Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

17-09-2021

Publisher

American Society for Testing and Materials

1.1This test method covers determination of transition temperatures and enthalpies of fusion and crystallization of polymers by differential scanning calorimetry.

Note 1:True heats of fusion are to be determined in conjunction with structure investigation, and frequently, specialized crystallization techniques are needed.

1.2This test method is applicable to polymers in granular form or to any fabricated shape from which it is possible to cut appropriate specimens.

1.3The normal operating temperature range is from the cryogenic region to 600°C. Certain equipment allows the temperature range to be extended.

1.4The values stated in SI units are the standard.

Note 2:This test method does not apply to all types of polymers as written (see 6.8).

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

Note 3:This standard is similar but not equivalent to ISO 11357-1, -2, -3. The ISO procedures provide additional information not supplied by this test method.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 20
DocumentType	Test Method
Pages	8
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 3418 : 2015 ASTM D 3418 : 2015

ASTM D 5028 : 2017	Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D 5747/D5747M : 2021	Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
ASTM F 2313 : 2018	Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide
ASTM F 2625 : 2010 : R2016	Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
ASTM D 7472 : 2019	Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials
ASTM D 7611/D7611M : 2020	Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
ASTM D 6604 : 2000 : R2017	Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry
ASTM F 624 : 2009 : R2015 : EDT 1	Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications
ASTM F 2945 : 2018	Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
ASTM D 5592 : 1994 : R2018	Standard Guide for Material Properties Needed in Engineering Design Using Plastics
ASTM D 8366 : 2021	Standard Specification for Extruded and Compression Molded Shapes Made from Unfilled Poly(Vinylidene Fluoride) PVDF
ASTM E 2069 : 2019	Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM D 3159 : 2020	Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials
ASTM F 3510 : 2021	Standard Guide for Characterizing Fiber-Based Constructs for Tissue-Engineered Medical Products
ASTM F 561 : 2019	Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
ASTM D 7292 : 2018	Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)
ASTM D 6434 : 2012 : R2018	Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes
ASTM D 5336 : 2015 : REV A	Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Material
ASTM D 4419 : 1990 : R2021	Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D 4591 : 2017	Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM F 942 : 2018	Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
ASTM D 4762 : 2018	Standard Guide for Testing Polymer Matrix Composite Materials
ASTM D 4066 : 2013 : R2019	Standard Classification System for Nylon Injection and Extrusion Materials (PA)
ASTM D 6835 : 2017	Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
ASTM D 7471 : 2019	Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials
ASTM D 4101 : 2017 : EDT 1	Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials
ASTM F 2026 : 2017	Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
ASTM D 1675 : 2018	Standard Test Methods for Polytetrafluoroethylene Tubing
ASTM D 1430 : 2017	Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics
ASTM F 2902 : 2016 : EDT 1	Standard Guide for Assessment of Absorbable Polymeric Implants
ASTM D 4067 : 2016	Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
ASTM F 1925 : 2017	Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants
ASTM D 5138 : 2016	Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
ASTM D 2671 : 2021	Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
ASTM F 2150 : 2019	Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Regenerative Medicine and Tissue-Engineered Medical Products
ASTM D 3222 : 2021	Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
ASTM D 8033 : 2016	Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials
ASTM D 5990 : 2020 : REV A	Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK)
ASTM D 5575 : 2018	Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
ASTM D 4000 : 2020	Standard Classification System for Specifying Plastic Materials
ASTM F 2820 : 2012 : R2021 : EDT 1	Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
ASTM D 5577 : 2019	Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics

ASTM E 1142 : 2022	Standard Terminology Relating to Thermophysical Properties
ASTM E 473 : 2022 : REV D	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 473 : 2022	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 473 : 2021	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 1142 : 2022 : REV A	Standard Terminology Relating to Thermophysical Properties
ASTM E 1142 : 2022 : REV C	Standard Terminology Relating to Thermophysical Properties
ASTM E 473 : 2022 : REV B	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 691 : 2020	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 968 : 2002 : R2014	Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters (Withdrawn 2023)
ASTM E 1142 : 2021 : REV A	Standard Terminology Relating to Thermophysical Properties
ASTM E 473 : 2023 : REV A	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 473 : 2022 : REV C	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 691 : 2023	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2022	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2021	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 1142 : 2022 : REV B	Standard Terminology Relating to Thermophysical Properties
ASTM E 1142 : 2023	Standard Terminology Relating to Thermophysical Properties
ASTM E 473 : 2021 : REV A	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 473 : 2023 : REV B	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 473 : 2022 : REV A	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 473 : 2023	Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E 1142 : 2023 : REV B	Standard Terminology Relating to Thermophysical Properties
ASTM E 1142 : 2021	Standard Terminology Relating to Thermophysical Properties
ASTM E 1142 : 2023 : REV A	Standard Terminology Relating to Thermophysical Properties