ASTM D 4329 : 2013 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics
Available format(s)
PDF
Superseded date
13-08-2021
Language(s)
English
Published date
15-07-2013
CONTAINED IN VOL. 08.03, 2014 Defines test conditions that are applicable for fluorescent UV exposure of plastics conducted in accordance with Practices G 151 and G 154.
1.1This practice covers specific procedures and test conditions that are applicable for fluorescent UV exposure of plastics conducted in accordance with Practices G151 and G154. This practice also covers the preparation of test specimens, the test conditions best suited for plastics, and the evaluation of test results.
1.2The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.
| Committee |
D 20
|
| DocumentType |
Redline
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
| ASTM F 1988 : 1999 : R2014 | Standard Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use |
| 05/30106298 DC : DRAFT JAN 2005 | ISO 8980-4 - OPHTHALMIC OPTICS - UNCUT FINISHED SPECTACLE LENSES - PART 4: SPECIFICATIONS AND TEST METHODS FOR ANTIREFLECTIVE COATINGS |
| ASTM F 1858 : 1998 : R2014 | Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use |
| ASTM D 1248 : 2016 : REDLINE | Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM F 2922 : 2013 : R2018 | Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers |
| ASTM F 2922 : 2013 : EDT 1 | Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers |
| ASTM D 6662 : 2017 : REDLINE | Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards |
| ASTM F 2774 : 2009 : R2014 | Standard Practice for Manufacturing Quality Control of Consumer Trampoline Bed Material |
| ASTM D 5870 : 2016 : REDLINE | Standard Practice for Calculating Property Retention Index of Plastics |
| ASTM D 7436 : 2017 : REDLINE | Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology |
| DIN EN ISO 8980-4 E : 2006 | OPHTHALMIC OPTICS - UNCUT FINISHED SPECTACLE LENSES - PART 4: SPECIFICATIONS AND TEST METHODS FOR ANTI-REFLECTIVE COATINGS |
| ASTM F 2922 : 2013 | Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers |
| ASTM F 1988 : 1999 : R2004 : EDT 1 | Standard Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use |
| ASTM F 1975 : 2015 : REDLINE | Standard Specification for Nonpowered Bicycle Trailers Designed for Human Passengers |
| ASTM F 1858 : 1998 : R2008 | Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use |
| ASTM F 1858 : 1998 : R2004 : EDT 1 | Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use |
| ASTM F 1838 : 1998 | Standard Performance Requirements for Child's Plastic Chairs for Outdoor Use |
| ASTM F 1838 : 1998 : R2008 | Standard Performance Requirements for Child's Plastic Chairs for Outdoor Use (Withdrawn 2017) |
| ASTM F 1858 : 1998 | Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use |
| ASTM D 4000 : 2016 : REDLINE | Standard Classification System for Specifying Plastic Materials |
| ASTM G 178 : 2016 : REDLINE | Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique |
| I.S. EN ISO 8980-4:2007 | OPHTHALMIC OPTICS - UNCUT FINISHED SPECTACLE LENSES - PART 4: SPECIFICATIONS AND TEST METHODS FOR ANTI-REFLECTIVE COATINGS |
| SAE J 844 : 2012 | NONMETALLIC AIR BRAKE SYSTEM TUBING |
| ASTM D 4182 : 1997 | Standard Practice for Evaluation of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke |
| ASTM F 1988 : 1999 : R2004 | Standard Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use |
| ASTM D 8139 : 2017 | Standard Specification for Semi-Rigid, Closed-Cell Polypropylene Foam, Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction |
| CSA S806: 2012 | DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS |
| CSA C22.2 No. 126.2:2002 | NONMETALLIC CABLE TRAY SYSTEMS |
| S806-12 (R2017) | Design and construction of building structures with fibre-reinforced polymers |
| CSA C22.2 No. 126.2 : 2002 : INC : UPD 1 : 2005 : R2012 | NONMETALLIC CABLE TRAY SYSTEMS |
| CAN/CSA-C22.2 NO. 126.2-02 (R2017) | Nonmetallic Cable Tray Systems (Bi-National standard, with UL 568) |
| ASTM D 5208 : 2014 : REDLINE | Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics |
| ASTM F 1561 : 2003 | Standard Performance Requirements for Plastic Chairs for Outdoor Use |
| ASTM F 1561 : 2003 : R2008 | Standard Performance Requirements for Plastic Chairs for Outdoor Use |
| ASTM F 1988 : 1999 : R2008 | Standard Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use |
| L-P-504 Revision E:1991 | PLASTIC SHEET AND FILM, CELLULOSE ACETATE |
| IEEE 1656 : 2010 | TESTING THE ELECTRICAL, MECHANICAL, AND DURABILITY PERFORMANCE OF WILDLIFE PROTECTIVE DEVICES ON OVERHEAD POWER DISTRIBUTION SYSTEMS RATED UP TO 38 KV. |
| ASTM D 4182 : 1997 : R2004 | Standard Practice for Evaluation of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke (Withdrawn 2010) |
| BS EN ISO 8980-4:2006 | Ophthalmic optics. Uncut finished spectacle lenses Specifications and test methods for anti-reflective coatings |
| ISO 8980-4:2006 | Ophthalmic optics Uncut finished spectacle lenses Part 4: Specifications and test methods for anti-reflective coatings |
| EN ISO 8980-4:2006 | Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflective coatings (ISO 8980-4:2006) |
| ASTM F 2917 : 2013-01 | SPECIFICATION FOR BICYCLE TRAILER CYCLES DESIGNED FOR HUMAN PASSENGERS |
| ASTM F 2774 : 2009 | Standard Practice for Manufacturing Quality Control of Consumer Trampoline Bed Material |
| ANSI INCITS 322 : 2015 | INFORMATION TECHNOLOGY - CARD DURABILITY TEST METHODS |
| SAE J 1394 : 2013 | METRIC NONMETALLIC AIR BRAKE SYSTEM TUBING |
| ASTM F 1561 : 2003 : R2014 | Standard Performance Requirements for Plastic Chairs for Outdoor Use |
| ASTM F 1988 : 1999 | Standard Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use |
| ASTM F 1838 : 1998 : R2004 : EDT 1 | Standard Performance Requirements for Child's Plastic Chairs for Outdoor Use |
| DIN EN ISO 8980-4:2006-11 | Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflective coatings (ISO 8980-4:2006) |
| ASME A112.6.4 : 2003 : R2008 | ROOF, DECK, AND BALCONY DRAINS |
| ASME A112.6.4 : 2003 : R2012 | ROOF, DECK, AND BALCONY DRAINS |
| ASME A112.6.3 : 2016 | FLOOR AND TRENCH DRAINS |
| ASME A112.6.4 : 2003 | ROOF, DECK, AND BALCONY DRAINS |
| SAE J 2020 : 2016 | ACCELERATED EXPOSURE OF AUTOMOTIVE EXTERIOR MATERIALS USING A FLUORESCENT UV AND CONDENSATION APPARATUS |
| SAE J 2020 : 2016 | ACCELERATED EXPOSURE OF AUTOMOTIVE EXTERIOR MATERIALS USING A FLUORESCENT UV AND CONDENSATION APPARATUS |
| ASTM D 5870 : 2016 : REDLINE | Standard Practice for Calculating Property Retention Index of Plastics |
| ASTM G 154 : 2016 : REDLINE | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
| ISO 4892-3:2016 | Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps |
| ASTM G 113 : 2016 : REDLINE | Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials |
| ASTM G 147 : 2017 : REDLINE | Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests |
£62.61
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.