• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 1613 : 2017 : REDLINE

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
Available format(s)

PDF

Superseded date

24-02-2017

Language(s)

English

Published date

24-02-2017

CONTAINED IN VOL. 06.04, 2017 Defines the determination of total acidity as acetic acid, in concentrations below 0.05%, in organic compounds and hydrocarbon mixtures used in paint, varnish, and lacquer solvents and diluents.

1.1This test method covers the determination of total acidity as acetic acid, in concentrations below 0.05 %, in organic compounds and hydrocarbon mixtures used in paint, varnish, and lacquer solvents and diluents. It is known to be applicable to such mixtures as low molecular weight saturated and unsaturated alcohols, ketones, ethers, esters, hydrocarbon diluents, naphtha, and other light distillate petroleum fractions.

1.2For purposes of determining conformance of an observed value or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.

1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4For specific hazard information and guidance consult supplier’s Safety Data Sheet.

1.5This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 01
DevelopmentNote
Supersedes ASTM UOP 809. (10/2010)
DocumentType
Redline
Pages
3
PublisherName
American Society for Testing and Materials
Status
Superseded
Supersedes

ASTM D 4835 : 2008 : R2012 Standard Specification for Propylene Glycol Monomethyl Ether Acetate (Withdrawn 2021)
ASTM D 4837 : 2007 Standard Specification for Propylene Glycol Monomethyl Ether
BS ISO 4925:2005 Road vehicles. Specification of non-petroleum-base brake fluids for hydraulic systems
MIL I 27686 : F INHIBITOR, ICING, FUEL SYSTEM
ASTM D 3728 : 2008 Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade)
CGSB 15.52 : 1992 TECHNICAL GRADE METHYL ETHYL KETONE
ASTM D 3128 : 2007 : R2013 Standard Specification for 2-Methoxyethanol
A-A-3007 Base Document:1996 THINNER, FOR PHENOL-FORMALDEHYDE AND MEDIUM OIL AND STYRENATED ALKYD PAINTS AND VARNISHES
TT-A-511 Revision E:1992 AMYL ACETATE, TECHNICAL
XP M15 029 : 2006 XP AUTOMOTIVE FUELS - PETROL-SUPERETHANOL - REQUIREMENTS AND TEST METHODS
ASTM E 202 : 2012-06 TEST METHODS FOR ANALYSIS OF ETHYLENE GLYCOLS AND PROPYLENE GLYCOLS
ASTM D 330 : 2007 Standard Specification for 2-Butoxyethanol
ASTM D 3329 : 2003 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
ASTM D 2916 : 2009 Standard Specification for Isophorone
ASTM D 4252 : 1989 : R2017 Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates
ASTM D 329 : 2007 : R2013 Standard Specification for Acetone
ASTM D 2634 : 2007 : R2013 Standard Specification for Methyl Amyl Acetate (95 % Grade)
ASTM D 2635 : 2007 : R2012 Standard Specification for Methyl Isobutyl Carbinol (Withdrawn 2021)
ASTM D 5137 : 2007 : R2013 Standard Specification for Hexyl Acetate
ASTM D 2636 : 2007 : R2012 Standard Specification for Hexylene Glycol (Withdrawn 2021)
ASTM D 3893 : 2003 : R2009 Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
ASTM D 3362 : 2005 Standard Test Method for Purity of Acrylate Esters by Gas Chromatography (Withdrawn 2011)
ASTM D 2636 : 2007 Standard Specification for Hexylene Glycol
ASTM D 2917 : 2007 : R2013 Standard Specification for Methyl Isoamyl Ketone
ASTM D 4773 : 2002 : R2007 Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate
ASTM D 3131 : 2007 : R2013 Standard Specification for Isopropyl Acetate (99 % Grade)
ASTM D 4709 : 2007 : R2012 Standard Specification for Methyl Acrylate (Withdrawn 2021)
CEN/TR 15993:2018 Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters required and their respective limits and determination
P-W-2891 Revision A:2002 WIPE SOLVENTS, EXEMPT AND NON-EXEMPT
ISO 4925:2005 Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems
MIL-DTL-27686 Revision G:1997 INHIBITOR, ICING, FUEL SYSTEM
SAE AMS 3166 : 2014 SOLVENTS, CLEANING, CLEANING PRIOR TO APPLICATION OF SEALING COMPOUNDS
ASTM D 319 : 2004 Standard Specification for Amyl Alcohol (Synthetic) (Withdrawn 2010)
ASTM D 4252 : 1989 : R1995 : EDT 1 Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates
O-A-51 Revision H:1992 ACETONE, TECHNICAL
ASTM D 2916 : 2009 : R2017 Standard Specification for Isophorone
CGSB-1.110 : M1991 CORR 1991 GENERAL PURPOSE THINNER FOR LACQUERS
TT-E-781 Revision D:1992 ETHYLENE GLYCOL MONOETHYL ETHER, TECHNICAL
ASTM D 3545 : 2006 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography
SAE J 1704 : 2016 MOTOR VEHICLE BRAKE FLUID BASED UPON GLYCOLS, GLYCOL ETHERS AND THE CORRESPONDING BORATES
ASTM D 1258 : 2005 Standard Test Methods for High-Gravity Glycerin (Withdrawn 2011)
ASTM D 4836 : 2009 Standard Specification for Dipropylene Glycol Monomethyl Ether
ASTM D 2635 : 2007 Standard Specification for Methyl Isobutyl Carbinol
ASTM D 4709 : 2007 Standard Specification for Methyl Acrylate
ASTM D 2804 : 2002 : R2012 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography (Withdrawn 2021)
ASTM D 3329 : 2003 : R2017 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
ASTM D 268 : 2001 : R2007 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
ASTM D 3585 : 2008 Standard Specification for ASTM Reference Fluid for Coolant Tests
ASTM D 3893 : 2003 : R2017 Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
ASTM D 3585 : 2008 : R2013 Standard Specification for ASTM Reference Fluid for Coolant Tests
ASTM D 3548 : 2009 : R2017 Standard Specification for Ethyl Acrylate
ASTM D 1718 : 2009 : R2017 Standard Specification for Isobutyl Acetate (95 % Grade)
ASTM D 268 : 2001 : R2012 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material (Withdrawn 2021)
ASTM D 608 : 2005 : R2019 Standard Specification for Dibutyl Phthalate
ASTM D 2627 : 2008 : R2012 Standard Specification for Diacetone Alcohol (Withdrawn 2021)
ASTM D 345 : 2002 Side bearings of the freight wagon bogies. General specifications
CGSB 1.136 : 1992 ANTIBLUSH THINNER FOR CELLULOSE NITRATE LACQUER
ASTM E 1145 : 1987 : R1992 : EDT 1 Specification for Denatured Ethyl Alcohol, Formula 3A (Withdrawn 1993)
MIL I 85470 : A INHIBITOR, ICING, FUEL SYSTEM, HIGH FLASH
09/30199323 DC : 0 BS EN 15293 - AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL REQUIREMENTS AND TEST METHODS
ASTM D 608 : 2005 : R2011 Standard Specification for Dibutyl Phthalate
03/106442 DC : DRAFT APR 2003 ISO 4925 - ROAD VEHICLES - SPECIFICATION FOR NON-PETROLEUM BASE FLUIDS FOR HYDRAULIC SYSTEMS
MIL-PRF-32295 Revision B:2017 CLEANER, NON-AQUEOUS, LOW-VOC, HAP-FREE
ASTM D 5008 : 2007 : R2012 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography (Withdrawn 2021)
MIL-PRF-32597 Base Document:2018 CLEANER, POLYMER AND POLYMER MATRIX COMPOSITE (PMC) MATERIAL, NON-AQUEOUS, HAP-FREE
ASTM D 4773 : 2002 Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate
ASTM D 4835 : 2008 Standard Specification for Propylene Glycol Monomethyl Ether Acetate
S.R. CEN/TR 15993:2018 AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION
CGSB 1.164 : 1999 SOLVENT FOR VINYL PRETREATMENT COATING
ASTM D 3131 :2007 Standard Specification for Isopropyl Acetate (99 % Grade)
ASTM D 2627 : 2008 Standard Specification for Diacetone Alcohol
ASTM D 2804 : 2002 : R2007 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
PD CEN/TR 15993:2013 Automotive fuels. Ethanol (E85) automotive fuel. Background to the parameters required and their respective limits and determination
ASTM D 4615 : 2012 : REDLINE Standard Specification for n-Butyl Acetate (All Grades)
ASTM D 3541 : 2005 Standard Specification for 2-Ethylhexyl Acrylate
DWA-M 143-20:2018 TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS
CGSB 15.50 : 1992 TECHNICAL GRADE ACETONE
MIL-DTL-83800 Revision B:2009 Propanediol, 1, 2-
ASTM D 2634 : 2007 Standard Specification for Methyl Amyl Acetate (95 % Grade)
ASTM D 3540 : 2012 : REDLINE Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade)
SAE J 1703 : 2016 MOTOR VEHICLE BRAKE FLUID
ASTM D 2917 : 2007 Standard Specification for Methyl Isoamyl Ketone
ASTM D 3547 : 2005 Standard Specification for <i>n</i>-Butyl Acrylate (Withdrawn 2011)
ASTM D 329 : 2007 Standard Specification for Acetone
ASTM D 329 : 2007 : EDT 1 Standard Specification for Acetone <a href="#fn00002"></a>
ASTM D 608 : 2005 Standard Specification for Dibutyl Phthalate
ASTM D 5137 :2007 Standard Specification for Hexyl Acetate
ASTM D 5008 : 2007 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography
ASTM D 3548 : 2009 Standard Specification for Ethyl Acrylate
ASTM D 330 : 2007 : R2013 Standard Specification for 2-Butoxyethanol
ASTM D 3728 : 2008 : R2012 Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade) (Withdrawn 2021)
ASTM D 4252 : 1989 : R2003 Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates
ASTM D 4252 : 1989 : R2009 Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates
GOST 849:2018 Primary nickel. SpecificationsE
ASTM D 4773 : 2002 : R2012 Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate (Withdrawn 2021)
MIL-D-218 Revision B:1981 DIBUTYL PHTHALATE, TECHNICAL (METRIC)
MIL-E-51454 Revision A:1994 ETHYL ALCOHOL (ETHANOL)
ASTM D 3329 : 2003 : R2009 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
MIL-E-7125 Revision A:1982 ETHYLENE GLYCOL MONOETHYL ETHER ACETATE, TECHNICAL
O-E-760 Revision D:1987 ETHYL ALCOHOL (ETHANOL), DENATURED ALCOHOL, PROPRIETARY SOLVENTS & SPECIAL INDUSTRIAL SOLVENTS
ASTM D 1153 : 2012 : REDLINE Standard Specification for Methyl Isobutyl Ketone
ASTM D 4837 : 2007 : R2012 Standard Specification for Propylene Glycol Monomethyl Ether (Withdrawn 2021)
ASTM F 65 : 1968 : R1983 Specification for Primary Amyl Acetate (Mixed Isomers) for Use in Fabricating Electron Devices (Withdrawn 1989)
ASTM D 363 : 1990 : R2000 Standard Specification for Tricresyl Phosphate (Withdrawn 2005)
SAE AMS 3167 : 2005 SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS
ASTM D 2804 : 2002 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM D 3893 : 2003 Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
ASTM E 1177 : 2014 : REDLINE Standard Specification for Engine Coolant Grade Glycol
ASTM D 3128 :2007 Standard Specification for 2-Methoxyethanol
ASTM D 268 : 2001 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
ASTM D 4836 : 2009 : R2017 Standard Specification for Dipropylene Glycol Monomethyl Ether
ASTM D 3545 : 2006 : R2012 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography (Withdrawn 2021)
ASTM D 1718 : 2009 Standard Specification for Isobutyl Acetate (95% Grade)
I.S. CWA 15293:2005 AUTOMOTIVE FUELS - ETHANOL E85 - REQUIREMENTS AND TEST METHODS

ASTM D 7795 : 2015 : REDLINE Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration
ASTM E 200 : 2016 : REDLINE Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis

View more information
£55.10
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.