ASTM D 204 : 2002 : R2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
13-08-2021
English
26-02-2016
CONTAINED IN VOL. 07.01, 2016 Defines sewing threads of any fiber.
1.1These test methods can be used to evaluate sewing threads of any fiber.
1.1.1The test methods in this standard are intended to evaluate only sewing thread taken from thread holders.
1.2These test methods only provide for the measurement of sewing thread physical properties. These test methods do not address any other properties that may be important for the satisfactory performance of sewing threads under particular end use conditions.
1.3These test methods can be used to measure the following properties:
| Sections | |
| Colorfastness to Drycleaning | 73 – 83 |
| Colorfastness to Laundering | 62 – 72 |
| Colorfastness to Water Migration | 84 – 94 |
| Diameter | 43 – 50 |
| Length per Thread Holder | 34 – 42 |
| Shrinkage, Single Strand | 51 – 61 |
| Dry Heat | 58.1 |
| Boiling Water | 58.2 |
| Strength and Elongation | 15 – 21 |
| Single Strand—Conditioned | 19.1.1 |
| Single Strand—Wet | 19.1.2 |
| Loop Strength | 19.2 |
| Knot Strength | 19.3 |
| Twist | 22 – 27 |
| Twist Balance | 28 – 33 |
| Yarn Number | 7 – 14 |
Note 1:For methods covering tests on prepared seams, refer to Test Methods D1683 and D3940.
1.4The values stated in SI units are to be regarded as standard; the values in English units are provided as information only and are not exact equivalents.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
D 13
|
| DocumentType |
Test Method
|
| Pages |
13
|
| ProductNote |
Reconfirmed 2016
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 5822 : 2013 : R2019 | Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions |
| ASTM F 1648 : 1995 : R2013 | Standard Test Methods for Archery Bowstring Component—Serving String Material (Withdrawn 2022) |
| ASTM D 7016/D7016M : 2020 | Standard Test Method to Evaluate Edge Binding Components Used in Mattresses After Exposure to An Open Flame |
| ASTM E 1549/E1549M : 2013 : R2016 | Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
| ASTM D 5446 : 2008 : R2019 | Standard Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints |
| ASTM F 1752 : 1996 : R2014 | Standard Test Method for Archery Bow Component—Cord Material (Withdrawn 2023) |
| ASTM D 4030/D4030M : 2015 | Standard Specification for Glass Fiber Cord and Sewing Thread |
| ASTM D 3823 : 2001 | Standard Practice for Determining Ticket Numbers for Sewing Threads |
| ASTM D 1907 : 1997 | Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method |
| ASTM D 1423 : 2002 | Standard Test Method for Twist in Yarns by Direct-Counting |
| ASTM D 3693 : 2002 : R2016 | Standard Specification for Labeled Length per Holder of Sewing Thread |
| ASTM D 4849 : 2013 : EDT 3 | Standard Terminology Related to Yarns and Fibers |
| ASTM D 2256 : 2002 | Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method |
| ASTM D 2258 : 1999 : R2012 | Standard Practice for Sampling Yarn for Testing |
| ASTM D 2724 : 2007 | Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D 2258 : 1999 | Standard Practice for Sampling Yarn for Testing |
| ASTM D 3823 : 2007 : R2012 | Standard Practice for Determining Ticket Numbers for Sewing Threads |
| ASTM D 4848 : 1998 : R2004 : EDT 1 | Standard Terminology Related to Force, Deformation and Related Properties of Textiles |
| ASTM D 4849 : 2020 | Standard Terminology Related to Yarns and Fibers |
| ASTM D 1907 : 2007 | Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method |
| ASTM D 2258 : 1999 : R2005 | Standard Practice for Sampling Yarn for Testing |
| ASTM D 1907 : 2001 | Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method |
| ASTM D 4849 : 2013 : EDT 2 | Standard Terminology Related to Yarns and Fibers |
| ASTM D 4849 : 2002 : REV A | Standard Terminology Relating to Yarns and Fibers |
| ASTM D 1776 : 1998 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 4849 : 2013 : R2018 | Standard Terminology Related to Yarns and Fibers |
| AATCC EP 1 : 2012 | GRAY SCALE FOR COLOR CHANGE |
| ASTM D 3940 : 1983 | Test Method for Bursting Strength (Load) and Elongation of Sewn Semas of Knit or Woven Stretch Textile Fabrics (Withdrawn 1995) |
| ASTM D 4849 : 2002 : REV B | Standard Terminology Relating to Yarns and Fibers |
| ASTM D 1776 : 1967 : EDT 1 | Standard Method Of Conditioning Textiles And Textile Products For Testing |
| ASTM D 4849 : 2002 : REV B : R2007 : EDT 2 | Standard Terminology Related to Yarns and Fibers |
| ASTM D 2724 : 2003 | Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D 3823 : 2007 | Standard Practice for Determining Ticket Numbers for Sewing Threads |
| ASTM D 1777 : 1996 : R2011 : EDT 1 | Standard Test Method for Thickness of Textile Materials |
| ASTM D 3823 : 1994 | Standard Practice for Determining Ticket Numbers for Sewing Threads |
| ASTM D 4848 : 1998 : R2018 | Standard Terminology Related to Force, Deformation and Related Properties of Textiles |
| ASTM D 2724 : 1987 : R1995 | Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D 4849 : 2002 : REV B : EDT 1 | Standard Terminology Relating to Yarns and Fibers |
| ASTM D 1777 : 1996 : R2002 | Standard Test Method for Thickness of Textile Materials |
| ASTM D 6193 : 2016 : REDLINE | Standard Practice for Stitches and Seams |
| ASTM D 1683 : 2004 | Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics |
| ASTM D 1422 : 1999 : R2008 | Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method |
| ASTM D 76 : 1999 | Standard Specification for Tensile Testing Machines for Textiles |
| ASTM D 4849 : 2002 : REV B : R2007 : EDT 1 | Standard Terminology Related to Yarns and Fibers |
| ASTM D 1776 : 2004 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 1423 : 1999 | Standard Test Method for Twist in Yarns by Direct-Counting |
| ASTM D 1777 : 1996 : R2007 | Standard Test Method for Thickness of Textile Materials |
| ASTM D 1776 : 2008 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 1776 : 2008 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 6193 : 1997 | Standard Practice for Stitches and Seams |
| ASTM D 4848 : 1998 | Standard Terminology of Force, Deformation and Related Properties of Textiles |
| ASTM D 6193 : 2011 | Standard Practice for Stitches and Seams |
| AATCC TM 135 : 2015 | DIMENSIONAL CHANGES OF FABRICS AFTER HOME LAUNDERING |
| ASTM D 6193 : 2009 | Standard Practice for Stitches and Seams |
| ASTM D 1423 : 2002 : R2008 | Standard Test Method for Twist in Yarns by Direct-Counting |
| ASTM D 2724 : 1987 : R2003 | Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D 3693 : 2002 | Standard Specification for Labeled Length per Holder of Sewing Thread |
| ASTM D 2256 : 1997 | Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method |
| ASTM D 1683 : 2007 | Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics |
| ASTM D 3823 : 2007 : R2018 | Standard Practice for Determining Ticket Numbers for Sewing Threads |
| ASTM D 2724 : 2007 : R2011 | Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D 3693 : 2002 : R2010 | Standard Specification for Labeled Length per Holder of Sewing Thread |
| ASTM D 4849 : 2002 : REV B : R2007 | Standard Terminology Relating to Yarns and Fibers |
| ASTM D 3693 : 1991 : R1996 : EDT 1 | Standard Specification for Labeled Length per Holder of Sewing Thread |
| ASTM D 2724 : 2019 | Standard Test Method for Bond Strength of Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D 2724 : 2007 : R2015 | Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D 3693 : 2002 : R2021 | Standard Specification for Labeled Length per Holder of Sewing Thread |
| ASTM D 6193 : 2016 | Standard Practice for Stitches and Seams |
| ASTM D 123 : 2001 | Standard Terminology Relating to Textiles |
| ASTM D 2724 : 2007 : R2011 : EDT 1 | Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics |
| ASTM D 4849 : 2013 | Standard Terminology Related to Yarns and Fibers |
| ASTM D 4849 : 2002 : REV B : R2007 : EDT 3 | Standard Terminology Related to Yarns and Fibers |
| ASTM D 4849 : 2013 : EDT 1 | Standard Terminology Related to Yarns and Fibers |
| ASTM D 1422 : 1999 | Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method |
| ASTM D 6193 : 1997 : R2004 | Standard Practice for Stitches and Seams |
| ASTM D 4848 : 1998 : R2004 | Standard Terminology of Force, Deformation and Related Properties of Textiles |
| ASTM D 2256 : 2002 : R2008 | Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method |
| ASTM D 1683 : 1990 : REV A | Test Method for Failure in Sewn Seams of Woven Fabrics (Withdrawn 1999) |
| ASTM D 4848 : 1998 : R2012 | Standard Terminology Related to Force, Deformation and Related Properties of Textiles |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.