• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 4354 : 1999 : R2004

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Sampling of Geosynthetics for Testing
Available format(s)

Hardcopy , PDF

Superseded date

11-11-2014

Language(s)

English

Published date

01-11-2004

1.1 This practice covers three procedures for the sampling of geosynthetics for testing. This practice requires that instructions on taking laboratory samples and test specimens be part of every test method for geosynthetics.

1.1.1 The first procedure describes the sampling of production units for the purpose of manufacturer's quality control (MQC) ().

1.1.2 The second procedure describes the sampling of production units for the purpose of manufacturer's quality assurance (MQA) testing during the manufacturing process. This requires that backup statistical process control records be maintained during the manufacturing process ().

1.1.3 The third procedure describes the division of shipments of geosynthetics into lots and the determination of lot sample size for purchaser's specification conformance testing ().

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 35
DocumentType
Standard Practice
Pages
3
ProductNote
Reconfirmed 2004
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 7273/D7273M : 2008 : R2013 : EDT 1 Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
ASTM D 6637/D6637M : 2015 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
ASTM D 4751 : 2016 Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM D 6636 : 2001 : R2018 Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
ASTM D 6638 : 2018 Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)
ASTM D 7003/D7003M : 2003 : R2013 : EDT 1 Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes
ASTM D 6574/D6574M : 2013 : EDT 1 Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
ASTM D 7001 : 2006 : R2011 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
ASTM D 6706 : 2001 : R2013 Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil
ASTM D 5994/D5994M : 2010 : R2015 : EDT 1 Standard Test Method for Measuring Core Thickness of Textured Geomembranes
ASTM D 7931 : 2018 Standard Guide for Specifying Drainage Geocomposites
ASTM D 7275 : 2007 : R2018 Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGMs)
ASTM D 2643/D2643M : 2008 : R2019 Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)
ASTM D 6566 : 2018 Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats
ASTM D 6241 : 2014 Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D 4830/D4830M : 1998 : R2014 : EDT 1 Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing
ASTM D 7179 : 2018 Standard Test Method for Determining Geonet Breaking Force
ASTM D 4632/D4632M : 2015 : REV A Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
ASTM E 2777 : 2014 Standard Guide for Vegetative (Green) Roof Systems
ASTM D 7004/D7004M : 2003 : R2013 : EDT 1 Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes
ASTM D 1987 : 2018 Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters
ASTM D 6461/D6461M : 2018 Standard Specifications for Silt Fence Materials
ASTM D 6685 : 2001 : R2015 Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC) (Withdrawn 2024)
ASTM D 7274 : 2006 : REV A : R2018 : EDT 1 Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (PBGMs)
ASTM D 4716/D4716M : 2014 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM D 7499/D7499M : 2009 : R2014 Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness
ASTM D 4833/D4833M : 2007 : R2013 : EDT 1 Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products
ASTM D 6244 : 2006 : R2018 Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains
ASTM D 6524/D6524M : 2016 Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
ASTM D 6916 : 2018 Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
ASTM D 5141 : 2011 : R2018 Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device
ASTM D 7005/D7005M : 2016 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
ASTM D 5262 : 2007 : R2016 Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics
ASTM D 5199 : 2012 : R2019 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
ASTM D 7737/D7737M : 2015 Standard Test Method for Individual Geogrid Junction Strength
ASTM D 7498/D7498M : 2009 : R2014 : EDT 1 Standard Test Method for Vertical Strip Drains Using a Large Scale Consolidation Test
ASTM D 5884/D5884M : 2004 : REV A : R2015 : EDT 1 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
ASTM D 6072/D6072M : 2019 Standard Practice for Obtaining Samples of Geosynthetic Clay Liners
ASTM D 7748/D7748M : 2014 : EDT 1 Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products
ASTM D 4759 : 2011 : R2018 Standard Practice for Determining the Specification Conformance of Geosynthetics
ASTM D 6567 : 2018 Standard Test Method for Measuring the Light Penetration of a Rolled Erosion Control Product (RECP)
ASTM D 7701 : 2011 Standard Test Method for Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag (Withdrawn 2020)
ASTM D 6364 : 2006 : R2018 Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics
ASTM D 4886 : 2018 Standard Test Method for Abrasion Resistance of Geotextiles (Sandpaper/Sliding Block Method)
ASTM D 5494 : 1993 : R2018 Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes
ASTM D 4594/D4594M : 1996 : R2015 : EDT 1 Standard Test Method for Effects of Temperature on Stability of Geotextiles
ASTM D 6575/D6575M : 2016 Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)
ASTM D 8102 : 2017 Standard Practice for Manufacturing Quality Control of Geotextiles
ASTM D 7880/D7880M : 2013 Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag (Withdrawn 2022)
ASTM D 5493 : 2006 : R2016 Standard Test Method for Permittivity of Geotextiles Under Load
ASTM D 5321/D5321M : 2019 Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
ASTM D 6525/D6525M : 2018 Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products
ASTM D 7322/D7322M : 2017 Standard Test Method for Determination of Erosion Control Product (ECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions
ASTM D 5101 : 2012 : R2017 Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems
ASTM D 7864/D7864M : 2015 Standard Test Method for Determining the Aperture Stability Modulus of Geogrids
ASTM D 6475 : 2017 Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets
ASTM D 4873/D4873M : 2017 Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples
ASTM D 6454/D6454M : 1999 : R2016 : EDT 1 Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)
ASTM D 4533/D4533M : 2015 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
ASTM D 8203 : 2018 Standard Test Method for Determination of the Horizontal Water Flow Rate of a Geosynthetic Screening Material, Product, or Device
ASTM D 6455 : 2011 : R2018 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGMs)
ASTM D 5397 : 2019 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
ASTM D 6767 : 2016 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test
ASTM D 6918 : 2009 : R2014 : EDT 1 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition

View more information
£55.10
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.