• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 3350 : 2010 : REV A

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
Available format(s)

Hardcopy , PDF

Superseded date

11-11-2014

Language(s)

English

Published date

15-11-2010

1.1 This specification covers the identification of polyethylene plastic pipe and fittings materials in accordance with a cell classification system. It is not the function of this specification to provide specific engineering data for design purposes, to specify manufacturing tolerances, or to determine suitability for use for a specific application.

1.2 Polyethylene plastic materials, being thermoplastic, are reprocessable and recyclable (Note 2). This specification allows for the use of those polyethylene materials, provided that all specific requirements of this specification are met.

Note 1—The notes in this specification are for information only and shall not be considered part of this specification.

Note 2—See Guide D5033 for information and definitions related to recycled plastics.

1.3 The values stated in SI units are to be regarded as standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Note 3—There is no known ISO equivalent to this standard.

1.5 For information regarding molding and extrusion materials see Specification D4976. For information regarding wire and cable materials see Specification D1248.

Committee
D 20
DocumentType
Standard
Pages
7
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM F 2807 : 2013 : R2018 Standard Specification for Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure Piping Applications
ASTM D 2239 : 2012 : REV A Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
ASTM F 1281 : 2017 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
ASTM F 714 : 2013 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
ASTM F 3346 : 2019 Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PERT/AL/PE-RT) Composite Pressure Pipe
ASTM F 2619/F2619M : 2013 Standard Specification for High-Density Polyethylene (PE) Line Pipe
ASTM F 2435 : 2015 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
ASTM E 3101 : 2018 Standard Practice for Microwave Examination of Polyethylene Butt Fusion Joints
ASTM F 1055 : 2016 : REV A Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
ASTM F 2737 : 2011 : R2017 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
ASTM F 1412 : 2016 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
ASTM F 1987 : 2001 : R2011 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems (Withdrawn 2020)
ASTM F 2986 : 2012 : R2017 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications
ASTM F 2686 : 2014 Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe (Withdrawn 2023)
ASTM F 2763 : 2016 Standard Specification for 12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F 810 : 2012 : R2018 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
ASTM D 2683 : 2014 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
ASTM F 412 : 2019 Standard Terminology Relating to Plastic Piping Systems
ASTM D 4883 : 2018 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM D 3485 : 2015 Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)
ASTM F 2021 : 2017 Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems
ASTM D 2737 : 2012 : REV A Standard Specification for Polyethylene (PE) Plastic Tubing
ASTM D 1248 : 2016 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
ASTM F 2769 : 2018 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
ASTM F 894 : 2019 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
ASTM D 1693 : 2015 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
ASTM F 1901 : 2016 Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
ASTM E 1858 : 2008 : R2015 : EDT 1 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
ASTM F 1545 : 2015 : REV A Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
ASTM F 3371 : 2019 Standard Specification for Polyolefin Pipe and Fittings for Drainage, Waste, and Vent Applications
ASTM F 2947/F2947M : 2019 Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F 2805 : 2016 Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections
ASTM E 3167/E3167M : 2018 Standard Practice for Conventional Pulse-Echo Ultrasonic Testing of Polyethylene Electrofusion Joints
ASTM D 4703 : 2016 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
ASTM F 2818 : 2010 : R2014 : EDT 1 Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
ASTM F 2880 : 2014 Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes <fraction><num>3/4</den></fraction > in. to 65 in.
ASTM F 1606 : 2005 : R2014 Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner
ASTM D 4000 : 2016 Standard Classification System for Specifying Plastic Materials
ASTM F 3034 : 2015 Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)
ASTM D 3261 : 2016 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
ASTM F 2623 : 2019 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
ASTM E 2046 : 2014 Standard Test Method for Reaction Induction Time by Thermal Analysis
ASTM F 1282 : 2017 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM D 7436 : 2017 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
ASTM F 2306/F2306M : 2019 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
ASTM D 3035 : 2015 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D 7001 : 2006 : R2011 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
ASTM E 2009 : 2008 : R2014 : EDT 1 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
ASTM F 1759 : 1997 : R2018 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
ASTM F 2562/F2562M : 2015 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
ASTM F 3123 : 2018 : REV A Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)
ASTM F 2160 : 2016 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
ASTM E 3170/E3170M : 2018 Standard Practice for Phased Array Ultrasonic Testing of Polyethylene Electrofusion Joints
ASTM F 1734 : 2019 Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
ASTM E 3102 : 2018 Standard Practice for Microwave Examination of Polyethylene Electrofusion Joints Used in Piping Application
ASTM F 2648/F2648M : 2017 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
ASTM F 1986 : 2001 : R2011 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems (Withdrawn 2020)
ASTM F 2922 : 2013 : R2018 Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
ASTM D 4976 : 2012 : REV A Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM F 667/F667M : 2016 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings

View more information
£62.61
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.