• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 2247 : 2015 : REDLINE

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
Available format(s)

PDF

Superseded date

30-12-2015

Language(s)

English

Published date

01-12-2015

CONTAINED IN VOL. 06.01, 2017 Specifies the basic principles and operating procedures for testing water resistance of coatings by exposing coated specimens in an atmosphere maintained at 100% relative humidity so that condensation forms on the test specimens.

1.1This practice covers the basic principles and operating procedures for testing water resistance of coatings by exposing coated specimens in an atmosphere maintained at 100 % relative humidity so that condensation forms on all surfaces of test specimens.

1.2This practice uses the technique of creating a slight temperature differential within the exposure area to form condensation on the coated specimens. As the warmer saturated air passes the cooler specimens, water is deposited onto the specimens in the form of condensation.

1.3This practice places the entire specimen in the exposure area allowing condensation to form on all surfaces. This makes this practice suitable for flat panels as well as large or 3D objects. This practice differs from other methods where condensation is only formed on the front coating surface, while the back surface is outside the exposure area. Other tests may also deposit water droplets on the surface but where the source is not from condensation (for example, water spray).

Note 1:Alternative practices for testing the water resistance of coatings include Practices D870, D1735, and D4585.

1.4This practice is limited to the methods of obtaining, measuring, and controlling the conditions and procedures of tests conducted in 100 % relative humidity. It does not specify specimen preparation, or evaluation of results.

1.5The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 01
DocumentType
Redline
Pages
10
PublisherName
American Society for Testing and Materials
Status
Superseded

MIL-PRF-32239 Revision A:2014 COATING SYSTEM, ADVANCED PERFORMANCE, FOR AEROSPACE APPLICATIONS
MIL-P-28578 Revision B:1988 PAINT, WATER REDUCIBLE, SEMI-GLOSS EXTERIOR AND INTERIOR
MIL-PRF-24712 Revision B:2014 COATINGS, POWDER, THERMOSETTING
AASHTO M 300 : 2003 SPECIFICATION FOR INORGANIC ZINC-RICH PRIMER
MIL-PRF-32171 Revision B:2009 DECK COATINGS, HIGH DURABILITY
AA-F-001165 Revision B Interim Revision:1989 FURNITURE, METAL FRAME, LAMINATED PLASTIC SURFACED PANELS, CASE GOODS AND TABLES
ASTM D 3451 : 2006 : R2017 Standard Guide for Testing Coating Powders and Powder Coatings
ASTM D 7893 : 2013 Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products
ASTM F 1075 : 1997 Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained
ASTM F 1428 : 1992 : R2017 Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
ASTM F 1075 : 1997 : R2008 Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained
ASTM F 1428 : 1992 : R2011 Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
ASTM D 1654 : 2008 : R2016 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
NACE RP 01 76 : 2003 CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION
MIL-DTL-5886 Revision H:2009 CYLINDER, AIRCRAFT OXYGEN, LOW PRESSURE, NONSHATTERABLE
OO-A-373 Revision D:1998 AIR CONDITIONER, SELF CONTAINED SPACE TYPES, WATER, AIR OR EVAPORATIVE COOLED
CSA S808 : 2014 SPECIFICATION FOR FIBRE-REINFORCED POLYMER (FRP) MATERIALS FOR EXTERNALLY REINFORCING STRUCTURES
SAE J 1804 : 2016 CORROSION PREVENTIVE COMPOUND, TOPSIDE VEHICLE CORROSION PROTECTION
SAE J 2551/2 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS
MIL-S-53018 Base Document:1983 SEALER, WELD THROUGH FOR OVERLAPPING SURFACES
ASTM D 3730 : 2017 : REDLINE Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
01/101336 DC : DRAFT JAN 2001 PREN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
TT-P-2756 Revision A:1996 POLYURETHANE COATING - SELF-PRIMING TOPCOAT, LOW VOLATILE ORGANIC COMPOUND (VOC) CONTENT
SAE J 1563 : 2016 GUIDELINES FOR LABORATORY CYCLIC CORROSION TEST PROCEDURES FOR PAINTED AUTOMOTIVE PARTS
ASTM D 1654 : 2008 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM D 345 : 2002 Side bearings of the freight wagon bogies. General specifications
MIL C 81904 : B COATING COMPOUND, THERMAL INSULATION, ABLATIVE
SAE AMS 2483 : 2015 BLACKENING SOLUTION FOR ALUMINUM, TOUCH-UP SOLUTION
TT-S-001992 Base Document:1975 STAIN, LATEX, EXTERIOR FOR WOOD SURFACES
MIL-PRF-85285 Revision E:2012 COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT
ASTM D 3451 : 2006 : R2012 Standard Guide for Testing Coating Powders and Powder Coatings
MIL C 24712 : A COATINGS, POWDER (METRIC)
SAE AS 6449 : 2017 SOLID FILM LUBRICANT
ASTM E 2570 : 2007 Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage
ASTM D 1654 : 2008 : R2016 : EDT 1 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM D 3451 : 2006 Standard Guide for Testing Coating Powders and Powder Coatings
ASTM D 4712 : 1987 : REV A : R1996 Standard Guide for Testing Industrial Water-Reducible Coatings
ASTM F 1075 : 1997 : R2004 Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained
NASA STD 6002 : 2008 APPLYING DATA MATRIX IDENTIFICATION SYMBOLS ON AEROSPACE PARTS
CSA S806: 2012 DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS
NASA STD 6012 : 2012 CORROSION PROTECTION FOR SPACE FLIGHT HARDWARE
S806-12 (R2017) Design and construction of building structures with fibre-reinforced polymers
MIL-HDBK-516 Revision C:2014 AIRWORTHINESS CERTIFICATION CRITERIA
ASTM D 6899 : 2003 Standard Guide for Laboratory Cyclic Corrosion Testing of Automotive Painted Steel (Withdrawn 2010)
AASHTO M 181 : 2010 : R2015 SPECIFICATION FOR CHAIN-LINK FENCE
MIL-PRF-24596 Revision B:2009 COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT
ANSI C57.12.28 : 2014 PAD-MOUNTED EQUIPMENT - ENCLOSURE INTEGRITY
MIL-R-53086 Base Document:1988 RUST CONVERTER, METRIC
ASTM D 4712 : 1987 : REV A : R2001 Standard Guide for Testing Industrial Water-Reducible Coatings
ASTM F 1428 : 1992 : R2005 Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
CSA G401 : 2014 CORRUGATED STEEL PIPE PRODUCTS
ASTM E 842 : 1982 Specification for Lawn Buildings (Withdrawn 1990)
SAE J 2551/3 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT
ASTM D 870 : 2015 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
ANSI/EIMA 99A : 2001 EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS)
AASHTO M 181 :2010 SPECIFICATION FOR CHAIN-LINK FENCE
MIL-PRF-81904 Revision C:2011 COATING COMPOUND, THERMAL-INSULATION
SAE J 2551/1 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION
TT-P-2760 Revision A:1994 PRIMER COATING; POLYURETHANE, ELASTOMERIC
MIL-P-28577 Revision B:1988 PRIMER, WATER REDUCIBLE, CORROSION RESISTANT, FOR METAL SURFACES
ASTM D 1735 : 2014 : REDLINE Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
TT-P-001984 Base Document:1975 PRIMER COATING, LATEX BASE, EXTERIOR, UNDERCOAT FOR WOOD, WHITE AND TINTS
ASTM F 1428 : 1992 : R1999 Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
SAE J 2334 : 2016 LABORATORY CYCLIC CORROSION TEST
SAE AMS 3144 : 2012 PRIMER, ANODIC ELECTRODEPOSITION FOR AIRCRAFT APPLICATIONS
MIL-STD-1568 Revision D:2015 Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems
ASTM D 6577 : 2015 : REDLINE Standard Guide for Testing Industrial Protective Coatings
ASTM D 4712 : 1987 : REV A : R2005 Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014)

ASTM D 870 : 2015 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
ASTM D 823 : 1995 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
ASTM D 609 : 2017 : REDLINE Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
ASTM D 4541 : 2017 : REDLINE Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D 610 : 2008 Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
ASTM D 1735 : 2014 : REDLINE Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 3359 : 2017 : REDLINE Standard Test Methods for Rating Adhesion by Tape Test

View more information
£62.61
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.