• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 1349 : 2014 : R2019

Current
Current

The latest, up-to-date edition.

Standard Practice for Rubber—Standard Conditions for Testing
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-11-2019

1.1Reliable comparisons between different rubber compounds and between different laboratories is an essential component of effective testing.

1.2It is necessary to standardize the temperature and humidity conditions to which materials are subjected prior to and during testing.

1.3Section 2 of this practice includes the definition of terms commonly used to describe the conditions of testing.

1.4Section 3 of this practice covers a list of standard test temperatures for testing from which selection may be made for a specification, procedure, practice, standard or method.

1.4.1Any specification, procedure, practice, standard or method that specifies test temperatures shall take precedence over this practice.

1.4.2The standard test temperatures for testing do not apply to preparation, mixing, processing, or vulcanizing temperatures for rubber compounds.

1.5Section 4 of this practice covers a list of standard relative humidity conditions for testing from which selection may be made for a specification, procedure, practice, standard or method.

1.5.1Any specification, procedure, practice, standard or method that specifies relative humidity shall take precedence over this practice.

1.5.2The standard relative humidity conditions for testing do not apply to preparation, mixing, processing, or vulcanizing of rubber compounds, but may serve as a guide when the condition is not specified.

1.6Section 5 of this practice covers the standard conditioning of materials for testing.

1.6.1Any specification, procedure, practice, standard or method that specifies the conditioning of materials for testing shall take precedence over this practice.

1.7Section 6 of this practice includes the keywords associated with this document which may be used in standard document or internet searches.

1.8The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.9This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.10This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 11
DocumentType
Standard Practice
Pages
3
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM D 1646 : 2019 : REV A Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
ASTM D 2240 : 2015 : EDT 1 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 395 : 2018 Standard Test Methods for Rubber Property—Compression Set
ASTM D 2632 : 2015 : R2019 Standard Test Method for Rubber Property—Resilience by Vertical Rebound
ASTM D 573 : 2004 : R2019 Standard Test Method for Rubber—Deterioration in an Air Oven
ASTM D 3389 : 2016 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
ASTM F 1957 : 1999 : R2017 Standard Test Method for Composite Foam Hardness-Durometer Hardness
ASTM D 624 : 2000 : R2012 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D 1460 : 1986 : R2014 Standard Test Method for Rubber Property—Change in Length During Liquid Immersion
ASTM D 2000 : 2018 Standard Classification System for Rubber Products in Automotive Applications
ASTM D 6515 : 2000 : R2016 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM F 2051 : 2000 : R2014 Standard Specification for Implantable Saline Filled Breast Prosthesis
ASTM D 1456 : 1986 : R2014 Standard Test Method for Rubber Property—Elongation at Specific Stress
ASTM F 2468 : 2005 : R2019 Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
ASTM D 7121 : 2005 : R2018 Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum
ASTM D 1630 : 2016 Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader)
ASTM D 412 : 2016 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM F 2042 : 2018 Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication
ASTM D 1052 : 2009 : R2019 Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus
ASTM D 1415 : 2018 Standard Test Method for Rubber Property—International Hardness
ASTM F 1035 : 2003 : R2015 Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System
ASTM F 703 : 2018 Standard Specification for Implantable Breast Prostheses
ASTM D 751 : 2019 Standard Test Methods for Coated Fabrics
ASTM D 5099 : 2008 : R2017 Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry
ASTM F 2508 : 2016 : EDT 1 Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
ASTM D 3575 : 2014 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers
ASTM D 3667 : 2016 Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
ASTM D 3903 : 2015 Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
ASTM G 114 : 2014 Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service
ASTM D 7605 : 2011 : R2016 Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM D 3832 : 1979 : R2017 Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
ASTM F 477 : 2014 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM F 1441 : 2003 : R2014 Standard Specification for Soft-Tissue Expander Devices
ASTM D 3771 : 2015 Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
ASTM D 6601 : 2019 Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
ASTM D 1149 : 2018 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 6746 : 2015 Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds
ASTM D 6147 : 1997 : R2014 Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression
ASTM D 430 : 2006 : R2018 Standard Test Methods for Rubber Deterioration—Dynamic Fatigue
ASTM D 5289 : 2019 : REV A Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D 531 : 2015 : R2019 Standard Test Method for Rubber Property—Pusey and Jones Indentation
ASTM D 865 : 2011 : R2018 Standard Test Method for Rubber—Deterioration by Heating in Air (Test Tube Enclosure)
ASTM D 623 : 2007 : R2019 Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression
ASTM D 813 : 2007 : R2019 Standard Test Method for Rubber Deterioration—Crack Growth
ASTM D 2084 : 2019 : REV A Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter

View more information
£45.92
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.