ASTM D 4871 : 2011 : R2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
17-06-2022
English
21-11-2016
CONTAINED IN VOL. 05.02, 2016 Defines an apparatus used to measure the oxidation or thermal stability of liquids by subjecting them to temperatures in the range from 50 degrees C to 375 degrees C in the presence of air, oxygen, nitrogen, or other gases at flow rates of 1.5 L/h to 13 L/h, or in the absence of gas flow.
1.1This guide covers an apparatus used to measure the oxidation or thermal stability of liquids by subjecting them to temperatures in the range from 50 °C to 375 °C in the presence of air, oxygen, nitrogen, or other gases at flow rates of 1.5 L/h to 13 L/h, or in the absence of gas flow. Stability may be measured in the presence or absence of water or soluble or insoluble catalysts. Gases evolved may be allowed to escape, condensed and collected, or condensed and returned to the test cell.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
D 02
|
| DocumentType |
Guide
|
| Pages |
4
|
| ProductNote |
Reconfirmed 2016
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 5846 : 2007 : R2017 | Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus |
| ASTM D 5763 : 2011 : R2016 | Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware |
| ASTM D 5770 : 2011 : R2017 | Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing |
| ASTM D 6514 : 2003 : R2019 | Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils |
| ASTM D 91 : 1997 | Standard Test Method for Precipitation Number of Lubricating Oils |
| ASTM D 974 : 2014 : EDT 2 | Standard Test Method for Acid and Base Number by Color-Indicator Titration |
| ASTM D 974 : 2001 | Standard Test Method for Acid and Base Number by Color-Indicator Titration |
| ASTM D 6514 : 2003 : R2014 | Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils |
| ASTM D 5770 : 2002 | Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing |
| ASTM D 3339 : 1995 : EDT 2 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
| ASTM D 6514 : 2003 : R2008 | Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils |
| ASTM D 5763 : 1995 : R2006 | Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware |
| ASTM D 5846 : 2002 | Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus |
| ASTM D 5846 : 2007 : R2017 | Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus |
| ASTM D 1500 : 2004 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 5846 : 2007 : R2012 | Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus |
| ASTM D 5763 : 1995 : R2006 : EDT 1 | Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware |
| ASTM D 974 : 2021 | Standard Test Method for Acid and Base Number by Color-Indicator Titration |
| ASTM D 5770 : 2011 : R2017 | Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing |
| ASTM D 1500 : 2012 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 3339 : 2012 : R2017 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
| ASTM D 156 : 2015 : REDLINE | Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) |
| ASTM D 445 : 1988 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity) |
| ASTM D 3339 : 2012 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
| ASTM D 1500 : 2003 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 3339 : 2008 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
| ASTM D 1500 : 1982 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 5770 : 2002 : R2007 | Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing |
| ASTM D 6514 : 2000 | Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils |
| ASTM D 664 : 1995 | Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration |
| ASTM D 1500 : 2002 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 5763 : 1995 | Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware |
| ASTM D 1500 : 1998 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 6514 : 2002 | Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils |
| ASTM D 1500 : 2012 : R2017 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 445 : 2019 : REV A | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| ASTM D 3339 : 2011 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
| ASTM D 3339 : 1995 : R2000 : EDT 1 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
| ASTM D 91 : 2002 : R2007 | Standard Test Method for Precipitation Number of Lubricating Oils |
| ASTM D 6514 : 2003 : R2019 | Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils |
| ASTM D 6514 : 2003 : R2019 : EDT 1 | Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils |
| ASTM D 5846 : 1999 | Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus |
| ASTM D 445 : 2001 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity) |
| ASTM D 445 : 2021 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| ASTM D 3339 : 2007 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
| ASTM D 5763 : 1995 : R2001 | Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware |
| ASTM D 5763 : 2011 : R2016 | Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware |
| ASTM D 6514 : 2003 | Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils |
| ASTM D 3339 : 2004 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
| ASTM D 1500 : 2004 : REV A | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 1500 : 2007 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 445 : 2021 : EDT 1 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| ASTM D 5846 : 2007 | Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus |
| ASTM D 3339 : 2021 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
| ASTM D 5770 : 1996 | Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing |
| ASTM D 5763 : 2011 | Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware |
| ASTM D 3339 : 2002 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
| ASTM D 5770 : 2011 | Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.