• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 4626 : 1995 : R2015

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Calculation of Gas Chromatographic Response Factors
Available format(s)

Hardcopy , PDF

Superseded date

19-11-2023

Language(s)

English

Published date

01-04-2015

CONTAINED IN VOL. 05.02, 2015 Defines a procedure for calculating gas chromatographic response factors.

1.1This practice covers a procedure for calculating gas chromatographic response factors. It is applicable to chromatographic data obtained from a gaseous mixture or from any mixture of compounds that is normally liquid at room temperature and pressure or solids, or both, that will form a solution with liquids. It is not intended to be applied to those compounds that react in the chromatograph or are not quantitatively eluted. Normal C6 through C11 paraffins have been chosen as model compounds for demonstration purposes.

1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 02
DocumentType
Standard Practice
Pages
3
ProductNote
Reconfirmed 2015
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 6228 : 2019 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
ASTM D 7920 : 2015 : EDT 1 Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography
ASTM D 7398 : 2011 : R2016 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
ASTM D 6730 : 2001 : R2016 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100–Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
ASTM D 2804 : 2002 : R2012 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography (Withdrawn 2021)
ASTM D 3524 : 2014 Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
ASTM D 5623 : 2019 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D 7798 : 2015 Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538 °C by Ultra Fast Gas Chromatography (UF GC)
ASTM D 2887 : 2019 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 7213 : 2015 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
ASTM D 7800/D7800M : 2014 Standard Test Method for Determination of Elemental Sulfur in Natural Gas (Withdrawn 2023)
ASTM D 5441 : 1998 : R2017 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography
ASTM D 7807 : 2012 Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection
ASTM D 5501 : 2012 : R2016 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography
ASTM D 7164 : 2010 : R2015 Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
ASTM D 7096 : 2019 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
ASTM D 7796 : 2017 Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography
ASTM D 5442 : 2017 Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
ASTM D 7165 : 2010 : R2015 Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels
ASTM D 6352 : 2015 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography
ASTM D 7875 : 2014 Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography
ASTM D 6843 : 2010 : R2015 Standard Test Method for Silanes Used in Rubber Formulations <brk/>(bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)
ASTM D 6968 : 2003 : R2015 Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection (Withdrawn 2024)
ASTM D 2887 : 2019 : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 6417 : 2015 Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography

ASTM D 2427 : 1992 : R1996 Standard Test Method for Determination of C<sub>2</sub> through C<sub>5</sub> Hydrocarbons in Gasolines by Gas Chromatography
ASTM D 3545 : 2006 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography
ASTM D 2804 : 1998 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
ASTM D 3695 : 1995 : R2013 Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography
ASTM D 3695 : 1988 Standard Test Method for volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatogrpahy
ASTM D 3465 : 2014 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
ASTM D 3329 : 2003 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
ASTM D 2268 : 1993 : R1998 Standard Test Method for Analysis of High-Purity <i>n</i>-Heptane and <i>Iso</i>octane by Capillary Gas Chromatography
ASTM D 3362 : 2005 Standard Test Method for Purity of Acrylate Esters by Gas Chromatography (Withdrawn 2011)
ASTM D 3695 : 1995 Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography
ASTM D 2427 : 2006 Standard Test Method for Determination of C<inf>2</inf> through C<inf>5</inf> Hydrocarbons in Gasolines by Gas Chromatography
ASTM D 3329 : 1999 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
ASTM E 260 : 1996 Standard Practice for Packed Column Gas Chromatography
ASTM D 4307 : 1999 : R2004 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 2268 : 1993 : R2008 Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography
ASTM D 3545 : 2006 : R2012 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography (Withdrawn 2021)
ASTM D 4307 : 1999 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 2804 : 2002 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
ASTM D 2268 : 1993 : R2003 : EDT 1 Standard Test Method for Analysis of High-Purity <i>n</i>-Heptane and <i>Iso</i>octane by Capillary Gas Chromatography
ASTM D 3545 : 1995 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography
ASTM D 2427 : 2006 : R2011 Standard Test Method for Determination of C<sub>2</sub> through C<sub>5</sub> Hydrocarbons in Gasolines by Gas Chromatography
ASTM D 4307 : 2017 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 3362 : 1993 : R2000 Standard Test Method for Purity of Acrylate Esters by Gas Chromatography
ASTM D 2804 : 2002 : R2012 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography (Withdrawn 2021)
ASTM D 2804 : 2002 : R2007 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
ASTM D 2427 : 2006 : R2015 Standard Test Method for Determination of C<inf>2</inf> through C<inf>5</inf> Hydrocarbons in Gasolines by Gas Chromatography
ASTM D 3695 : 1995 : R2007 Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography
ASTM D 3465 : 2000 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
ASTM D 4307 : 1999 : R2010 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 2427 : 1992 : R2001 Standard Test Method for Determination of C<sub>2</sub> through C<sub>5</sub> Hydrocarbons in Gasolines by Gas Chromatography
ASTM D 4307 : 2017 : REDLINE Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 2998 : 1989 : R1996 : EDT 1 Standard Test Method for Polyhydric Alcohols in Alkyd Resins (Withdrawn 2004)
ASTM D 3545 : 2002 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography
ASTM D 2268 : 1993 : R2013 Standard Test Method for Analysis of High-Purity <emph type="ital">n</emph>-Heptane and <emph type="ital">Iso</emph>octane by Capillary Gas Chromatography
ASTM D 3695 : 1995 : R2001 Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography
ASTM D 3465 : 2000 : R2007 : EDT 1 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
ASTM D 3329 : 2003 : R2009 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
ASTM D 3465 : 2014 : REDLINE Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
ASTM D 2268 : 1993 : R2017 Standard Test Method for Analysis of High-Purity <emph type="ital">n</emph>-Heptane and <emph type="ital">Iso</emph>octane by Capillary Gas Chromatography
ASTM D 4307 : 1999 : R2015 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 3329 : 2003 : R2017 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography

View more information
£55.10
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.