Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

31-05-2018

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 05.06, 2018 Define test method that covers determining the activity and selectivity of either equilibrium or laboratory deactivated fluid catalytic cracking (FCC) catalysts.

1.1This test method covers determining the activity and selectivity of either equilibrium or laboratory deactivated fluid catalytic cracking (FCC) catalysts. The activity is evaluated on the basis of mass percent conversion of gas oil feed in a microactivity unit. The selectivities are evaluated on the basis of mass percent yields of specifically defined products resulting from the catalytic cracking of gas oil feed.

1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 32
DevelopmentNote	Supersedes ASTM D 5154. (06/2018)
DocumentType	Test Method
Pages	9
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 5154 : 2010

ASTM E 177 : 1990 : REV A : R1996	Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E 177 : 2014 : REDLINE	Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E 456 : 2002	Standard Terminology for Relating to Quality and Statistics
ASTM E 456 : 2013 : REV A : R2022	Standard Terminology Relating to Quality and Statistics
ASTM D 2887 : 2006	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 3907 : 2003	Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM E 456 : 2013 : REV A : R2022 : EDT 1	Standard Terminology Relating to Quality and Statistics
ASTM E 691 : 2020	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 105 : 2016 : REDLINE	Standard Practice for Probability Sampling of Materials
ASTM D 2887 : 1999	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM E 456 : 2013 : REV A : R2017 : EDT 5	Standard Terminology Relating to Quality and Statistics
ASTM D 2887 : 2006 : REV A	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2022 : EDT 1	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2014	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2001	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM E 105 : 2021	Standard Guide for Probability Sampling of Materials
ASTM E 691 : 2019 : EDT 1	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2023	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 2887 : 2022	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2019 : REV A : EDT 1	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2001 : REV A	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM E 691 : 2022	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 2887 : 2023	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 4463 : 1996 : R2006	Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
ASTM E 691 : 2009	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 2887 : 2016	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2008	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2019 : EDT 1	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2018	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2012	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 7964/D7964M : 2014	Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
ASTM E 691 : 2021	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 2887 : 2019	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM E 105 : 2016	Standard Practice for Probability Sampling of Materials
ASTM D 4463 : 1996	Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
ASTM D 2887 : 2019 : REV A	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2013	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2015	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2015 : EDT 1	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2004	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 4463 : 1996 : R2001	Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
ASTM D 2887 : 2002	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 3907 : 2003 : R2008	Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D 3907 : 1992	Standard Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test (Withdrawn 2001)
ASTM E 456 : 2013 : REV A : R2017 : EDT 4	Standard Terminology Relating to Quality and Statistics
ASTM E 456 : 2013 : REV A : R2017 : EDT 6	Standard Terminology Relating to Quality and Statistics
ASTM D 2887 : 2016 : REV A	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2004 : REV A	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2019 : REV A : EDT 2	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2003	Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography