• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 2047 : 2017

Current
Current

The latest, up-to-date edition.

Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-11-2017

1.1This laboratory test method covers the use of the James Machine for the measurement of the static coefficient of friction of polish-coated flooring surfaces with respect to human locomotion safety. Further, this test method also establishes a compliance criterion to meet the requirement for a nonhazardous polished walkway surface. The test method is not intended for use on “wet” surfaces or on surfaces wherein the texture, projections, profile or clearance between the sculptured pattern of the surface does not permit adequate contact between the machine foot and the test surface.

1.2This test method is the only method appropriate for testing polishes for specification compliance with the floor polish static coefficient of friction criterion.

1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 21
DocumentType
Test Method
Pages
5
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM D 4078 : 2002 : R2015 Standard Specification for Water Emulsion Floor Polish
ASTM D 7032 : 2017 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails
ASTM C 1486 : 2018 Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
ASTM D 6205 : 2012 Standard Practice for Calibration of the James Static Coefficient of Friction Machine
ASTM D 3440 : 2013 : R2019 Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes
ASTM D 3757 : 2016 Standard Guide for Preparing Specifications for Solvent-based Floor Polishes
ASTM G 115 : 2010 : R2018 Standard Guide for Measuring and Reporting Friction Coefficients
ASTM F 3059 : 2018 Standard Specification for Fiber-Reinforced Polymer (FRP) Gratings Used in Marine Construction and Shipbuilding
ASTM C 722 : 2018 Standard Specification for Chemical-Resistant Monolithic Floor Surfacings
ASTM D 7031 : 2011 : R2019 Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products

ASTM D 1630 : 2006 : R2012 Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader)
ASTM D 1436 : 1997 Standard Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes
ASTM D 1630 : 2016 : R2021 Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader)
ASTM D 2825 : 2013 Standard Terminology Relating to Polishes and Related Materials
ASTM D 4103 : 1990 : R2016 Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 4103 : 1990 : R2002 Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
ASTM D 6205 : 2020 Standard Practice for Calibration of the James Static Coefficient of Friction Machine
ASTM D 2825 : 2002 Standard Terminology Relating to Polishes and Related Materials
ASTM E 456 : 2002 Standard Terminology for Relating to Quality and Statistics
ASTM C 1028 : 1996 Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method (Withdrawn 2005)
ASTM E 456 : 2013 : REV A : R2022 Standard Terminology Relating to Quality and Statistics
ASTM C 1028 : 2007 : EDT 1 Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method (Withdrawn 2014)
ASTM E 29 : 2002 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 1630 : 1994 : R2000 Standard Test Method for Rubber Property-Abrasion Resistance (Footwear Abrader)
ASTM D 6205 : 2006 Standard Practice for Calibration of the James Static Coefficient of Friction Machine
ASTM D 1436 : 1997 : R2002 Standard Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes
ASTM D 1436 : 2017 Standard Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes
ASTM D 1630 : 2006 Standard Test Method for Rubber Property-Abrasion Resistance (Footwear Abrader)
ASTM D 2825 : 2021 Standard Terminology Relating to Polishes and Related Materials
ASTM D 1436 : 1997 : R2015 Standard Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes
ASTM D 4103 : 1990 : R1995 : EDT 1 Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
ASTM E 456 : 2013 : REV A : R2017 : EDT 5 Standard Terminology Relating to Quality and Statistics
ASTM D 2825 : 2017 Standard Terminology Relating to Polishes and Related Materials
ASTM D 4103 : 2017 Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
ASTM C 1028 : 2007 Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
ASTM D 4103 : 1990 : R2009 Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
ASTM C 1028 : 2006 Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
ASTM D 2825 : 2011 Standard Terminology Relating to Polishes and Related Materials
ASTM D 2825 : 2002 : R2008 Standard Terminology Relating to Polishes and Related Materials
ASTM D 2825 : 2021 : EDT 1 Standard Terminology Relating to Polishes and Related Materials
ASTM D 2825 : 1996 Standard Terminology Relating to Polishes and Related Materials
ASTM D 1436 : 1997 : R2008 Standard Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes
ASTM E 456 : 2013 : REV A : R2017 : EDT 4 Standard Terminology Relating to Quality and Statistics
ASTM E 456 : 2013 : REV A : R2017 : EDT 6 Standard Terminology Relating to Quality and Statistics
ASTM D 6205 : 2012 Standard Practice for Calibration of the James Static Coefficient of Friction Machine
ASTM D 6205 : 1998 Standard Practice for Calibration of the James Static Coefficient of Friction Machine
ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 1630 : 2016 Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader)

View more information
£52.59
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.