ASTM D 3686 : 2013 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
05-08-2020
English
01-04-2013
CONTAINED IN VOL. 11.03, 2017 Defines a method for the sampling of atmospheres to determine the presence of certain organic vapors by means of adsorption on activated charcoal using a charcoal tube and a small portable sampling pump worn by a worker.
1.1This practice covers a method for the sampling of atmospheres to determine the presence of certain organic vapors by means of adsorption on activated charcoal using a charcoal tube and a small portable sampling pump worn by a worker. A list of some of the organic chemical vapors that can be sampled by this practice is provided in Annex A1. This list is presented as an information guide and should not be considered as absolute or complete.
1.2This practice does not cover any method of sampling that requires special impregnation of activated charcoal or other adsorption media.
1.3The values stated in SI units are to be regarded as the standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. A specific safety precaution is given in 9.4.
| Committee |
D 22
|
| DocumentType |
Redline
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
| DIN ISO 16000-6:2012-11 | Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA? sorbent, thermal desorption and gas chromatography using MS or MS-FID (ISO 16000-6:2011) |
| ASTM D 4766 : 1998 : R2003 | Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method) |
| ASTM E 1747 :1995 | Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications |
| ASTM E 1747 : 1995 : R2000 | Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 5578 : 2004 : R2010 | Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method) |
| ASTM D 1356 : 2017 : REDLINE | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 5836 : 2008 : R2013 | Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method) |
| ASTM E 1747 : 1995 : R2011 | Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications |
| ASTM D 5578 : 2004 : R2015 | Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method) (Withdrawn 2024) |
| ASTM D 4597 : 2010 : R2015 | Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers |
| ASTM D 4844 : 2016 : REDLINE | Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection |
| DIN ISO 16000-6 E : 2012 | INDOOR AIR - PART 6: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS IN INDOOR AND TEST CHAMBER AIR BY ACTIVE SAMPLING ON TENAX TA[R] SORBENT, THERMAL DESORPTION AND GAS CHROMATOGRAPHY USING MS OR MS-FID (ISO 16000-6:2011) |
| PD CEN/TS 13649:2014 | Stationary source emissions. Determination of the mass concentration of individual gaseous organic compounds. Sorptive sampling method followed by solvent extraction or thermal desorption |
| 10/30209057 DC : 0 | BS ISO 16000-6 - INDOOR AIR - PART 6: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS IN INDOOR AND TEST CHAMBER AIR BY ACTIVE SAMPLING ON TENAX TA SORBENT, THERMAL DESORPTION AND GAS CHROMATOGRAPHY USING MS/FID |
| BS ISO 16000-6:2011 | Indoor air Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID |
| ASTM D 4947 : 2005 | Standard Test Method for Chlordane and Heptachlor Residues in Indoor Air (Withdrawn 2011) |
| ASTM E 752 : 1989 | Practice for Safety and Health Requirements Relating to Occupational Exposure to Carbon Disulfide (Withdrawn 1995) |
| ASTM D 4913 : 2000 : R2011 | Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors |
| ASTM D 3687 : 2007 : R2012 | Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method |
| ASTM D 6165 : 1997 : R2008 | Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials |
| ASTM D 4766 : 1998 : R2009 : EDT 1 | Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method) |
| ASTM D 4413 : 1998 : EDT 1 | Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (Charcoal Tube Methodology) |
| ASTM E 1747 : 1995 : R2005 | Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications |
| ASTM D 6165 : 1997 : R2012 | Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials (Withdrawn 2016) |
| ASTM D 4413 : 1998 : R2003 | Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (Charcoal Tube Methodology) |
| ASTM D 4766 : 1998 | Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method) |
| S.R. CEN/TS 13649:2014 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF INDIVIDUAL GASEOUS ORGANIC COMPOUNDS - SORPTIVE SAMPLING METHOD FOLLOWED BY SOLVENT EXTRACTION OR THERMAL DESORPTION |
| ASTM D 5578 : 2004 | Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method) |
| NFPA 1994 : 2018 | PROTECTIVE ENSEMBLES FOR FIRST RESPONDERS TO HAZARDOUS MATERIALS EMERGENCIES AND CBRN TERRORISM INCIDENTS |
| ASTM D 5197 : 2016 : REDLINE | Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology) |
| ASTM D 3687 : 2007 | Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method |
| ASTM D 7339 : 2018 : REDLINE | Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography |
| ASTM D 6803 : 2013 : REDLINE | Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers |
| ASTM D 4913 : 2000 | Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors |
| ASTM D 5116 : 2017 : REDLINE | Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products |
| ASTM D 4766 : 1998 : R2014 | Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method) |
| ASTM D 4597 : 2010 | Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers |
| ASTM D 4413 : 1998 : R2009 : EDT 1 | Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (Charcoal Tube Methodology) (Withdrawn 2014) |
| ASTM D 6165 : 1997 : R2003 | Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials |
| ISO 16000-6:2011 | Indoor air Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID |
| ASTM D 6165 : 1997 | Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials |
| ASTM D 4913 : 2000 : R2016 | Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors (Withdrawn 2023) |
| ASTM D 4913 : 2000 : R2005 : EDT 1 | Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors |
| ASTM D 5836 : 2008 | Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method) |
| CEN/TS 13649:2014 | Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.