• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 4175 : 2022

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
Available format(s)

Hardcopy , PDF

Superseded date

12-11-2022

Language(s)

English

Published date

10-05-2022

1.1This terminology standard covers the compilation of terminology developed by Committee D02 on Petroleum Products, Liquid Fuels, and Lubricants, except that it does not include terms/definitions specific only to the standards in which they appear.

1.1.1The terminology, mostly definitions, is unique to petroleum, petroleum products, lubricants, and certain products from biomass and chemical synthesis. Meanings of the same terms outside of applications to petroleum, petroleum products, and lubricants can be found in other compilations and in dictionaries of general usage.

1.1.2The terms/definitions exist in two places: (1) in the standards in which they appear and (2) in this compilation.

1.2This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 02
DocumentType
Reference Material
Pages
85
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 6021 : 2022 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
ASTM D 7721 : 2017 Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency
ASTM D 7415 : 2021 Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 7755 : 2011 : R2022 Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D 6448 : 2016 : R2022 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
ASTM D 8235 : 2021 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4289 : 2021 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D 8321 : 2022 Standard Practice for Development and Validation of Multivariate Analyses for Use in Predicting Properties of Petroleum Products, Liquid Fuels, and Lubricants based on Spectroscopic Measurements
ASTM D 473 : 2022 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
ASTM D 2782 : 2020 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)
ASTM D 7412 : 2022 Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 5501 : 2020 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20 % Ethanol by Gas Chromatography
ASTM D 2887 : 2022 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 8183 : 2022 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
ASTM C 781 : 2020 Standard Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components
ASTM D 8070 : 2021 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM D 7223 : 2021 Standard Specification for Aviation Certification Turbine Fuel
ASTM D 2276 : 2022 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM D 6224 : 2022 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
ASTM D 1835 : 2022 Standard Specification for Liquefied Petroleum (LP) Gases
ASTM D 8183 : 2018 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
ASTM D 7412 : 2021 Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 7112 : 2019 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D 5291 : 2021 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
ASTM D 4693 : 2007 : R2021 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
ASTM D 6557 : 2018 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
ASTM D 7414 : 2021 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 4057 : 2022 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4378 : 2022 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
ASTM D 7423 : 2017 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
ASTM D 5966 : 2022 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine
ASTM D 7847 : 2022 Standard Guide for Interlaboratory Studies for Microbiological Test Methods
ASTM D 8386 : 2021 Standard Test Method for Determining Enhanced Filter Blocking Tendency (EFBT)
ASTM D 7418 : 2022 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM D 8412 : 2021 Standard Guide for Quantification of Microbial Contamination in Liquid Fuels and Fuel-Associated Water by Quantitative Polymerase Chain Reaction (qPCR)
ASTM D 7463 : 2021 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
ASTM D 6482 : 2021 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D 7795 : 2015 : R2022 : EDT 1 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration
ASTM D 6890 : 2021 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 7624 : 2022 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 8181 : 2019 Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils
ASTM D 8321 : 2021 Standard Practice for Development and Validation of Multivariate Analyses for Use in Predicting Properties of Petroleum Products, Liquid Fuels, and Lubricants based on Spectroscopic Measurements
ASTM D 8226 : 2021 : REV A : EDT 1 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine<rangeref></rangeref >
ASTM D 7415 : 2022 Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 4625 : 2021 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)
ASTM D 6731 : 2022 Standard Test Method for<!--ask about discussion in biodegradation def (keep?)--> Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer
ASTM D 7217 : 2016 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D 4998 : 2013 : R2021 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids
ASTM D 4815 : 2022 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography
ASTM D 2881 : 2019 Standard Classification for Metalworking Fluids and Related Materials
ASTM D 6200 : 2021 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D 8210 : 2022 Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D 187 : 2018 Standard Test Method for Burning Quality of Kerosene
ASTM D 8009 : 2022 Standard Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products
ASTM D 8048 : 2021 : REV A : EDT 1 Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine
ASTM D 2878 : 2021 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
ASTM D 8110 : 2017 Standard Test Method for Elemental Analysis of Distillate Products by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
ASTM D 6595 : 2022 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM D 7579 : 2009 : R2019 Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
ASTM D 7624 : 2021 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 8350 : 2022 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine
ASTM D 8226 : 2021 : REV A Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine<rangeref></rangeref >
ASTM D 2982 : 2007 : R2019 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
ASTM D 7301 : 2021 Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose
ASTM D 2700 : 2022 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 4012 : 2015 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
ASTM D 7059 : 2021 Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
ASTM D 8279 : 2021 Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM D 2268 : 2021 Standard Test Method for Analysis of High-Purity <emph type="ital">n</emph>-Heptane and <emph type="ital">Iso</emph>octane by Capillary Gas Chromatography
ASTM D 6984 : 2018 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
ASTM D 7996 : 2015 Standard Test Method for Measuring Visible Spectrum of Asphaltenes in Heavy Fuel Oils and Crude Oils by Spectroscopy in a Microfluidic Platform (Withdrawn 2024)
ASTM F 2489 : 2006 : R2013 Standard Guide for Instrument and Precision Bearing Lubricants—Part 2 Greases
ASTM D 5598 : 2020 Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
ASTM D 7484 : 2021 : REV B Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
ASTM D 1401 : 2021 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM D 7623 : 2020 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
ASTM D 381 : 2022 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D 7862 : 2021 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 7157 : 2022 : EDT 1 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (<emph type="ital">n</emph >-Heptane Phase Separation; Optical Detection)
ASTM D 5967 : 2021 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 7796 : 2021 Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography
ASTM D 5184 : 2022 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D 7923 : 2019 Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
ASTM D 8356 : 2020 Standard Test Method for Sonic Velocity in Manufactured Carbons and Graphite Materials for use in Obtaining Approximate Elastic Constants: Young’s Modulus, Shear Modulus, and Poisson’s Ratio
ASTM F 2489 : 2006 : R2022 Standard Guide for Instrument and Precision Bearing Lubricants—Part 2 Greases
ASTM D 7863 : 2022 Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids
ASTM D 8184 : 2018 : EDT 1 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM D 7451 : 2021 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark-Ignition Engine Fuels
ASTM D 7320 : 2018 : EDT 1 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
ASTM D 8111 : 2021 : REV A : EDT 1 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine
ASTM D 6448 : 2016 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
ASTM D 8211 : 2021 Standard Test Method for Hot Surface Ignition Temperature of Gases on Flat Surface
ASTM D 6425 : 2019 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
ASTM D 3240 : 2022 : REV A Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D 2622 : 2021 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 6974 : 2020 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
ASTM D 6185 : 2011 : R2017 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases
ASTM D 4176 : 2022 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 5769 : 2022 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
ASTM D 8256 : 2022 : REV A Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 909 : 2021 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline
ASTM D 5441 : 2021 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography
ASTM D 5056 : 2022 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
ASTM D 3605 : 2022 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
ASTM D 5705 : 2020 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
ASTM D 1655 : 2022 Standard Specification for Aviation Turbine Fuels
ASTM D 8048 : 2021 : REV A Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine
ASTM D 4048 : 2019 : REV A Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
ASTM D 7422 : 2022 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
ASTM D 6810 : 2021 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
ASTM D 8166 : 2021 : REV A Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Condition Monitors
ASTM D 4048 : 2022 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
ASTM D 7844 : 2022 : REV A Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 8274 : 2020 : REV A Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer
ASTM D 3700 : 2021 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 8076 : 2021 : REV B Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
ASTM D 7690 : 2011 : R2021 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
ASTM D 6709 : 2022 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
ASTM D 2983 : 2022 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D 4150 : 2021 : REV B Standard Terminology Relating to Gaseous Fuels
ASTM D 8279 : 2022 : REV A Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
ASTM D 6423 : 2020 : REV A Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends
ASTM D 2709 : 2022 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 4929 : 2022 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM D 8377 : 2021 : REV A Standard Guide for High Temperature Strength Measurements of Graphite Impregnated with Molten Salt
ASTM D 7917 : 2014 : R2018 Standard Practice for Inductive Wear Debris Sensors in Gearbox and Drivetrain Applications
ASTM D 8047 : 2019 : EDT 1 Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
ASTM G 40 : 2022 Standard Terminology Relating to Wear and Erosion
ASTM D 6810 : 2022 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
ASTM D 2709 : 2016 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 4627 : 2022 Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids
ASTM D 3603 : 2020 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)
ASTM D 4740 : 2020 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
ASTM D 7920 : 2021 Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography
ASTM D 2711 : 2017 Standard Test Method for Demulsibility Characteristics of Lubricating Oils
ASTM D 4176 : 2021 : REV A Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 613 : 2018 : REV A : EDT 1 Standard Test Method for Cetane Number of Diesel Fuel Oil
ASTM D 8011 : 2019 Standard Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as a Denaturant for Fuel Ethanol
ASTM D 7414 : 2022 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 5600 : 2022 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 7372 : 2021 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
ASTM D 5707 : 2019 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D 6074 : 2015 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
ASTM D 8275 : 2022 Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines
ASTM D 7668 : 2017 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D 1655 : 2021 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 8165 : 2021 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
ASTM D 3606 : 2022 Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography
ASTM D 7501 : 2022 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel Fuel Blendstock (B100) by Cold Soak Filtration Test (CSFT)
ASTM D 5983 : 2021 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Blending With Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 6217 : 2021 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration<rangeref></rangeref >
ASTM D 7328 : 2022 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 8275 : 2021 Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines
ASTM C 886 : 2021 Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
ASTM D 7684 : 2011 : R2020 Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants
ASTM D 4806 : 2021 : REV A Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 6074 : 2015 : R2022 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
ASTM D 5797 : 2021 Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines
ASTM D 6668 : 2021 Standard Test Method for Discrimination Between Flammability Ratings of F = 0 <brk />and F = 1
ASTM D 4177 : 2022 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 7594 : 2019 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D 524 : 2015 : R2019 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
ASTM D 8045 : 2017 : EDT 1 Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration
ASTM D 8289 : 2020 Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite
ASTM D 7219 : 2019 Standard Specification for Isotropic and Near-isotropic Nuclear Graphites
ASTM D 7157 : 2018 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (<emph type="ital">n</emph >-Heptane Phase Separation; Optical Detection)
ASTM D 4056 : 2021 Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
ASTM D 8114 : 2022 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition
ASTM D 7468 : 2022 Standard Test Method for Cummins ISM Test
ASTM D 6923 : 2018 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure
ASTM D 7320 : 2018 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
ASTM D 6160 : 2021 Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography
ASTM D 6984 : 2018 : EDT 1 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
ASTM D 4737 : 2021 Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 5706 : 2016 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D 974 : 2021 Standard Test Method for Acid and Base Number by Color-Indicator Titration
ASTM D 6823 : 2008 : R2021 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils
ASTM D 3699 : 2019 Standard Specification for Kerosine
ASTM D 2983 : 2021 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D 7846 : 2021 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites
ASTM D 6710 : 2021 Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil
ASTM D 2885 : 2021 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D 322 : 1997 : R2016 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation (Withdrawn 2022)
ASTM D 323 : 2020 : REV A Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
ASTM D 7666 : 2012 : R2019 Standard Specification for Triglyceride Burner Fuel
ASTM D 7216 : 2022 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
ASTM D 7546 : 2015 Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor
ASTM D 7156 : 2019 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
ASTM D 8470 : 2022 Standard Practice for Development and Implementation of Instrument Performance Tests for Use on Multivariate Online, At-Line and Laboratory Spectroscopic Based Analyzer Systems
ASTM D 7421 : 2019 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D 4950 : 2019 Standard Classification and Specification for Automotive Service Greases
ASTM D 7898 : 2014 : R2020 Standard Practice for Lubrication and Hydraulic Filter Debris Analysis (FDA) for Condition Monitoring of Machinery
ASTM D 4294 : 2021 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 7468 : 2021 Standard Test Method for Cummins ISM Test
ASTM D 5500 : 2020 : REV A Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
ASTM D 4291 : 2021 Standard Test Method for Trace Ethylene Glycol in Used Engine Oil
ASTM D 6743 : 2020 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
ASTM D 7669 : 2020 Standard Guide for Practical Lubricant Condition Data Trend Analysis
ASTM D 8114 : 2022 : REV A Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition
ASTM D 7418 : 2021 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM D 4054 : 2022 Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives
ASTM D 2699 : 2021 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
ASTM D 5134 : 2021 Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography
ASTM D 7563 : 2010 : R2016 Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel
ASTM D 6681 : 2017 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure
ASTM D 7794 : 2021 Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines
ASTM D 7577 : 2012 : R2021 Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends
ASTM D 5304 : 2020 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
ASTM D 7620 : 2010 : R2020 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
ASTM D 4378 : 2020 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
ASTM D 8396 : 2022 Standard Test Method for Group Types Quantification of Hydrocarbons in Hydrocarbon Liquids with a Boiling Point between 36 °C and 343 °C by Flow Modulated GCxGC – FID
ASTM D 4052 : 2022 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 3237 : 2022 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM G 40 : 2021 : REV A Standard Terminology Relating to Wear and Erosion
ASTM D 7155 : 2020 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
ASTM D 7589 : 2016 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine<rangeref></rangeref >
ASTM D 86 : 2020 : REV B Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 8324 : 2021 Standard Guide for Selection of Environmentally Acceptable Lubricants for the U.S. Environmental Protection Agency (EPA) Vessel General Permit
ASTM D 5482 : 2020 : REV A Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method—Atmospheric)
ASTM D 7589 : 2016 : EDT 1 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine<rangeref></rangeref >
ASTM D 8385 : 2022 Standard Test Method for Dry Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique
ASTM D 2700 : 2022 : REV A Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 1657 : 2022 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D 7261 : 2022 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
ASTM D 3705 : 2014 : R2019 Standard Test Method for Misting Properties of Lubricating Fluids
ASTM D 6593 : 2018 : EDT 1 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 7755 : 2011 : R2017 Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D 8049 : 2021 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
ASTM D 8165 : 2022 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
ASTM D 8111 : 2021 : REV A Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine
ASTM D 7665 : 2022 Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids
ASTM D 2699 : 2022 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
ASTM D 5599 : 2022 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D 189 : 2006 : R2019 Standard Test Method for Conradson Carbon Residue of Petroleum Products
ASTM D 7420 : 2018 Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D 1403 : 2020 : REV B Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
ASTM D 4860 : 2021 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
ASTM D 4953 : 2020 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
ASTM D 976 : 2021 Standard Test Method for Calculated Cetane Index of Distillate Fuels
ASTM D 6584 : 2021 Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
ASTM D 7549 : 2021 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure
ASTM D 8112 : 2017 Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid
ASTM D 4055 : 2004 : R2019 Standard Test Method for Pentane Insolubles by Membrane Filtration
ASTM D 7978 : 2014 : R2019 Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method
ASTM D 7319 : 2022 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
ASTM D 7596 : 2014 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM D 7720 : 2021 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
ASTM D 6081 : 2022 Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
ASTM D 6615 : 2022 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 6299 : 2021 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 1404/D1404M : 1999 : R2019 Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease
ASTM D 8046 : 2021 Standard Guide for Pumpability of Heat Transfer Fluids
ASTM D 4860 : 2022 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
ASTM D 7922 : 2021 Standard Test Method for Determination of Glycol for In-Service Engine Oils by Gas Chromatography
ASTM D 3238 : 2022 Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
ASTM D 3228 : 2022 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
ASTM D 7687 : 2021 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D 7622 : 2020 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM D 217 : 2021 : REV A Standard Test Methods for Cone Penetration of Lubricating Grease
ASTM D 7721 : 2022 Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency
ASTM D 5483 : 2021 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM D 7847 : 2017 Standard Guide for Interlaboratory Studies for Microbiological Test Methods
ASTM D 6560 : 2022 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
ASTM D 7482 : 2017 Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis
ASTM D 4814 : 2021 : REV C Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 8074 : 2022 Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
ASTM D 8098 : 2017 Standard Test Method for Permanent Gases in C<inf>2</inf> and C<inf>3</inf> Hydrocarbon Products by Gas Chromatography and Pulse Discharge Helium Ionization Detector
ASTM D 7043 : 2021 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
ASTM D 7844 : 2021 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 8350 : 2021 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine
ASTM D 7317 : 2007 : R2019 Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
ASTM D 5798 : 2021 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 6618 : 2016 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine
ASTM D 909 : 2022 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline
ASTM D 7619 : 2022 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D 7548 : 2022 Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
ASTM D 8150 : 2022 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
ASTM D 8112 : 2022 Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid
ASTM D 6296 : 2022 Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography
ASTM D 7528 : 2022 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
ASTM D 8148 : 2022 Standard Test Method for Spectroscopic Determination of Haze in Fuels
ASTM D 6468 : 2022 Standard Test Method for High Temperature Stability of Middle Distillate Fuels
ASTM D 3831 : 2022 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
ASTM D 8128 : 2022 Standard Guide for Monitoring Failure Mode Progression in Industrial Applications with Rolling Element Ball Type Bearings
ASTM D 6299 : 2022 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3948 : 2022 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 8166 : 2022 Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Particle Contamination Monitors

View more information
£113.54
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.