ASTM D 2646 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
02-03-2024
English
22-01-2018
This guide covers the procedures listed as follows for testing woven, knitted and nonwoven backing fabrics designed for use in the manufacture of pile yarn floor coverings.
1.1This guide covers the procedures listed as follows for testing woven, knitted and nonwoven backing fabrics designed for use in the manufacture of pile yarn floor coverings. The procedures appear in the following order:
| Section | |
|
| |
| Bow and Skewness of Woven Fabrics | 8 |
| Breaking Force of Woven and Nonwoven Fabrics | 15 |
| Breaking Force After Tufting of Woven and Nonwoven Fabrics | 16 |
| Extractable Matter | 9 |
| Fabric Count of Woven Fabrics | 12 |
| Fabric Count of Knitted Fabrics | 13 |
| Length of Woven Fabrics | 11 |
| Mass per Unit Area (Weight) of Woven Fabrics | 14 |
| Width of Woven Fabrics | 10 |
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
D 13
|
| DocumentType |
Guide
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 7983 : 2017 | Standard Test Method for Shrinkage of Carpet Backing Fabrics |
| ASTM D 6719 : 2012 | Standard Guide for Standard Test Methods and Practices for Evaluating Pile Yarn Floor Covering (Withdrawn 2021) |
| ASTM D 6719 : 2022 : EDT 1 | Standard Guide for Standard Test Methods and Practices for Evaluating Pile Yarn Floor Covering |
| ASTM D 7983 : 2017 : R2022 | Standard Test Method for Shrinkage of Carpet Backing Fabrics |
| ASTM D 2257 : 1998 | Standard Test Method for Extractable Matter in Textiles |
| ASTM D 3774 : 1996 : R2012 | Standard Test Method for Width of Textile Fabric |
| ASTM D 5034 : 2009 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 2257 : 1998 : R2004 | Standard Test Method for Extractable Matter in Textiles |
| ASTM D 3774 : 1996 : R2004 | Standard Test Methods for Width of Textile Fabric |
| ASTM D 5684 : 2006 | Standard Terminology Relating to Pile Floor Coverings |
| ASTM D 1776 : 1998 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 5684 : 2012 | Standard Terminology Relating to Pile Floor Coverings |
| ASTM D 3776 : 2007 | Standard Test Methods for Mass Per Unit Area (Weight) of Fabric |
| ASTM D 3882 : 2008 : R2016 | Standard Test Method for Bow and Skew in Woven and Knitted Fabrics |
| ASTM D 3882 : 2008 : R2012 : EDT 1 | Standard Test Method for Bow and Skew in Woven and Knitted Fabrics |
| ASTM D 1776 : 1967 : EDT 1 | Standard Method Of Conditioning Textiles And Textile Products For Testing |
| ASTM D 5684 : 2019 : REV A | Standard Terminology Relating to Pile Floor Coverings |
| ASTM D 5684 : 2008 : REV A | Standard Terminology Relating to Pile Floor Coverings |
| ASTM D 5684 : 2002 | Standard Terminology Relating to Pile Floor Coverings |
| ASTM D 3776 : 1996 | Standard Test Methods for Mass Per Unit Area (Weight) of Fabric |
| ASTM D 3774 : 1996 : R2008 : EDT 2 | Standard Test Method for Width of Textile Fabric |
| ASTM D 5034 : 2009 : R2013 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 3773 : 2007 | Standard Test Methods for Length of Woven Fabric |
| ASTM D 5034 : 1995 : R2001 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 3775 : 2017 | Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics |
| ASTM D 5684 : 2019 | Standard Terminology Relating to Pile Floor Coverings |
| ASTM D 123 : 2019 | Standard Terminology Relating to Textiles |
| ASTM D 3774 : 1996 : R2008 : EDT 1 | Standard Test Methods for Width of Textile Fabric |
| ASTM D 3775 : 1998 | Standard Test Method for Fabric Count of Woven Fabric |
| ASTM D 3776 : 2009 | Standard Test Methods for Mass Per Unit Area (Weight) of Fabric |
| ASTM D 3882 : 2008 : R2016 : EDT 1 | Standard Test Method for Bow and Skew in Woven and Knitted Fabrics |
| ASTM D 1776 : 2004 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 5684 : 2000 | Standard Terminology Relating to Pile Floor Coverings |
| ASTM D 1776 : 2008 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 3775 : 2002 | Standard Test Method for Fabric Count of Woven Fabric |
| ASTM D 1776 : 2008 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 5684 : 2007 | Standard Terminology Relating to Pile Floor Coverings |
| ASTM D 3775 : 2007 | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics |
| ASTM D 2257 : 2020 | Standard Test Method for Extractable Matter in Textiles |
| ASTM D 3887 : 1996 : R2004 | Standard Specification for Tolerances for Knitted Fabrics |
| ASTM D 3882 : 1999 | Standard Test Method for Bow and Skew in Woven and Knitted Fabrics |
| ASTM D 5684 : 2008 | Standard Terminology Relating to Pile Floor Coverings |
| ASTM D 3774 : 2018 | Standard Test Method for Width of Textile Fabric |
| ASTM D 3773 : 1990 : R2002 | Standard Test Methods for Length of Woven Fabric |
| ASTM D 3882 : 2008 : EDT 1 | Standard Test Method for Bow and Skew in Woven and Knitted Fabrics |
| ASTM D 3775 : 2012 | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics |
| ASTM D 3775 : 2003 : REV A | Standard Test Method for Fabric Count of Woven Fabric |
| ASTM D 5034 : 2008 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 2257 : 1998 : R2012 | Standard Test Method for Extractable Matter in Textiles |
| ASTM D 5684 : 2004 : REV A | Standard Terminology Relating to Pile Floor Coverings |
| ASTM D 3775 : 2007 : REV A | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics |
| ASTM D 3887 : 1996 : R2008 | Standard Specification for Tolerances for Knitted Fabrics (Withdrawn 2017) |
| ASTM D 3775 : 2017 : EDT 1 | Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics |
| ASTM D 5684 : 2004 | Standard Terminology Relating to Pile Floor Coverings |
| ASTM D 5034 : 2009 : R2017 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 5034 : 2021 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 123 : 2023 | Standard Terminology Relating to Textiles |
| ASTM D 3774 : 1996 | Standard Test Methods for Width of Textile Fabric |
| ASTM D 3775 : 2017 : R2023 | Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics |
| ASTM D 3775 : 2008 | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics |
| ASTM D 3774 : 1996 : R2016 | Standard Test Method for Width of Textile Fabric |
| ASTM D 5684 : 2010 | Standard Terminology Relating to Pile Floor Coverings |
| ASTM D 123 : 2001 | Standard Terminology Relating to Textiles |
| ASTM D 5034 : 1995 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 3882 : 2008 | Standard Test Method for Bow and Skew in Woven and Knitted Fabrics |
| ASTM D 3773 : 1990 : R1996 : EDT 1 | Standard Test Methods for Length of Woven Fabric |
| ASTM D 3775 : 2003 | Standard Test Method for Fabric Count of Woven Fabric |
| ASTM D 3887 : 1996 | Standard Specification for Tolerances for Knitted Fabrics |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.