• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM C 449 : 2007 : R2019

Current
Current

The latest, up-to-date edition.

Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-03-2019

CONTAINED IN VOL. 04.06, 2014 Defines mineral fiber (rock or slag) insulating and finishing cement shipped in dry-mix form, including hydraulic-setting binder, which, when mixed with water and applied in accordance with the manufacturer's directions, affords a smooth surface as a final finish for heated surfaces up to 1200 degrees F (649 degrees C) for specific applications.

1.1This specification covers mineral fiber (rock or slag) insulating and finishing cement shipped in dry-mix form, including hydraulic-setting binder, which, when mixed with water and applied in accordance with the manufacturer's directions, affords a smooth surface as a final finish for heated surfaces up to 1200 °F (649 °C) for specific applications. The actual temperature limit shall be agreed upon between the purchaser and the manufacturer.

Note 1:Precautionary measures should be taken with this material as with other hydraulic-setting mixtures. This material should be used within the time period recommended by the manufacturer.

1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3The following safety hazards caveat pertains only to the test method (Section 10) described in this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4When the installation or use of thermal insulation materials, accessories, and systems pose safety or health problems, the manufacturer shall provide the user with appropriate current information regarding any known problems associated with the recommended use of the company's products and shall also recommend protective measures to be employed in their safe utilization. The user shall establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
C 16
DevelopmentNote
Supersedes ASTM C 449/C449M. (12/2007) Supersedes MIL C 2908 (B). (09/2010)
DocumentType
Standard
Pages
3
ProductNote
Reconfirmed 2007
PublisherName
American Society for Testing and Materials
Status
Current
SupersededBy
Supersedes

ASTM E 136 : 2024 Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C
ASTM C 168 : 2019 Standard Terminology Relating to Thermal Insulation
ASTM C 1045 : 2019 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
ASTM C 177 : 2019 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM C 1114 : 2006 : R2013 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
ASTM C 1114 : 2006 : R2019 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
ASTM C 1045 : 2007 : R2013 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
ASTM C 518 : 2017 : REDLINE Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM C 163 : 2005 : R2023 Standard Practice for Mixing Thermal Insulating Cement Samples
ASTM C 356 : 2022 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
ASTM C 163 : 2005 : R2016 Standard Practice for Mixing Thermal Insulating Cement Samples
ASTM C 1058 : 1997 Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
ASTM E 136 : 2022 Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C
ASTM C 1058 : 2003 Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
ASTM C 1114 : 2006 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
ASTM E 136 : 2019 : REV A Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750°C
ASTM C 1045 : 2001 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
ASTM C 518 : 2002 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM C 356 : 2017 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
ASTM C 356 : 2017 : REDLINE Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
ASTM C 1114 : 2000 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
ASTM C 518 : 2017 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM C 166 : 2005 : R2023 Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
ASTM C 518 : 2021 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM C 1114 : 2000 : R2006 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
ASTM C 1045 : 1997 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
ASTM C 795 : 2008 : R2023 Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
ASTM C 166 : 2005 : R2016 Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
ASTM C 177 : 2019 : EDT 1 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM C 168 : 2022 Standard Terminology Relating to Thermal Insulation
ASTM C 1058 : 2003 : R2008 Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
ASTM C 795 : 2008 : R2018 Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
ASTM C 795 : 2008 Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
ASTM C 1045 : 2007 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
ASTM C 795 : 1992 : R1998 : EDT 1 Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
ASTM C 168 : 2017-06 TERMINOLOGY RELATING TO THERMAL INSULATION
ASTM C 518 : 1998 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

View more information
£45.92
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.