Standard Test Method for Indicating Oil or Water in Compressed Air

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

17-01-2024

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 06.02, 2017 Describes the presence of oil or water in compressed air used for abrasive blast cleaning, air blast cleaning, and coating application operations.

1.1This test method is used to determine the presence of oil or water in compressed air used for abrasive blast cleaning, air blast cleaning, and coating application operations.

1.2The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 4.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 01
DocumentType	Test Method
Pages	2
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 4285 : 1983 : R2012

SSPC-SP 5 (WAB) : 2015	WHITE METAL WET ABRASIVE BLAST CLEANING (SSPC-SP 5 (WAB)/NACE WAB-1)
NACE 10 : 2002	FIBERGLASS-REINFORCED PLASTIC (FRP) LININGS APPLIED TO BOTTOMS OF CARBON STEEL ABOVEGROUND STORAGE TANKS
NACE RP 03 02 : 2002	SELECTION AND APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF NEW AND USED RAIL TANK CARS IN MOLTEN SULFUR SERVICE
EN ISO 18797-1:2017	Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016)
SSPC-SP 7 (WAB) : 2015	BRUSH-OFF WET ABRASIVE BLAST CLEANING (SSPC-SP 7 (WAB)/NACE WAB-4)
15/30278562 DC : 0	BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM
AASHTO PP 79 : 2014	PRACTICE FOR HIGH FRICTION SURFACE TREATMENT FOR ASPHALT AND CONCRETE PAVEMENTS
ASTM D 5107 : 2003	Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone
SSPC-SP 10 (WAB) : 2015	NEAR-WHITE METAL WET ABRASIVE BLAST CLEANING (SSPC-SP 10 (WAB)/NACE WAB-2)
NACE 43114 : 2014	NONVISIBLE CONTAMINANTS ON RAILCAR SURFACES
NACE SP 05 92 : 2006	APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF NEW AND USED RAIL TANK CARS IN CONCENTRATED (90 TO 98%) SULFURIC ACID SERVICE
NACE RP 08 92 : 2001	COATINGS AND LININGS OVER CONCRETE FOR CHEMICAL IMMERSION AND CONTAINMENT SERVICE
SSPC-SP 15 : 2012	COMMERCIAL GRADE POWER-TOOL CLEANING
ASTM D 823 : 2018	Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
ASTM C 1147 : 2014	Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
I.S. EN ISO 18797-1:2017	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016)
NACE SP 08 15 : 2015	COMMERCIAL WET ABRASIVE BLAST CLEANING (SSPC-SP 6 (WAB)/NACE WAB-3)
ASTM D 3089 : 1997 : R2008	Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM D 7396 : 2014 : REDLINE	Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
ASTM D 4258 : 2005 : R2017	Standard Practice for Surface Cleaning Concrete for Coating
ASTM D 4259 : 1988 : R2006	Standard Practice for Abrading Concrete
NACE RP 01 76 : 2003	CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION
NACE RP 02 88 : 2004	INSPECTION OF LININGS ON STEEL AND CONCRETE
NACE RP 02 95 : 0	APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF NEW AND USED RAIL TANK CARS
NACE SP 01 91 : 2017	APPLICATION OF INTERNAL PLASTIC COATINGS FOR OILFIELD TUBULAR GOODS AND ACCESSORIES
ASTM D 7602 : 2011 : R2017	Standard Practice for Installation of Vulcanized Rubber Linings
14/30300605 DC : 0	BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
SSPC-SP 11 : 2012	POWER-TOOL CLEANING TO BARE METAL
BS ISO 18797-1 : 2016 COR 2017	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM
NACE RP 03 86 : 2003	APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF COVERED STEEL HOPPER RAIL CARS IN PLASTIC, FOOD, AND CHEMICAL SERVICE
17/30313373 DC : 0	BS ISO 21809-11 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 11: COATING REPAIRS ON REHABILITATION
ASTM D 5107 : 2003 : R2013	Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone
NACE RP 06 92 : 2003	APPLICATION OF A COATING SYSTEM TO EXTERIOR SURFACES OF STEEL RAIL CARS
NACE SP 08 92 : 2007	COATINGS AND LININGS OVER CONCRETE FOR CHEMICAL IMMERSION AND CONTAINMENT SERVICE
NACE 12/AWS C2.23M/SSPC CS- 23 : 2016	SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL
ASTM D 6237 : 2009 : R2015	Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
ASTM D 4259 : 2018	Standard Practice for Preparation of Concrete by Abrasion Prior to Coating Application
ASTM D 5498 : 2012 : REV A : R2018	Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities
ASTM D 6386 : 2016 : REV A	Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
ASTM D 3276 : 2015 : EDT 1	Standard Guide for Painting Inspectors (Metal Substrates)
ASTM D 7055 : 2019	Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings
ASTM D 7396 : 2014	Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
ASTM D 7803 : 2019	Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating
ASTM D 4258 : 2005 : R2012	Standard Practice for Surface Cleaning Concrete for Coating
ASTM D 7803 : 2012	Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating
ASTM D 7602 : 2011	Standard Practice for Installation of Vulcanized Rubber Linings
NACE SP 01 08 : 2008	CORROSION CONTROL OF OFFSHORE STRUCTURES BY PROTECTIVE COATINGS
07/30083514 DC : 0	BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
NACE SP 02 95 : 2008	APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF NEW AND USED RAIL TANK CARS
AASHTO R 31 : 2009 : R2014	PRACTICE FOR EVALUATION OF PROTECTIVE COATING SYSTEMS FOR STRUCTURAL STEEL
NACE SP 02 88:2011	INSPECTION OF LINING APPLICATION IN STEEL AND CONCRETE EQUIPMENT
SSPC-SP 14 (WAB) : 2015	INDUSTRIAL WET ABRASIVE BLAST CLEANING (SSPC-SP 14 (WAB)/NACE WAB-8)
SAE AS 7489 : 2017	STANDARD REQUIREMENTS FOR AEROSPACE ORGANIC COATINGS APPLICATOR CERTIFICATION
NACE 12 : 2003	SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL
BS EN ISO 18797-1:2017	Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM
ISO 18797-1:2016	Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM
ASTM C 811 : 1998 : R2008	Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings (Withdrawn 2012)
ASTM C 1147 : 2014 : REDLINE	Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
ISO 21809-3:2016	Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
NACE 11 : 2003	THIN-FILM ORGANIC LININGS APPLIED IN NEW CARBON STEEL PROCESS VESSELS
NASA STD 5008 : 2011	PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT
ASTM C 811 : 1998 : R2003	Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings
I.S. EN ISO 21809-3:2016	PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016)
16/30278559 DC : 0	BS ISO 18796-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF CARBON STEEL PROCESS VESSELS - PART 1: TECHNICAL REQUIREMENTS
NACE SP 10 15 : 2015	BRUSH-OFF WET ABRASIVE BLAST CLEANING (SSPC-SP 7 (WAB)/NACE WAB-4)
BS EN ISO 16961:2015	Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks
BS EN ISO 21809-3:2016	Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings
SSPC-PA GUIDE 13 : 2006	GUIDE SPECIFICATION FOR APPLICATION OF COATING SYSTEMS WITH ZINC-RICH PRIMERS TO STEEL BRIDGES
NACE RP 05 92 : 0	APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF NEW AND USED RAIL TANK CARS IN CONCENTRATED (90 TO 98%) SULFURIC ACID SERVICE
SSPC-PA 15 : 2013	MATERIAL AND PREPARATION REQUIREMENTS FOR STEEL TEST PANELS USED TO EVALUATE THE PERFORMANCE OF INDUSTRIAL COATINGS
API SPEC 16F : 2017	SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT
NACE SP 03 98 : 2015	RECOMMENDATIONS FOR TRAINING AND QUALIFYING PERSONNEL AS RAIL CAR COATING AND LINING INSPECTORS
NACE SP 06 15 : 2015	NEAR-WHITE METAL WET ABRASIVE BLAST CLEANING (SSPC-SP 10 (WAB)/NACE WAB-2)
ASTM D 4259 : 1988 : R2012	Standard Practice for Abrading Concrete
ASTM D 6237 : 2009	Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
ASTM D 5161 : 2004 : REV A	Standard Guide for Specifying Inspection Requirements for Coating and Lining Work (Metal Substrates) (Withdrawn 2013)
ASTM D 5161 : 2004	Standard Guide for Specifying Inspection Requirements for Coating and Lining Work (Metal Substrates)
SSPC-SP 6 (WAB) : 2015	COMMERCIAL WET ABRASIVE BLAST CLEANING (SSPC-SP 6 (WAB)/NACE WAB-3)
ISO 16961:2015	Petroleum, petrochemical and natural gas industries Internal coating and lining of steel storage tanks
EN ISO 21809-3:2016	Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
EN ISO 16961:2015	Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015)
ASTM D 4259 : 1988 : R1999	Standard Practice for Abrading Concrete
NACE SP 07 15 : 2015	WHITE METAL WET ABRASIVE BLAST CLEANING (SSPC-SP 5 (WAB)/NACE WAB-1)
AWS C2.23M/C2.23 : 2003	SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL
NACE SP 03 02 : 2007	SELECTION AND APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF NEW AND USED RAIL TANK CARS IN MOLTEN SULFUR SERVICE
NACE SP 03 86 : 2007	APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF COVERED STEEL HOPPER RAIL CARS IN PLASTIC, FOOD, AND CHEMICAL SERVICE
ASTM D 5107 : 2003 : R2007	Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone
NACE SP 09 15 : 2015	INDUSTRIAL WET ABRASIVE BLAST CLEANING (SSPC-SP 14 (WAB)/NACE WAB-8)
AWS C2.16 : 1992	GUIDE FOR THERMAL SPRAY OPERATOR QUALIFICATION
UNE-EN ISO 21809-3:2016	Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
I.S. EN ISO 16961:2015	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015)
ASTM C 811 : 1998	Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings
ASTM D 4258 : 2005	Standard Practice for Surface Cleaning Concrete for Coating
ASTM D 3276 : 2021	Standard Guide for Painting Inspectors (Metal Substrates)
ASTM D 4258 : 2023	Standard Practice for Surface Cleaning Concrete for Coating
ASTM D 6386 : 2022	Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
ASTM D 5107 : 2003 : R2022	Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone
ASTM D 7396 : 2014 : R2020	Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
ASTM C 1147 : 2014 : R2022	Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
ASTM C 704/C704M : 2015 : R2022 : EDT 1	Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM D 6237 : 2019	Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
ASTM D 823 : 2018 : R2022	Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels