• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM C 192/C192M : 2016-04

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE LABORATORY
Superseded date

26-08-2020

Published date

01-04-2016

CONTAINED IN VOL. 04.02, 2016 Specifies procedures for making and curing test specimens of concrete in the laboratory under accurate control of materials and test conditions using concrete that can be consolidated by rodding or vibration as described herein.

Committee
C 09
DevelopmentNote
Supersedes ASTM C 192 (10/2000)
DocumentType
Redline
PublisherName
American Society for Testing and Materials
Status
Superseded

ACI 305.1 : 2014 SPECIFICATION FOR HOT WEATHER CONCRETING
ACI SP 314 : 2017 ECO-EFFICIENT AND SUSTAINABLE CONCRETE INCORPORATING RECYCLED POST-CONSUMER AND INDUSTRIAL BYPRODUCTS
ASTM E 660 : 1990 : R2015 Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
ASTM C 1144 : 1989 : R1997 Standard Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms
ASTM C 1622/C1622M : 2010 Standard Specification for Cold-Weather Admixture Systems
AWWA C304 : 2014 DESIGN OF PRESTRESSED CONCRETE CYLINDER PIPE
ASTM C 1439 : 2013 : REDLINE Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
ASTM C 1646/C1646M : 2016 : REDLINE Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
ASTM C 672/C672M : 2012 Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals (Withdrawn 2021)
ASTM C 827 : 2001 : REV A Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
ASTM C 469/C469M : 2014 : REDLINE Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression
ASTM C 1753 : 2015 Standard Practice for Evaluating Early Hydration of Hydraulic Cementitious Mixtures Using Thermal Measurements
ASTM C 1556 : 2011 : REV A Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
ASTM C 1116/C1116M : 2010 : REV A : R2015 Standard Specification for Fiber-Reinforced Concrete
ASTM C 512/C512M : 2015 : REDLINE Standard Test Method for Creep of Concrete in Compression
ASTM C 1293 : 2008 : REV B : R2015 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
ASTM C 470/C470M : 2015 : REDLINE Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
ASTM C 1556 : 2011 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
ASTM E 660 : 1990 : R2007 Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
ASTM D 1985 : 2013 Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks
ASTM C 1760 : 2012 Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete (Withdrawn 2021)
ASTM C 827 : 2001 Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
ASTM C 1579 : 2013 : REDLINE Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)
ASTM E 660 : 1990 : R2002 Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
ASTM C 918/C918M : 2013 : REDLINE Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
ASTM C 1293 : 2008 : REV A Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
ASTM C 1698 : 2009 Standard Test Method for Autogenous Strain of Cement Paste and Mortar
ASTM A 944 : 2010 : R2015 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
ASTM D 7914/D7914M : 2014 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM C 1792 : 2014 Standard Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes (Withdrawn 2023)
CSA A23.1 A23.2 : 2014 CONCRETE MATERIALS AND METHODS OF CONCRETE CONSTRUCTION/TEST METHODS AND STANDARD PRACTICES FOR CONCRETE
ACI 211.3R : 2002 GUIDE FOR SELECTING PROPORTIONS FOR NO-SLUMP CONCRETE
AASHTO TP 96 : 2013 (R2018) METHOD OF TEST FOR PROTECTIVE SEALERS FOR PORTLAND CEMENT CONCRETE
ACI 363R : 2010 REPORT ON HIGH-STRENGTH CONCRETE
ASTM C 496/C496M : 2017 : REDLINE Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
ASTM C 827 : 2001 : REV A : R2005 Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
AASHTO TP 110 : 2014 METHOD OF TEST FOR POTENTIAL ALKALI REACTIVITY OF AGGREGATES AND EFFECTIVENESS OF ASR MITIGATION MEASURES (MINIATURE CONCRETE PRISM TEST, MCPT)
ASTM C 403/C403M : 2016 : REDLINE Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
ASTM C 1712 : 2017 : REDLINE Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test
ASTM C 469 : 2002 : EDT 1 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
ASTM C 1768/C1768M : 2012 Standard Practice for Accelerated Curing of Concrete Cylinders
NSF 61 : 2017 DRINKING WATER SYSTEM COMPONENTS - HEALTH EFFECTS
ASTM C 387/C387M : 2017 : REDLINE Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
ASTM C 330 : 2005 Standard Specification for Lightweight Aggregates for Structural Concrete
ACI 228.1R : 2003 IN-PLACE METHODS TO ESTIMATE CONCRETE STRENGTH
ACI ITG-8R : 2010 REPORT ON PERFORMANCE-BASED REQUIREMENTS FOR CONCRETE
ACI 301 : 2016 SPECIFICATIONS FOR STRUCTURAL CONCRETE
ACI 306R : 2016 GUIDE TO COLD WEATHER CONCRETING
AASHTO T 197M/T 197 : 1900 METHOD OF TEST FOR TIME OF SETTING OF CONCRETE MIXTURES BY PENETRATION RESISTANCE
ASTM C 1670 : 2013 Standard Specification for Adhered Manufactured Stone Masonry Veneer (AMSMV) Units
ASTM C 928 : 2005 Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
ASTM C 1757 : 2013 Standard Test Method for Determination of One-Point, Bulk Water Sorption of Dried Concrete (Withdrawn 2022)
ASTM A 1096/A1096M : 2015 Standard Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement
ASTM C 827/C827M : 2016 : REDLINE Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
ASTM C 78/C78M : 2018 : REDLINE Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C 1800/C1800M : 2016 Standard Test Method for Determining Density of Roller-Compacted Concrete Specimens Using the Gyratory Compactor
ASTM C 1116/C1116M : 2010 Standard Specification for Fiber-Reinforced Concrete
ASTM D 7913/D7913M : 2014 Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
ASTM A 944 : 2010 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
ASTM A 955/A 955M : 2018-02 SPECIFICATION FOR DEFORMED AND PLAIN STAINLESS-STEEL BARS FOR CONCRETE REINFORCEMENT
ASTM C 882 : 2005 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
ASTM C 567 : 2005 : REV A Standard Test Method for Determining Density of Structural Lightweight Concrete
ASTM C 1622/C1622M : 2010 : R2016 : EDT 1 Standard Specification for Cold-Weather Admixture Systems
ASTM C 1758/C1758M : 2015 : REDLINE Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete
ACI 305.1M : 2014 SPECIFICATION FOR HOT WEATHER CONCRETING (METRIC)
ASTM C 979 : 2005 Standard Specification for Pigments for Integrally Colored Concrete
ASTM C 1856/C1856M : 2017 Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete
ISO 1920-2:2016 Testing of concrete Part 2: Properties of fresh concrete
AASHTO T 198 : 2015(R2019) Standard Method of Test for Splitting Tensile Strength of Cylindrical Concrete Specimens<br>
ACI PRC-363.2 : 2011 GUIDE TO QUALITY CONTROL AND ASSURANCE OF HIGH-STRENGTH CONCRETE
ACI 350M : 2006 METRIC CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY
ACI 350.5 : 2012 SPECIFICATIONS FOR ENVIRONMENTAL CONCRETE STRUCTURES
ACI 223R : 2010 GUIDE FOR THE USE OF SHRINKAGE-COMPENSATING CONCRETE
ACI 211.4R : 2008 GUIDE FOR SELECTING PROPORTIONS FOR HIGH-STRENGTH CONCRETE USING PORTLAND CEMENT AND OTHER CEMENTITIOUS MATERIALS
ASTM C 1698 : 2009 : R2014 Standard Test Method for Autogenous Strain of Cement Paste and Mortar
ASTM C 943 : 2017 : REDLINE Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
ASTM C 494/C494M : 2017 : REDLINE Standard Specification for Chemical Admixtures for Concrete
ASTM C 666/C666M : 2015 : REDLINE Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing
ASTM C 882/C882M : 2013-08 TEST METHOD FOR BOND STRENGTH OF EPOXY-RESIN SYSTEMS USED WITH CONCRETE BY SLANT SHEAR
ASTM C 1176/C1176M : 2013 : REDLINE Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
ASTM C 157/C157M : 2017 : REDLINE Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
CSA S806: 2012 DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS
S806-12 (R2017) Design and construction of building structures with fibre-reinforced polymers
ASTM A 1081/A1081M : 2015 : REDLINE Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand
ASTM G 109 : 2007 : R2013 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
ASTM C 928/C928M : 2013 : REDLINE Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
AASHTO PP 89 : 2018 Standard Practice for Grinding the Ends of Cylindrical Concrete Specimens<br>
ACI 211.2 : 1998 SELECTING PROPORTIONS FOR STRUCTURAL LIGHTWEIGHT CONCRETE
AASHTO TP 96 : 2013 METHOD OF TEST FOR PROTECTIVE SEALERS FOR PORTLAND CEMENT CONCRETE
ASTM C 684 : 1999 : R2003 Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens (Withdrawn 2012)
ASTM C 1293 : 2008 : REV B Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
AWWA C301 : 2014 PRESTRESSED CONCRETE PRESSURE PIPE, STEEL-CYLINDER TYPE
ASTM C 1610/C1610M : 2017 : REDLINE Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
ASTM C 567/C567M : 2014 : REDLINE Standard Test Method for Determining Density of Structural Lightweight Concrete
ACI 350 : 2006 CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY
ACI 305R : 2010 GUIDE TO HOT WEATHER CONCRETING
ASTM C 1231/C1231M : 2015 : REDLINE Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens
ACI 311.5R : 2004 GUIDE FOR CONCRETE PLANT INSPECTION AND TESTING OF READY-MIXED CONCRETE
ACI 301M : 2016 SPECIFICATIONS FOR STRUCTURAL CONCRETE
ASTM C 1399/C1399M : 2010 Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
ASTM C 1116/C1116M : 2010 : REV A Standard Specification for Fiber-Reinforced Concrete
ASTM G 109 : 2007 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
ASTM C 1556 : 2011 : REV A : R2016 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
ASTM C 796 : 2004 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
ASTM C 226 : 2012 : REDLINE Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
ASTM C 567 : 2005 Standard Test Method for Determining Density of Structural Lightweight Concrete
ASTM D 7705/D7705M : 2012 Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction
ASTM E 660 : 1990 : R1996 Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
ASTM C 39/C39M : 2018 : REDLINE Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 1776/C1776M : 2017 Standard Specification for Wet-Cast Precast Modular Retaining Wall Units
ACI 548.1R : 2009 GUIDE FOR THE USE OF POLYMERS IN CONCRETE
ASTM C 1144 : 1989 : R2011 Standard Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms (Withdrawn 2018)
ASTM C 862 : 2016 : REDLINE Standard Practice for Preparing Refractory Concrete Specimens by Casting
ACI 314R : 2016 GUIDE TO SIMPLIFIED DESIGN FOR REINFORCED CONCRETE BUILDINGS
ASTM C 1747/C1747M : 2013 : REDLINE Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion
ASTM C 469 : 2002 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
AWWA C302 : 2016 REINFORCED CONCRETE PRESSURE PIPE, NONCYLINDER TYPE
ASTM C 1585 : 2013 : REDLINE Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
AASHTO TP 118 : 2015 METHOD OF TEST FOR CHARACTERIZATION OF THE AIR-VOID SYSTEM OF FRESHLY MIXED CONCRETE BY THE SEQUENTIAL PRESSURE METHOD
ASTM D 7958/D7958M : 2017 Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test
ASTM C 1144 : 1989 : R2004 Standard Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms
ASTM C 1399/C1399M : 2010 : R2015 Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete (Withdrawn 2024)
ASTM C 979/C979M : 2016 : REDLINE Standard Specification for Pigments for Integrally Colored Concrete
ASTM C 684 : 1999 Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens
ASTM C 1176 : 2005 Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
ASTM E 660 : 1990 : R2011 Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
ASTM C 1768/C1768M : 2012 : R2017 Standard Practice for Accelerated Curing of Concrete Cylinders
ASTM C 215 : 2014 : REDLINE Standard Test Method for Fundamental Transverse, Longitudinal, and<brk/> Torsional Resonant Frequencies of Concrete Specimens
ASTM C 1245/C1245M : 2012 : REDLINE Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test)
ASTM C 918 : 2002 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
ASTM C 796/C796M : 2012 : REDLINE Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
ACI 330.2R:2017(R2023) Guide for the Design and Construction of Concrete Site Paving for Industrial and Trucking Facilities

ASTM C 403/C403M : 2016 : REDLINE Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
ASTM C 70 : 2013 : REDLINE Standard Test Method for Surface Moisture in Fine Aggregate
ASTM C 566 : 2013 : REDLINE TEST METHOD FOR TOTAL EVAPORABLE MOISTURE CONTENT OF AGGREGATE BY DRYING
ASTM C 617/C617M : 2015 : REDLINE Standard Practice for Capping Cylindrical Concrete Specimens
ASTM C 127 : 2015 : REDLINE Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
ASTM C 470/C470M : 2015 : REDLINE Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
ASTM C 1077 : 2017 : REDLINE Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C 173/C173M : 2016 : REDLINE Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C 172/C172M : 2017 : REDLINE Standard Practice for Sampling Freshly Mixed Concrete
ASTM C 128 : 2015 : REDLINE Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
ACI 211.3 : 1992(R1997) SELECTING PROPORTIONS FOR NO-SLUMP CONCRETE
ACI 309 : 1982 PRACTICE FOR CONSOLIDATION OF CONCRETE
ASTM C 1064/C1064M : 2017 : REDLINE Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
ASTM C 494/C494M : 2017 : REDLINE Standard Specification for Chemical Admixtures for Concrete

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.