Name: ASTM D 4141/D4141M : 2014
Brand: ASTM
Price: 62.61 GBP

ASTM D 4141/D4141M : 2014

Superseded

View Superseded by

Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings

Available format(s)

Hardcopy , PDF

Superseded date

21-01-2022

Language(s)

English

Published date

05-03-2014

Publisher

American Society for Testing and Materials

1.1This practice covers two accelerated outdoor exposure procedures for evaluating the exterior weather resistance of coatings applied to substrates.

1.2The two procedures are as follows:

1.2.1Procedure A—Black Box Exposure.

1.2.2Procedure C—Fresnel Reflector Rack Exposure.

Note 1—Procedure B described a Heated Black Box procedure that is no longer in common use.

1.3This standard does not cover all the procedures that are available to the user for accelerating the outdoor exposure of coatings. Other procedures have been used in order to provide a particular effect; however, the two procedures described here are widely used.

1.4The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee	D 01
DocumentType	Standard Practice
Pages	6
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM D 4141/D4141M : 2022
Supersedes	ASTM D 4141 : 2007

ASTM E 3152 : 2018

Standard Guide for Standard Test Methods and Practices Available for Determining Antifungal Activity on Natural or Synthetic Substrates Treated with Antimicrobial Agents

ASTM D 2244 : 2021	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM G 141 : 2009 : R2021	Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
ASTM G 141 : 2009 : R2013	Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
ASTM D 2244 : 2015	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2244 : 2011	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM G 169 : 2001 : R2013	Standard Guide for Application of Basic Statistical Methods to Weathering Tests
ASTM D 2244 : 2009	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2244 : 2002	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2244 : 2016	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2244 : 2015 : EDT 1	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2244 : 2009 : REV B	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2244 : 2002 : EDT 1	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2244 : 2015 : REV A	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 7091 : 2020	Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 2244 : 2014	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2244 : 2005	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 4214 : 1998	Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films (Withdrawn 2007)
ASTM D 4214 : 2007 : R2015	Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
ASTM D 4214 : 2007	Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
ASTM D 7091 : 2013	Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM G 169 : 2001 : R2021	Standard Guide for Application of Basic Statistical Methods to Weathering Tests
ASTM D 2244 : 2007	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 7091 : 2021	Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 7091 : 2012	Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 7091 : 2005	Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 2244 : 2009 : REV A	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2244 : 1993 : R2000	Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates