1856/C1856M : 2017 Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete
ASTM C 1579 : 2013 Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)
ASTM C 1904 : 2020 Standard Test Methods for Determination of the Effects of Biogenic Acidification on Concrete Antimicrobial Additives and/or Concrete Products
ASTM C 1757 : 2013 Standard Test Method for Determination of One-Point, Bulk Water Sorption of Dried Concrete (Withdrawn 2022)
ASTM C 666/C666M : 2015 Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing (Withdrawn 2024)
ASTM C 1768/C1768M : 2012 : R2017 Standard Practice for Accelerated Curing of Concrete Cylinders
ASTM C 233/C233M : 2018 Standard Test Method for Air-Entraining Admixtures for Concrete
ASTM A 1081/A1081M : 2015 Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand
ASTM C 226 : 2019 Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
ASTM D 7958/D7958M : 2017 Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test
ASTM G 109 : 2007 : R2013 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
ASTM C 563 : 2020 Standard Guide for Approximation of Optimum SO<inf>3</inf> in Hydraulic Cement
ASTM C 1646/C1646M : 2016 Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
ASTM C 567/C567M : 2019 Standard Test Method for Determining Density of Structural Lightweight Concrete
ASTM C 110 : 2020 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
ASTM C 1610/C1610M : 2019 Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
ASTM C 1776/C1776M : 2017 Standard Specification for Wet-Cast Precast Modular Retaining Wall Units
ASTM C 1399/C1399M : 2010 : R2015 Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete (Withdrawn 2024)
ASTM C 918/C918M : 2020 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
ASTM D 7705/D7705M : 2012 : R2019 Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction
ASTM C 1622/C1622M : 2010 : R2016 : EDT 1 Standard Specification for Cold-Weather Admixture Systems
ASTM D 7914/D7914M : 2021 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM C 1585 : 2020 Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
ASTM C 78/C78M : 2018 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C 403/C403M : 2016 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
ASTM C 943 : 2017 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
ASTM C 1758/C1758M : 2015 Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete
ASTM C 330/C330M : 2017 : REV A Standard Specification for Lightweight Aggregates for Structural Concrete
ASTM D 1985 : 2013 : R2019 Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks
ASTM C 341/C341M : 2018 Standard Practice for Preparation and Conditioning of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change Measurements
ASTM C 882/C882M : 2020 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
ASTM D 4832 : 2016 : EDT 1 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
ASTM C 1753/C1753M : 2015 : EDT 1 Standard Practice for Evaluating Early Hydration of Hydraulic Cementitious Mixtures Using Thermal Measurements
ASTM C 496/C496M : 2017 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
ASTM C 1824 : 2016 : R2021 Standard Test Method for Full Scale Bending Test of Spun Prestressed Concrete Bases for Tapered Steel Lighting Poles
ASTM C 979/C979M : 2016 Standard Specification for Pigments for Integrally Colored Concrete
ASTM C 1609/C1609M : 2019 : REV A Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C 512/C512M : 2015 Standard Test Method for Creep of Concrete in Compression
ASTM C 1556 : 2011 : REV A : R2016 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
ASTM C 231/C231M : 2017 : REV A Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
ASTM C 1074 : 2019 : EDT 1 Standard Practice for Estimating Concrete Strength by the Maturity Method
ASTM C 215 : 2019 Standard Test Method for Fundamental Transverse, Longitudinal, and<brk/> Torsional Resonant Frequencies of Concrete Specimens
ASTM D 7913/D7913M : 2014 : R2020 Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
ASTM C 1017/C1017M : 2013 : EDT 1 Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete (Withdrawn 2022)
ASTM A 955/A955M : 2020 : REV C Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
ASTM A 944 : 2010 : R2015 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
ASTM E 660 : 1990 : R2015 Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
ASTM C 796/C796M : 2019 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
ASTM C 1792 : 2014 Standard Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes (Withdrawn 2023)
ASTM C 387/C387M : 2017 Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
ASTM C 1581/C1581M : 2018 : REV A Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
ASTM C 1202 : 2019 Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration

View more information
£62.61
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.