Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes

Available format(s)

PDF

Language(s)

English

Published date

01-04-2014

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 15.05, 2015 Specifies information on sampling and preparing solutions of engine coolants and antirusts.

1.1This practice covers information on sampling and preparing solutions of engine coolants and antirusts (Notes 1 and 2).

1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are approximate equivalents given for information only.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Note 1—Antirust as referred to in this practice covers products intended for use in automotive/light-duty and heavy-duty applications in which water is used as the cooling medium.

Note 2—Antirust products are available in liquid and solid form. Solids should be handled as outlined in Annex A1.

Committee	D 15
DocumentType	Redline
Pages	3
PublisherName	American Society for Testing and Materials
Status	Current

ASTM D 7437 : 2008 : R2013	Standard Test Method for Temperature and Hard Water Stability of Engine Coolants
O-A-548 Revision D:1974	ANTIFREEZE COOLANT, ENGINE, ETHYLENE GLYCOL, INHIBITED, CONCENTRATED
MIL-A-8243 Revision D:1985	ANTI-ICING AND DEICING-DEFROSTING FLUIDS
ASTM D 6130 : 2011	Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 6660 : 2001	Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM D 7437:2008	Standard Test Method for Temperature and Hard Water Stability of Engine Coolants
ASTM D 7896 : 2014	Standard Test Method for Thermal Conductivity, Thermal Diffusivity and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
ASTM D 7820 : 2012	Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel
ASTM D 5827 : 2009 : EDT 1	Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 6129 : 1997	Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
ASTM D 2809 : 2009 : R2017	Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 6107 : 1997 : R2012	Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
ASTM D 2809 : 2009	Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 1123 : 1999 : R2003	Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM D 1119 : 2005 : R2009	Standard Test Method for Percent Ash Content of Engine Coolants
ASTM D 6130 : 2011 : R2018	Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 1120 : 2017 : REDLINE	Standard Test Method for Boiling Point of Engine Coolants
ASTM D 1123 : 1999 : R2003 : EDT 1	Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM D 1123 : 1999 : R2003e1	TEST METHODS FOR WATER IN ENGINE COOLANT CONCENTRATE BY THE KARL FISCHER REAGENT METHOD
ASTM D 1122 : 2016	Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 6107 : 1997 : R2017	Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
ASTM D 3147 : 2006 : R2013	Standard Test Method for Testing Stop-Leak Additives for Engine Coolants
ASTM D 6660 : 2001 : R2007	Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM D 4340 : 2019 : REDLINE	Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
ASTM D 1119 : 2005 : R2015	Standard Test Method for Percent Ash Content of Engine Coolants
ASTM D 7304 : 2016 : REDLINE	Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC
ASTM D 3585 : 2008	Standard Specification for ASTM Reference Fluid for Coolant Tests
ASTM D 3634 : 1999 : EDT 1	Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 7736 : 2012 : R2018	Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol
ASTM D 3634 : 1999 : R2005 : EDT 1	Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 3585 : 2008 : R2013	Standard Specification for ASTM Reference Fluid for Coolant Tests
ASTM D 2570 : 2016 : REDLINE	Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 3634 : 1999 : R2005	Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 6660 : 2001 : R2019	Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM D 1881 : 2017 : REDLINE	Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 345 : 2002	Side bearings of the freight wagon bogies. General specifications
MIL-T-37402 Base Document:1977	TESTER, ANTIFREEZE, SOLUTIONS
ASTM D 1384 : 2005 : EDT 1	Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1119 : 2005	Standard Test Method for Percent Ash Content of Engine Coolants
ASTM D 1384 : 2005 : R2012	Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 3634 : 1999 : R2009	Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 6129 : 1997 : R2002	Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
ASTM D 6660 : 2001 : R2014 : EDT 1	Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM D 6107 : 1997 : R2002	Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
ASTM D 1177 : 2017 : REDLINE	Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 1882 : 2017 : REDLINE	Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
ASTM D 1384 : 2005	Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 5827 : 2009 : R2015	Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 3634 : 1999 : R2015	Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 6129 : 1997 : R2007	Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
ASTM D 7934/D7934M : 2014	Standard Test Method for Corrosion of Cast Aluminum Alloys in Non-Aqueous Engine Coolants Under Heat-Rejecting Conditions (Withdrawn 2023)
ASTM D 6107 : 1997 : R2007	Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
ASTM D 7736 : 2012	Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol
ASTM D 7935/D7935M : 2014	Standard Test Method for Corrosion Test for Non-Aqueous Engine Coolants in Glassware
ASTM D 6107 : 1997	Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
ASTM D 3147 : 2006	Standard Test Method for Testing Stop-Leak Additives for Engine Coolants
ASTM D 1123 : 1999	Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM D 5827 : 2009	Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 6660 : 2001 : EDT 1	Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM D 4921 : 1995 : R2006	Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature
ASTM D 1287 : 2011 : REDLINE	Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 1123 : 1999 : R2009	Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
MIL-A-46153 Revision C:1991	ANTIFREEZE, ETHYLENE GLYCOL, INHIBITED, HEAVY DUTY, SINGLE PACKAGE
ASTM D 7933 : 2015	Standard Test Method for Engine Coolant Stagnation in Flux-Brazed Aluminum Heat Exchangers
CGSB 3.532 : M85	ANTIFREEZE, WINDSHIELD WASHER, METHANOL BASE
ASTM D 1121 : 2011 : REDLINE	Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
ASTM D 1122 : 2016 : R2017 : EDT 1	Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 4921 : 1995 : R2000	Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature
ASTM D 4921 : 1995 : R2012	Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature
ASTM D 1123 : 1999 : R2015	Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM D 6129 : 1997 : R2015	Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy