• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 1475 : 2013 : REDLINE

Current
Current

The latest, up-to-date edition.

Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Available format(s)

PDF

Language(s)

English

Published date

03-01-2014

CONTAINED IN VOL. 06.01, 2017 Defines the measurement of density of paints, inks, varnishes, lacquers, and components thereof, other than pigments, when in fluid form.

1.1This test method covers the measurement of density of paints, inks, varnishes, lacquers, and components thereof, other than pigments, when in fluid form.

1.2For higher precision when working with nonpigmented materials (drying oils, varnishes, resins and related materials), Test Method D1963 can be used to determine specific gravity and, thence, density.

1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3.1Exception—The values for density are to be stated in inch-pound units.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. A specific precaution statement is given in 8.1.1.1.

Committee
D 01
DocumentType
Redline
Pages
6
PublisherName
American Society for Testing and Materials
Status
Current

Standards Relationship
ASTM D 2885 : 2020 : REDLINE Similar to

ASTM C 156 : 2017 : REDLINE Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete
SAE AMS 3116 A : 2005 PRIMER COATING; EPOXY, CHEMICAL AND SOLVENT RESISTANT NON-CHROMATED, CORROSION PREVENTIVE
DOD-E-18214 Revision B:1978 ENAMEL, INTERIOR, DECK, DARK GREEN (FORMULA NO. 19) (METRIC)
SSPC-PAINT 44 : 2013 LIQUID-APPLIED ORGANIC POLYMERIC COATINGS AND LININGS FOR CONCRETE STRUCTURES IN MUNICIPAL WASTEWATER FACILITIES, PERFORMANCE-BASED
MIL-DTL-1115 Revision E:2010 ENAMEL, INTERIOR, ALKYD, WHITE (FORMULA NO. 30)
DOD-E-1265 Revision D:1977 ENAMEL, EXTERIOR, ALKYD, OCEAN GRAY No.17 (FORMULA No 5.0) METRIC
ASTM D 3806 : 1998 : R2004 Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)
ASTM D 5860 : 1995 Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
DWA-M 143-20:2018 TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS
MIL-P-15930 Revision C:1981 PRIMER COATING, SHIPBOARD, VINYL-ZINC CHROMATE (FORMULA NO. 120 - FOR HOT SPRAY)
DOD P 24631 : (1) SUPP 1 PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC)
CSA Z245.20-Z245.21 : 2006 EXTERNAL FUSION BOND EPOXY COATING FOR STEEL PIPE/EXTERNAL POLYETHYLENE COATING FOR PIPE
MIL-PRF-32584 Base Document:2017 Deck Covering Materials, Monolithic
MIL-DTL-24631 Revision A:1997 PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC)
DOD-V-15218 Revision C:1977 VARNISH (MIXING, PHENOLIC) (METRIC)
MIL A 3316 : C ADHESIVE, FIRE RESISTANT, THERMAL INSULATION
DOD-P-15144 Revision B:1977 PAINT, FORMULA NO. 34 (BINDER FOR ANTI SWEAT COATINGS) (METRIC)
MIL-DTL-700 Revision B:1998 ENAMEL, DECK, INTERIOR, GRAY, (FORMULA NO. 20L) (METRIC)
MIL-C-46168 Revision D:1987 COATING, ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT
MIL-DTL-24441 Revision D:2009 PAINT, EPOXY-POLYAMIDE, GENERAL SPECIFICATION FOR
AASHTO M 300 : 2003 SPECIFICATION FOR INORGANIC ZINC-RICH PRIMER
ASTM D 3927 : 1987 Guide for State and Institutional Purchasing of Paint (Withdrawn 1991)
MIL-PRF-32171 Revision B:2009 DECK COATINGS, HIGH DURABILITY
MIL-R-15189 Revision B:1986 RESIN, ALKYD PHENOLIC
MIL P 53030 : A PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE
MIL C 47257 : C COMPOUND, EPOXY, FILAMENT WINDING
TT-P-645 Revision C:2013 PAINT, ALKYD TYPE, FORMULA NUMBER 84
TT-P-641 Revision G:1976 PRIMER, PAINT, ZINC DUST-ZINC OXIDE (FOR GALVANIZED SURFACES)
ASTM D 5860 : 1995 : R2007 Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
ASTM D 5286 : 2001 : R2017 Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints
SAE AMS C 27725 : 2016 COATING, CORROSION PREVENTATIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS, FOR USE TO 250 DEGREES F (121 DEGREES C)
ASTM D 5066 : 1991 : R2017 Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis
SAE AMS 3126 : 2013 Aluminum Coating Material, Corrosion and Heat Resistant Thermosetting, Inorganic Binder
ASTM D 6686 : 2001 : R2008 : EDT 1 Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings
ASTM D 3065 : 2001 : R2013 Standard Test Methods for Flammability of Aerosol Products (Withdrawn 2022)
ASTM D 4142 : 1989 : R2017 Standard Guide for Testing Epoxy Resins
ASTM D 6686 : 2001 Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings
ASTM D 2805 : 2011 : R2018 Standard Test Method for Hiding Power of Paints by Reflectometry
ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM D 6577 : 2015 : REDLINE Standard Guide for Testing Industrial Protective Coatings
ASTM D 6093 : 1997 : R2003 Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D 6532 : 2000 : R2014 Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens
ASTM E 1795 : 2017 : REDLINE Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM D 5860 : 1995 : R2002 Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
ASTM D 5201 : 2005 : REV A Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
ASTM D 8008 : 2015 Standard Practice for Representative Field Sampling of Traffic Paints
ASTM D 6266 : 2000 : REV A Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
ASTM F 940 : 1999 : R2013 Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
ASTM D 5913 : 1996 : R2013 Standard Test Method for Evaluation of Cleanability of Paint Brushes
ASTM E 1868 : 2010 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM F 940:1999 Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
ASTM D 5150 : 1992 : R2017 Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
ASTM D 6237 : 2009 : R2015 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
ASTM D 5913 : 1996 : R2003 Standard Test Method for Evaluation of Cleanability of Paint Brushes
ASTM D 7489 : 2009 Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions
ASTM C 1241 : 2014 : REDLINE Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM D 3925 : 2002 : R2010 Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
ASTM D 961 : 1986 : R1995 : EDT 1 Standard Specification for Dehydrated Castor Oil
ASTM D 5066 : 1991 : R2001 Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints-Weight Basis
ASTM D 7073 : 2005 Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films
ASTM E 1797 : 2012 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM D 3105 : 2017 : REDLINE Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
ASTM D 6093 : 1997 : R2016 Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D 5066 : 1991 : R2011 Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints-Weight Basis
ASTM D 7072 : 2004 Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings
MIL-DTL-53084 Revision B:2011 Primer, Cathodic Electrodeposition, Chemical Agent Resistant
SAE AMS 3109 : 2014 PRIMER, ADHESIVE, ELECTRODEPOSITED -55 TO +82 DEGREES C (-67 TO +180 DEGREES F)
ASTM D 344 : 2011 : R2016 Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts (Withdrawn 2018)
MIL-C-81945 Revision B:1989 COATING COMPOUND, WEAPON INSULATION, INTUMESCENT
MIL L 46147 : B LUBRICANT, SOLID FILM, AIR CURED (CORROSION INHIBITING)
MIL-C-83231 Revision A:1981 COATING, POLYURETHANE, RAIN EROSION RESISTANT FOR EXTERIOR AIRCRAFT AND MISSILE PLASTIC PARTS
SAE AMS 3166 : 2014 SOLVENTS, CLEANING, CLEANING PRIOR TO APPLICATION OF SEALING COMPOUNDS
SSPC-PAINT 38 : 2013 SINGLE-COMPONENT MOISTURE-CURE WEATHERABLE ALIPHATIC POLYURETHANE TOPCOAT, PERFORMANCE-BASED
DOD-P-15328 Revision D:1978 PRIMER (WASH), PRETREATMENT (FORMULA NO. 117 FOR METALS) (METRIC)
MIL P 53022 : B PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE
SAE AMS 3107 : 1983(R2014) PRIMER, ADHESIVE, CORROSION-INHIBITING, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING
DOD E 700 : A ENAMEL, DECK, INTERIOR, GRAY (FORMULA NO.20L) (METRIC)
MIL-P-24351 Revision A:1985 PRIMER COATING, ALKYD, BLUE (FORMULA NO. 6N35-2)
MIL E 15090 : C ENAMEL, EQUIPMENT, LIGHT GRAY (FORMULA NO. 111)
MIL-P-28642 Base Document:1977 PAINT (TOPCOAT), VINYL CHLORIDE ACETATE COPOLYMER, HIGH BUILD (FOR STEEL AND MASONRY)
SSPC-PAINT 45 : 2013 TWO-COMPONENT, THICK-FILM POLYUREA AND POLYUREA/POLYURETHANE HYBRID COATINGS, PERFORMANCE-BASED
SSPC-PAINT 29 : 2014 ZINC DUST PIGMENTED PRIMER, PERFORMANCE-BASED
ASTM D 5066 : 1991 : R1996 : EDT 1 Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints-Weight Basis
MIL-C-82747 Base Document:1988 COATING, POLYURETHANE CLEAR, SAFFLOWER OIL MODIFIED ALKYD
MIL P 24441 : B PAINT, EPOXY POLYAMIDE, GENERAL SPECIFICATION FOR
TT-P-1565 Revision B:1978 PAINT, BOOT TOPPING BLACK
MIL-S-53018 Base Document:1983 SEALER, WELD THROUGH FOR OVERLAPPING SURFACES
SSPC-PAINT 24 : 2016 LATEX EXTERIOR FINISH COAT FOR STEEL SURFACES, PERFORMANCE-BASED
ASTM C 733 : 1993 Standard Test Method for Volume Shrinkage of Latex Sealants (Withdrawn 2000)
DOD-P-24655 Base Document:1985 PAINT, UNDERWATER HULL, ANTICORROSION (METRIC)
DOD E 1115 : C ENAMEL, INTERIOR, ALKYD, WHITE [FORMULA NO.30] METRIC
MIL-P-22298 Revision A:1985 PAINT, BLACK, POLYISOBUTYLENE (FORMULA NO. 133)
TT-P-650 Revision D:1988 PRIMER COATING, LATEX BASE, INTERIOR, WHITE (FOR GYPSUM WALLBOARD, OR PLASTER)
MIL P 53084 : 0 PRIMER, CATHODIC ELECTRODEPOSITION, CHEMICAL AGENT RESISTANT
MIL-DTL-53022 Revision C Interim Revision:2007 PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE
AASHTO MP 24 : 2015(R2018) SPECIFICATION FOR WATERBORNE WHITE AND YELLOW TRAFFIC PAINTS
MIL-DTL-53022 Revision E:2012 PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE
ASTM D 6904 : 2003 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry
MIL-C-29475 Base Document:1994 COATING, WATER BORNE POLYURETHANE CAMOUFLAGE
ASTM D 2697 : 2003 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM D 344 : 2011 Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts
ASTM D 5066 : 1991 : R2011 : EDT 1 Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis
ASTM D 3065 : 2001 : R2006 Standard Test Methods for Flammability of Aerosol Products
ASTM D 7489 : 2009 : R2013 Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions
ASTM D 5913 : 1996 : R2009 : EDT 1 Standard Test Method for Evaluation of Cleanability of Paint Brushes
ASTM D 4958 : 2010 Standard Test Method for Comparison of the Brush Drag of Latex Paints
SSPC-PAINT 36 : 2013 TWO-COMPONENT WEATHERABLE ALIPHATIC POLYURETHANE TOPCOAT, PERFORMANCE-BASED
ASTM D 961 : 1986 : R2001 Standard Specification for Dehydrated Castor Oil (Withdrawn 2007)
ASTM D 5286 : 2001 : R2011 Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints
ASTM E 1868 : 2010 : R2015 Standard Test Methods for Loss-On-Drying by Thermogravimetry
ASTM D 3730 : 2017 : REDLINE Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
ASTM F 940 : 1999 : R2009 Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
ASTM D 2697 : 2003 : R2008 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM D 5066 : 1991 : R2005 Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints-Weight Basis
ASTM D 5328 : 1992 : R1997 Standard Test Method for Volatile Organic Compound (VOC40) Content of Non-Heatset Paste Printing Ink Systems at 40 °C (Withdrawn 2001)
ASTM D 5913:1996 Standard Test Method for Evaluation of Cleanability of Paint Brushes
ASTM D 6532 : 2000 : R2006 Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens
ASTM F 718 : 2007 : R2011 : EDT 1 Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
ASTM D 5150 : 1992 : R2013 Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
ASTM D 333 : 2001 : R2007 Standard Guide for Clear and Pigmented Lacquers
ASTM D 3925 : 2002 Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
NACE SP 01 08 : 2008 CORROSION CONTROL OF OFFSHORE STRUCTURES BY PROTECTIVE COATINGS
DOD E 24607 : A ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC)
SAE AMS 3604 : 2015 HEAT RESISTANT ALUMINIZED PAINT
MIL-P-53032 Base Document:1983 PRIMER COATING, WATER REDUCIBLE, EPOXY ESTER LATEX TYPE, LEAD AND CHROMATE FREE
MIL C 81904 : B COATING COMPOUND, THERMAL INSULATION, ABLATIVE
ASTM D 6686 : 2001 : R2013 Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings
AASHTO T 155 : 2013(R2017) METHOD OF TEST FOR WATER RETENTION BY LIQUID MEMBRANE-FORMING CURING COMPOUNDS FOR CONCRETE
CSA Z245.20 SERIES : 2014 PLANT-APPLIED EXTERNAL COATINGS FOR STEEL PIPE
NACE TM 04 04 : 2004 Standard Test Method Offshore Platform Atmospheric and Splash Zone New Construction Coating System Evaluation<br>
MIL-DTL-53030 Revision B Interim Revision:2003 Primer Coating, Epoxy, Water Based, Lead and Chromate Free
MIL L 0046010 : D LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING
DOD-E-18210 Revision B:1978 ENAMEL, INTERIOR, DECK, RED (FORMULA NO. 23) (METRIC)
MIL-P-22299 Revision B:1985 PAINT, ANTIFOULING, POLYISOBUTYLENE (FORMULA NO. 134)
ASTM D 6904 : 2003 : R2013 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry
NASA MSFC SPEC 2083 : 2007 MULTIPROGRAM/PROJECT COMMON USE DOCUMENT FOAM, POLYURETHANE
MIL-DTL-53030 Revision D:2011 Primer Coating, Epoxy, Water Based, Lead and Chromate Free
SSPC-PAINT 23 : 2013 LATEX PRIMER FOR STEEL SURFACES, PERFORMANCE-BASED
MIL-DTL-15090 Revision E:2010 ENAMEL, EQUIPMENT, LIGHT GRAY, (NAVY FORMULA NO. 111)
ASTM D 6532 : 2000 Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens
ASTM D 6093 : 1997 : R2011 Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D 7072 : 2004 : R2013 Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings
AASHTO TP 102 : 2012 METHOD OF TEST FOR EVALUATION OF ASPHALT RELEASE AGENTS (ARAS)
MIL-P-85499 Base Document:1981 PRIMER MATERIAL
MMM-A-180 Revision C:1979 ADHESIVE POLYVINYL ACETATE EMULSION
ASTM D 5150 : 1992 : R2009 Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
MIL-P-15931 Revision F:1991 PAINT, ANTIFOULING, VINYL (FORMULAS NO. 121A, AND 129A)
MIL-P-48333 Base Document:1974 PROPELLANT, LIQUID
ASTM D 7680 : 2010 Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester
MIL P 28641 : 0 PRIMER COATING, VINYL CHLORIDE ACETATE COPOLYMER, HIGH BUILD (FOR STEEL AND MASONRY)
GOST R 52714:2018 Motor gasolines. Determination of individual and group hydrocarbon composition by capillary gas сhromatography method
ASTM F 718 : 2007 Standard for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
SSPC-PS 26.00 : 2016 ALUMINUM-PIGMENTED EPOXY COATING SYSTEM MATERIALS STANDARD, PERFORMANCE-BASED
ASTM D 1392 : 1992 : R1998 Standard Specification for Safflower Oil (Withdrawn 2007)
ASTM D 1823 : 2016 : REDLINE Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
ASTM D 3323 : 1980 : R1988 : EDT 1 Guide for Testing Interior Solvent-Thinned Flat Wall Paints (Withdrawn 1993)
ASTM D 4213 : 2008 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
ASTM D 2697 : 2003 : R2014 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM D 4213 : 2008 : R2012 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
ASTM D 333 : 2001 : R2013 Standard Guide for Clear and Pigmented Lacquers
SSPC-PAINT 46 : 2015 ELASTOMERIC, WATER BASED, HIGH BUILD, FLAT, PERFORMANCE-BASED COATING FOR MASONRY AND CONCRETE
ASTM D 4142 : 1989 : R2001 Standard Guide for Testing Epoxy Resins
ASTM F 718 : 2007 : R2017 Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
ASTM D 4712 : 1987 : REV A : R1996 Standard Guide for Testing Industrial Water-Reducible Coatings
ASTM D 5286 : 2001 : R2005 Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints
ASTM D 7073 : 2005 : R2012 Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films
ASTM D 5201 :2005 Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
ASTM D 6266 : 2000 : REV A : R2017 Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
ASTM D 7489 : 2009 : R2017 Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions
ASTM D 2336 : 1999 Standard Guide for Specifying Factory Applied Wood Coatings (Withdrawn 2008)
ASTM C 461 : 2017 : REDLINE Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
MIL-PRF-62218 Revision B:1996 CORROSION PREVENTIVE COMPOUNDS, COLD APPLICATION (FOR NEW AND FIELD MOTOR VEHICLES AND TRAILERS)
MIL-PRF-24596 Revision B:2009 COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT
ASTM D 5860 : 1995 : R2013 Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
MIL-A-81253 Base Document:1965 ADHESIVE, MODIFIED EPOXY RESIN WITH POLYAMINE CURING AGENT
MIL-PRF-47257 Revision F:2010 COMPOUND, EPOXY, FILAMENT WINDING
MIL-P-47276 Revision B:1991 PRIMER, BONDING
MIL-P-7962 Revision D:1980 PRIMER COATING, CELLULOSE NITRATE MODIFIED ALKYD TYPE, CORROSION INHIBITING, FAST DRYING [FOR SPRAY APPLICATION OVER PRETREATMENT COATING
TT-P-002119 Base Document:1980 PAINT, LATEX BASE, HIGH TRAFFIC AREA, FLAT AND EGGSHELL FINISH (LOW LUSTRE), (FOR INTERIOR USE)
SAE AMS 3117 : 2011 PRIMER ZINC MOLYBDATE
TT-C-499 Revision A:1975 COATING COMPOUND, CHEMICAL RESISTANT, CLEAR
TT-C-530 Revision C:1995 COATING COMPOUND, RUST INHIBITIVE, FISH OIL BASE
NACE SP 01 09 : 2009 FIELD APPLICATION OF BONDED TAPE COATINGS FOR EXTERNAL REPAIR, REHABILITATION, AND WELD JOINTS ON BURIED METAL PIPELINES
MIL L 46010 : D LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING
ASTM D 6763 : 2016 : REDLINE Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents
MIL-P-20088 Revision C:1986 PRESERVATION SOLUTION CONCENTRATE, SONAR SEA CHEST
DOD P 24647 : A (2) PAINT, ANTIFOULING, SHIP HULL (METRIC)
MIL-PRF-14105 Revision E:2011 PAINT, HEAT-RESISTING (FOR STEEL SURFACES)
MIL P 15183 : B NOTICE 1 PAINT, EXTERIOR, ALKYD, GRAY, NO. 11 (FORMULA NO 109) (METRIC)
ASTM D 4142 : 1989 : R1996 : EDT 1 Standard Guide for Testing Epoxy Resins
MIL P 24647 : B PAINT SYSTEM, ANTICORROSIVE & ANTIFOULING, SHIP HULL
ASTM D 3069 : 1994 : R2013 Standard Test Method for Delivery Rate of Aerosol Products (Withdrawn 2022)
ASTM D 115 : 2017 : REDLINE Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation
TT-P-1511 Revision B:1981 PAINT, LATEX (GLOSS & SEMIGLOSS, TINTS & WHITE) (FOR INTERIOR USE)
ASTM D 6904 : 2003 : R2007 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry
ASTM D 5286 : 2001 Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints
SAE AMS 3146 : 2000 COATING, INTERIOR AIRCRAFT CABIN LOW HEAT AND SMOKE RELEASE
ASTM D 4712 : 1987 : REV A : R2001 Standard Guide for Testing Industrial Water-Reducible Coatings
ASTM D 16 : 2016 : REDLINE TERMINOLOGY FOR PAINT, RELATED COATINGS, MATERIALS, AND APPLICATIONS
ASTM D 5150 : 1992 : R1997 : EDT 1 Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
ASTM D 1462 : 1992 : R1998 Standard Specification for Refined Soybean Oil (Withdrawn 2007)
ASTM D 3806 : 1998 Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)
ASTM D 4142 : 1989 : R2009 Standard Guide for Testing Epoxy Resins
ASTM D 6237 : 2009 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
ASTM D 7768 : 2012 Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography
ASTM D 3065 : 2001 Standard Test Methods for Flammability of Aerosol Products
ASTM D 5201 : 2005 : REV A : R2014 Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
ASTM D 333 : 2001 Standard Guide for Clear and Pigmented Lacquers
SSPC-PAINT 39 : 2015 TWO-COMPONENT ALIPHATIC POLYUREA TOPCOAT, FAST- OR MODERATE-DRYING, PERFORMANCE-BASED
ASTM D 5150 : 1992 : R2003 Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
ASTM D 5324 : 2016 : REDLINE Standard Guide for Testing Water-Borne Architectural Coatings
ASTM D 6686 : 2001 : R2008 : EDT 2 Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings
GOST 849:2018 Primary nickel. SpecificationsE
DOD-C-24654 Base Document:1985 COATINGS, EPOXY, PORTABLE WATER TANKS (METRIC)
ASTM F 940 : 1999 : R2005 Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
AASHTO TP 102 : 2012 : R2015 METHOD OF TEST FOR EVALUATION OF ASPHALT RELEASE AGENTS (ARAS)
NACE TM 03 04 : 2004 OFFSHORE PLATFORM ATMOSPHERIC AND SPLASH ZONE MAINTENANCE COATING SYSTEM EVALUATION
MIL-C-81947 Revision A:1975 COATING COMPOUND, THERMAL INSULATION, THREE-COMPONENT, INTUMESCENT
ASTM D 2452 : 2015 : REDLINE Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
TT-C-001951 Base Document:1976 COATING, CLEAR (SATIN FINISH), POLYURETHANE, LATEX, FOR INTERIOR USE
ASTM D 3288 : 2003 Standard Test Methods for Magnet-Wire Enamels
ASTM D 7088 : 2017 Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry
DOD-E-699 Revision D:1978 ENAMEL, EXTERIOR, DECK, GRAY (FORMULA NO.20) (METRIC)
DOD-E-698 Revision C:1978 ENAMEL, ALKYD, DECK, BLACK (FORMULA NO. 24)
AASHTO R 31 : 2009 : R2014 PRACTICE FOR EVALUATION OF PROTECTIVE COATING SYSTEMS FOR STRUCTURAL STEEL
NACE TM 02 04 : 2004 EXTERIOR PROTECTIVE COATINGS FOR SEAWATER IMMERSION SERVICE
DOD-P-15146 Revision B:1977 PAINT, EXTERIOR, DULL BLACK (FORMULA NO. 104) (METRIC)
ASTM D 3806 : 1998 : R2011 Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)
MIL E 15145 : C ENAMEL, ZINC DUST PIGMENTED, FRESH WATER TANK PROTECTIVE, FORMULA NO. 102
MIL-A-82842 Base Document:1983 ADHESIVE, CONDUCTIVE, LOW RESISTIVITY
MIL-A-47284 Revision A:1991 ADHESIVE, EPOXY RESIN BASE
MIL-PRF-24647 Revision E:2013 PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL
ASTM D 8163 : 2017 Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings
ASTM D 3288/D3288M : 2015 : REDLINE Standard Test Methods for Magnet-Wire Enamels
MIL-N-48263 Base Document:1974 1-NITRO-2-PROPANOL (NPL)
ASTM D 3806 : 1998 : R2016 Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)
SAE AMS 3167 : 2005 SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS
ASTM D 2932 : 1980 : R1988 : EDT 1 Guide for Testing Exterior Solvent-Based House and Trim Coatings (Withdrawn 1993)
ASTM D 2805 : 2011 Standard Test Method for Hiding Power of Paints by Reflectometry
ASTM D 7072 : 2004 : R2009 Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings
NACE TM 01 04 : 2004 OFFSHORE PLATFORM BALLAST WATER TANK COATING SYSTEM EVALUATION
ASTM D 6266 : 2000 : REV A : R2011 Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
ASTM D 6266 : 2000 : REV A : R2005 Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
ASTM D 3925 : 2002 : R2015 Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
ASTM D 6093 : 1997 Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D 4712 : 1987 : REV A : R2005 Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014)
ASTM D 6511/D6511M : 2011-07 TEST METHODS FOR SOLVENT BEARING BITUMINOUS COMPOUNDS
ASTM D 2205 : 2015 : REDLINE Standard Guide for Selection of Tests for Traffic Paints
ASTM E 1797 : 2012 : R2017 : EDT 1 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM D 5201 : 2005 : REV A : R2010 Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
ASTM D 4143 : 2016 : REDLINE Standard Guide for Testing Latex Vehicles
ASTM D 4958 : 2010 : R2016 Standard Test Method for Comparison of the Brush Drag of Latex Paints
ASTM D 1641 : 2004 Standard Practice for Conducting Outdoor Exposure Tests of Varnishes (Withdrawn 2013)

ASTM E 180 : 2003 Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals (Withdrawn 2009)

View more information
£55.10
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.