ASTM D 3359 : 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Test Methods for Rating Adhesion by Tape Test
Available format(s)
Hardcopy , PDF
Superseded date
23-08-2022
Language(s)
English
Published date
24-03-2017
1.1 These test methods cover procedures for assessing the adhesion of relatively ductile coating films to metallic substrates by applying and removing pressure-sensitive tape over cuts made in the film.
1.1These test methods cover procedures for assessing the adhesion of relatively ductile coating films to metallic substrates by applying and removing pressure-sensitive tape over cuts made in the film.
1.2Test Method A is primarily intended for use in the field while Test Method B is more suitable for use in laboratory or shop environments. Also, Test Method B is not considered suitable for films thicker than 125μm (5 mils) unless wider spaced cuts are employed and there is an explicit agreement between the purchaser and seller.
1.3These test methods are used to evaluate whether the adhesion of a coating to a substrate is adequate for the user’s application. They do not distinguish between higher levels of adhesion for which more sophisticated methods of measurement are required.
1.4This test method is similar in content (but not technically equivalent) to ISO 2409.
1.5In multicoat systems adhesion failure may occur between coats so that the adhesion of the coating system to the substrate is not determined.
1.6The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.7This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
D 01
|
| DocumentType |
Test Method
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM F 3084 : 2022 | Standard Consumer Safety Specification for Infant and Infant/Toddler Rockers |
| ASTM F 2167 : 2022 | Standard Consumer Safety Specification for Infant Bouncer Seats |
| ASTM F 2088 : 2022 | Standard Consumer Safety Specification for Infant and Cradle Swings |
| ASTM B 449 : 1993 : R2015 | Standard Specification for Chromates on Aluminum |
| ASTM F 2194 : 2016 : EDT 1 | Standard Consumer Safety Specification for Bassinets and Cradles |
| ASTM F 2549 : 2014 : REV A | Standard Consumer Safety Specification for Frame Child Carriers |
| ASTM F 3343 : 2019 | Standard Consumer Safety Specification for Infant Bathers |
| ASTM F 2372 : 2015 | Standard Consumer Safety Performance Specification for Shopping Carts |
| ASTM A 755/A755M : 2018 | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
| ASTM F 2264 : 2014 | Standard Consumer Safety Specification for Non-Powered Scooters |
| ASTM F 2957 : 2013 : R2019 : EDT 1 | Standard Specification for Ornamental Aluminum Fence Systems |
| ASTM D 5065 : 2017 | Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces |
| ASTM D 4802 : 2016 | Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet |
| ASTM F 3084 : 2018 | Standard Consumer Safety Specification for Infant and Infant/Toddler Rockers |
| ASTM F 1004 : 2019 | Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures |
| ASTM E 1796 : 2003 : R2016 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM C 1530/C1530M : 2004 : R2019 | Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses |
| ASTM D 5163 : 2016 | Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants |
| ASTM F 1169 : 2019 | Standard Consumer Safety Specification for Full-Size Baby Cribs |
| ASTM D 3322 : 1982 : R2017 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| ASTM F 3118 : 2017 : REV A | Standard Consumer Safety Specification for Infant Inclined Sleep Products (Withdrawn 2022) |
| ASTM D 2247 : 2015 | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
| ASTM E 1795 : 2017 | Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 5498 : 2012 : REV A : R2018 | Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities |
| ASTM F 2050 : 2016 | Standard Consumer Safety Specification for Hand-Held Infant Carriers |
| ASTM D 7733 : 2012 : R2016 | Standard Specification for Acrylic Dispersion Ground |
| ASTM F 3317 : 2018 : REV A | Standard Consumer Safety Specification for Infant Floor Seats |
| ASTM F 2085 : 2012 : R2019 | Standard Consumer Safety Specification for Portable Bed Rails |
| ASTM F 146 : 2012 : R2019 : EDT 1 | Standard Test Methods for Fluid Resistance of Gasket Materials |
| ASTM D 6677 : 2018 | Standard Test Method for Evaluating Adhesion by Knife |
| ASTM F 3019/F3019M : 2014 | Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners |
| ASTM F 1235 : 2018 | Standard Consumer Safety Specification for Portable Hook-On Chairs |
| ASTM F 1842 : 2015 | Standard Test Method for Determining Ink or Coating Adhesion on Flexible Substrates for a Membrane Switch or Printed Electronic Device (Withdrawn 2024) |
| ASTM F 833 : 2019 | Standard Consumer Safety Performance Specification for Carriages and Strollers |
| ASTM F 2167 : 2019 | Standard Consumer Safety Specification for Infant Bouncer Seats |
| ASTM F 1043 : 2018 | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
| ASTM D 7270 : 2007 : R2013 | Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings |
| ASTM D 5324 : 2016 | Standard Guide for Testing Water-Borne Architectural Coatings |
| ASTM D 7826 : 2019 | Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives |
| ASTM F 977 : 2018 | Standard Consumer Safety Specification for Infant Walkers |
| ASTM F 404 : 2018 : REV A | Standard Consumer Safety Specification for High Chairs |
| ASTM F 1967 : 2019 | Standard Consumer Safety Specification for Infant Bath Seats |
| ASTM D 1735 : 2014 | Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
| ASTM F 2670 : 2018 | Standard Consumer Safety Specification for Infant Bath Tubs |
| ASTM D 6486 : 2001 : R2017 | Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings |
| ASTM D 4054 : 2019 | Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives |
| ASTM D 6577 : 2015 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM B 904 : 2000 : R2014 | Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding |
| ASTM B 999 : 2015 | Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate |
| ASTM D 6763 : 2016 | Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
| ASTM F 1178 : 2011 : R2015 | Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture |
| ASTM F 2236 : 2016 : REV A | Standard Consumer Safety Specification for Soft Infant and Toddler Carriers |
| ASTM D 6943 : 2015 | Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings |
| ASTM D 3451 : 2006 : R2017 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM F 3208 : 2018 | Standard Guide for Selecting Test Soils for Validation of Cleaning Methods for Reusable Medical Devices |
| ASTM F 406 : 2019 | Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards |
| ASTM D 6237 : 2009 : R2015 | Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) |
| ASTM E 1797 : 2012 : R2017 : EDT 1 | Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM F 2388 : 2018 | Standard Consumer Safety Specification for Baby Changing Products for Domestic Use |
| ASTM F 1164 : 1997 : R2014 | Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress |
| ASTM F 2285 : 2004 : R2016 : EDT 1 | Standard Consumer Safety Performance Specification for Diaper Changing Tables for Commercial Use |
| ASTM F 2933 : 2019 | Standard Consumer Safety Specification for Crib Mattresses |
| ASTM F 2589 : 2016 | Standard Specification for Ornamental Fences Employing Steel Tubular Pickets |
| ASTM F 3186 : 2017 | Standard Specification for Adult Portable Bed Rails and Related Products |
| ASTM D 870 : 2015 | Standard Practice for Testing Water Resistance of Coatings Using Water Immersion |
| ASTM D 4587 : 2011 | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM F 2641 : 2008 : R2015 | Standard Consumer Safety Specification for Recreational Powered Scooters and Pocket Bikes |
| ASTM D 3732 : 1982 : R2017 | Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings |
| ASTM F 2088 : 2015 | Standard Consumer Safety Specification for Infant Swings |
| ASTM B 905 : 2000 : R2016 | Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test |
| ASTM F 2012 : 2018 : EDT 1 | Standard Consumer Safety Performance Specification for Stationary Activity Centers |
| ASTM D 2248 : 2001 : REV A : R2018 | Standard Practice for Detergent Resistance of Organic Finishes |
| ASTM D 3276 : 2015 : EDT 1 | Standard Guide for Painting Inspectors (Metal Substrates) |
| ASTM D 6695 : 2016 | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM F 1427 : 2013 | Standard Consumer Safety Specification for Bunk Beds |
| ASTM F 3182 : 2016 | Standard Practice for the Application of Spray-Applied Polymeric Liners Inside Pipelines for Potable Water |
| ASTM F 2408 : 2016 | Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets |
| ASTM B 921 : 2008 : R2018 | Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys |
| ASTM F 2833 : 2011 : R2017 | Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type |
| ASTM D 4585/D4585M : 2018 | Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation |
| ASTM F 2951 : 2019 | Standard Consumer Safety Specification for Baby Monitors |
| ASTM F 2085 : 2019 | Standard Consumer Safety Specification for Portable Bed Rails |
| ASTM F 1821 : 2019 : EDT 1 | Standard Consumer Safety Specification for Toddler Beds |
| ASTM D 6237 : 2019 | Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) |
| ASTM F 2907 : 2019 | Standard Consumer Safety Specification for Sling Carriers |
| ASTM F 2549 : 2022 | Standard Consumer Safety Specification for Frame Child Carriers |
| ASTM D 7733 : 2012 : R2021 | Standard Specification for Acrylic Dispersion Ground |
| ASTM D 6944 : 2015 : R2020 | Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling |
| ASTM D 4587 : 2011 : R2019 : EDT 1 | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM F 3019/F3019M : 2019 | Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners |
| ASTM F 1178 : 2011 : R2022 | Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture |
| ASTM F 2589 : 2016 : R2021 | Standard Specification for Ornamental Fences Employing Steel Tubular Pickets |
| ASTM D 3794 : 2022 | Standard Guide for Testing Coil Coatings |
| ASTM D 6943 : 2015(R2019) | Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings |
| ASTM D 1735 : 2021 | Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
| ASTM F 1004 : 2022 | Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures |
| ASTM D 7826 : 2021 | Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives |
| ASTM B 905 : 2000 : R2021 | Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test |
| ASTM F 2264 : 2014 : R2019 | Standard Consumer Safety Specification for Non-Powered Scooters |
| ASTM D 5064 : 2016 : REV A : R2021 | Standard Practice for Conducting a Patch Test to Assess Coating Compatibility |
| ASTM F 1136/F1136M : 2011 : R2019 | Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners |
| ASTM E 1795 : 2020 : REV A | Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 5367 : 2016 : R2021 | Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted |
| ASTM F 977 : 2022 | Standard Consumer Safety Specification for Infant Walkers |
| ASTM F 2372 : 2015 : R2021 | Standard Consumer Safety Performance Specification for Shopping Carts |
| ASTM F 2057 : 2019 | Standard Safety Specification for Clothing Storage Units |
| ASTM D 2247 : 2015(R2020) | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
| ASTM D 7270 : 2007 : R2021 | Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings |
| ASTM F 3317 : 2020 | Standard Consumer Safety Specification for Infant Floor Seats |
| ASTM D 2454 : 2018 | Standard Practice for Determining the Effect of Overbaking on Organic Coatings |
| ASTM F 3343 : 2020 | Standard Consumer Safety Specification for Infant Bathers |
| ASTM A 1113/A1113M : 2020 : EDT 1 | Standard Specification for Corrugated Steel Structural Plate, Polymer-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches |
| ASTM F 833 : 2021 | Standard Consumer Safety Performance Specification for Carriages and Strollers |
| ASTM F 3208 : 2020 | Standard Guide for Selecting Test Soils for Validation of Cleaning Methods for Reusable Medical Devices |
| ASTM D 7893 : 2013 : R2018 | Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products |
| ASTM F 3176 : 2020 | Standard Specification for Special Needs Shopping Carts |
| ASTM B 904 : 2000 : R2021 | Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding |
| ASTM D 4054 : 2022 | Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives |
| ASTM D 5065 : 2017 : R2021 | Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces |
| ASTM F 1164 : 2019 | Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress |
| ASTM F 2670 : 2022 | Standard Consumer Safety Specification for Infant Bath Tubs |
| ASTM D 5163 : 2016 : R2021 | Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants |
| ASTM F 1427 : 2021 : EDT 1 | Standard Consumer Safety Specification for Bunk Beds |
| ASTM B 999 : 2015 : R2022 | Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate |
| ASTM F 404 : 2021 | Standard Consumer Safety Specification for High Chairs |
| ASTM D 1014 : 2018 | Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates |
| ASTM D 7254 : 2021 | Standard Specification for Polypropylene (PP) Siding |
| ASTM F 1917 : 2020 : EDT 1 | Standard Consumer Safety Performance Specification for Infant Bedding and Related Accessories |
| ASTM D 5146 : 2010 : R2019 | Standard Guide to Testing Solvent-Borne Architectural Coatings |
| ASTM F 1821 : 2019 : EDT 2 | Standard Consumer Safety Specification for Toddler Beds |
| ASTM F 3393 : 2020 : EDT 1 | Zinc-Flake Coating Systems for Fasteners |
| ASTM E 1796 : 2020 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 3276 : 2021 | Standard Guide for Painting Inspectors (Metal Substrates) |
| ASTM F 2388 : 2021 | Standard Consumer Safety Specification for Baby Changing Products for Domestic Use |
| ASTM F 2640 : 2018 | Standard Consumer Safety Specification for Booster Seats |
| ASTM F 2050 : 2019 | Standard Consumer Safety Specification for Hand-Held Infant Carriers |
| ASTM F 2933 : 2021 : REV A | Standard Consumer Safety Specification for Crib Mattresses |
| ASTM F 2194 : 2022 : EDT 1 | Standard Consumer Safety Specification for Bassinets and Cradles |
| ASTM D 7167 : 2012 : R2018 | Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant |
| ASTM D 870 : 2015(R2020) | Standard Practice for Testing Water Resistance of Coatings Using Water Immersion |
| ASTM F 3458 : 2021 | Standard Specification for Marketing, Packaging, and Labeling Adult Magnet Sets Containing Small, Loose, Powerful Magnets (with a Flux Index ≥50 kG<sup >2</sup> mm<sup>2</sup>) |
| ASTM D 6577 : 2015 : R2019 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM F 2831 : 2019 | Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems |
| ASTM F 2907 : 2022 | Standard Consumer Safety Specification for Sling Carriers |
| ASTM D 3794 : 2018 | Standard Guide for Testing Coil Coatings |
| ASTM F 1428 : 1992 : R2017 | Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners |
| ASTM D 6944 : 2015 | Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling |
| ASTM D 1730 : 2009 : R2014 | Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting |
| ASTM D 3924 : 2016 | Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials |
| ASTM D 1730 : 2003 | Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting |
| ASTM D 2370 : 2016 | Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM D 3330/D3330M : 2002 : EDT 1 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape |
| ASTM D 1000 : 2017 | Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
| ASTM D 2370 : 1998 | Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM D 609 : 2017 : R2022 | Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products |
| ASTM D 1730 : 2009 | Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting |
| ASTM D 4060 : 2007 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 1730 : 1967 : R1998 | Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting |
| ASTM D 2370 : 1998 : R2002 : EDT 1 | Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM D 3924 : 1980 : R2011 | Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials |
| ASTM D2092 : 1995 | Standard Guide for Preparation of Zinc-Coated (Galvanized) Steel Surfaces for Painting |
| ASTM D 4060 : 2001 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 1000 : 2004 : EDT 1 | Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
| ASTM D 1000 : 2010 | Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
| ASTM D 3924 : 1980 : R2005 | Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials |
| ASTM D 2370 : 1998 : R2010 | Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM D 1730 : 2009 : R2020 | Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting |
| ASTM D 1000 : 2009 | Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
| ASTM D 823 : 2018 | Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels |
| ASTM D 2370 : 1998 : R2002 | Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM D 4060 : 1995 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 3924 : 1980 : R1996 | Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials |
| ASTM D 609 : 2017 | Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products |
| ASTM D 1000 : 1999 | Standard Test Method for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
| ASTM D 1000 : 2004 | Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
| ASTM D 823 : 2018 : R2022 | Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels |
| ASTM D 4060 : 2014 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 4060 : 2010 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 2370 : 2016 : R2021 | Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM D 4060 : 2019 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 3924 : 2016 : R2019 | Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials |
£62.61
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.