ASTM C 201 : 1993 : R2019
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Test Method for Thermal Conductivity of Refractories
Hardcopy , PDF
05-11-2022
English
07-01-2019
CONTAINED IN VOL. 15.01, 2017 Defines the determination of the comparative thermal conductivity of refractories under standardized conditions of testing.
1.1This test method covers the determination of the comparative thermal conductivity of refractories under standardized conditions of testing. This test method is designed for refractories having a conductivity factor of not more than 200 Btu·in./h·ft2·°F (2818 W/m·K), for a thickness of 1 in. (25 mm).
1.2Detailed ASTM test methods to be used in conjunction with this procedure in testing specific types of refractory materials are as follows: Test Method C182, Test Method C202, Test Method C417, and Test Method C767.
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
C 08
|
| DocumentType |
Test Method
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM C 1470 : 2006 | Standard Guide for Testing the Thermal Properties of Advanced Ceramics |
| ASTM C 1113/C1113M : 2009 | Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique) |
| ASTM C 202 : 1993 : R2004 | Standard Test Method for Thermal Conductivity of Refractory Brick |
| ASTM C 202 : 1993 : R1998 | Standard Test Method for Thermal Conductivity of Refractory Brick |
| ASTM C 1058/C1058M : 2010 | Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation |
| ASTM C 202 : 1993 : R2013 | Standard Test Method for Thermal Conductivity of Refractory Brick |
| BS EN 1094-1:1997 | Insulating refractory products Terminology for ceramic fibre products |
| I.S. EN 1094-1:2008 | INSULATING REFRACTORY PRODUCTS - PART 1: TERMINOLOGY, CLASSIFICATION AND METHODS OF TEST FOR HIGH TEMPERATURE INSULATION WOOL PRODUCTS |
| MIL-I-23128 Revision B:1982 | INSULATION BLANKET, THERMAL, REFRACTORY FIBER, FLEXIBLE |
| ASTM C 767 : 1993 : R2013 | Standard Test Method for Thermal Conductivity of Carbon Refractories |
| ASTM C 1113/C1113M : 2009 : R2013 | Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique) |
| ASTM C 1676/C1676M : 2014 : REDLINE | Standard Specification for Microporous Thermal Insulation |
| ASTM C 1113 : 1999 | Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique) |
| ASTM C 767 : 1993 : R1998 | Standard Test Method for Thermal Conductivity of Carbon Refractories |
| ASTM C 1058/C1058M : 2010 : R2015 | Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation |
| ASTM C 417 : 2005 : R2015 | Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories |
| ASTM C 892 : 2019 | Standard Specification for High-Temperature Fiber Blanket Thermal Insulation |
| ASTM C 182 : 2019 | Standard Test Method for Thermal Conductivity of Insulating Firebrick |
| ASTM C 202 : 2019 | Standard Test Method for Thermal Conductivity of Refractory Brick |
| ASTM C 1470 : 2020 | Standard Guide for Testing the Thermal Properties of Advanced Ceramics |
| ASTM C 1676/C1676M : 2019 | Standard Specification for Microporous Thermal Insulation |
| ASTM C 767 : 2020 | Standard Test Method for Thermal Conductivity of Carbon Refractories |
| ASTM C 417 : 2021 | Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories |
| ASTM C 1685 : 2015 : R2021 | Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications |
| ASTM C 767 : 1993 : R2009 | Standard Test Method for Thermal Conductivity of Carbon Refractories |
| ASTM C 182 : 1988 : R2013 | Standard Test Method for Thermal Conductivity of Insulating Firebrick |
| API 560 : 2016 | FIRED HEATERS FOR GENERAL REFINERY SERVICE |
| DIN EN 1094-1:2008-09 | INSULATING REFRACTORY PRODUCTS - PART 1: TERMINOLOGY, CLASSIFICATION AND METHODS OF TEST FOR HIGH TEMPERATURE INSULATION WOOL PRODUCTS |
| ASTM C 1685 : 2015 : REDLINE | Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications |
| UNI EN 1094-1 : 2008 | INSULATING REFRACTORY PRODUCTS - PART 1: TERMINOLOGY, CLASSIFICATION AND METHODS OF TEST FOR HIGH TEMPERATURE INSULATION WOOL PRODUCTS |
| ASTM C 1113/C1113M : 2009 : R2019 | Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique) |
| ASTM C 182 : 1988 : R2004 | Standard Test Method for Thermal Conductivity of Insulating Firebrick |
| ASTM C 182 : 1988 : R2009 | Standard Test Method for Thermal Conductivity of Insulating Firebrick |
| ASTM C 417 :2005 | Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories |
| ASTM C 202 : 1993 : R2009 : EDT 1 | Standard Test Method for Thermal Conductivity of Refractory Brick |
| ASTM C 417 : 2005 : R2010 : EDT 1 | Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories |
| ASTM C 1470 : 2006 : R2013 | Standard Guide for Testing the Thermal Properties of Advanced Ceramics |
| API 936 : 2014 | REFRACTORY INSTALLATION QUALITY CONTROL - INSPECTION AND TESTING MONOLITHIC REFRACTORY LININGS AND MATERIALS |
| SAE AMS 3679 : 2015 | INSULATION, THERMAL, CERAMIC FIBER |
| ISO/TR 15655:2003 | Fire resistance Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design |
| ASTM C 182 : 1988 : R1998 | Standard Test Method for Thermal Conductivity of Insulating Firebrick |
| ASTM C 1676 : 2008 | Standard Specification for Microporous Thermal Insulation |
| ASTM C 767 : 1993 : R2004 | Standard Test Method for Thermal Conductivity of Carbon Refractories |
| EN 1094-1:2008 | Insulating refractory products - Part 1: Terminology, classification and methods of test for high temperature insulation wool products |
| ASTM C 155 : 1997 : R2022 | Standard Classification of Insulating Firebrick |
| ASTM E 220 : 2019 | Standard Test Method for Calibration of Thermocouples By Comparison Techniques |
| ASTM C 155 : 1997 : R2018 | Standard Classification of Insulating Firebrick |
| ASTM C 417 : 2005 : R2015 | Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories |
| ASTM C 417 : 2021 | Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories |
| ASTM E 220 : 2013 : REDLINE | Standard Test Method for Calibration of Thermocouples By Comparison Techniques |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.