• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 5752 : 2010 : R2017

Current
Current

The latest, up-to-date edition.

Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-04-2017

CONTAINED IN VOL. 15.05, 2017 Defines the general, physical, chemical, and performance requirements for Supplemental Coolant Additives (SCAs) at a precharged level in the cooling systems of heavy-duty engines.

1.1This specification covers the general, physical, chemical, and performance requirements for Supplemental Coolant Additives (SCAs) at a precharged level in the cooling systems of heavy-duty engines.

Note 1:After precharging, SCAs are customarily used periodically to service cooling systems at 1/4to 1/3the precharged dosage to compensate for additives lost through dilution and depletion.

1.2The SCA products meeting this specification are intended for use with water, with recommended dilutions of coolant concentrates, with prediluted engine coolants, or to upgrade the performance of light-duty engine coolants to meet the heav-duty requirements of Specification D6210. Engine coolant products shall be of the low-silicate type and, if ethylene glycol based, shall meet Specification D4985. Propylene glycol base low-silicate type coolant products may also be used, if these materials meet the chemical and performance requirements of Specification D4985.

1.3The SCA concentrate, before dissolution, may be in either liquid, solid, or slurry form. The form is as agreed upon between the manufacturer and the user.

1.4The values stated in SI units are to be regarded as standard. The inch-pound units in parentheses are approximate equivalents provided for information only.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 15
DocumentType
Standard
Pages
7
ProductNote
Reconfirmed 2017
PublisherName
American Society for Testing and Materials
Status
Current

ASTM D 516 : 2016 Standard Test Method for Sulfate Ion in Water
ASTM D 6129 : 1997 : R2002 Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
ASTM E 1177 : 2020 Standard Specification for Engine Coolant Grade Glycol
ASTM D 1287 : 2011 : R2020 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 6210 : 2017 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines<rangeref></rangeref >
ASTM D 1384 : 2001 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM E 1177 : 2009 : R2014 Standard Specification for Engine Coolant Grade Glycol
ASTM D 1384 : 2024 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM G 32 : 2016 : REDLINE Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
ASTM D 1287 : 1991 : R1997 : EDT 1 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 6471 : 2003 Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service
ASTM D 512 : 2012 Standard Test Methods for Chloride Ion In Water (Withdrawn 2021)
ASTM D 3634 : 1999 : R2009 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 1287 : 2009 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 5828 : 1997 : R2023 Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates
ASTM D 5828 : 1997 : R2011 : EDT 1 Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates
ASTM D 6472 : 2006 Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service
ASTM E 1177 : 2003 Standard Specification for Engine Coolant Grade Ethylene Glycol
ASTM E 1177 : 2009 Standard Specification for Engine Coolant Grade Ethylene Glycol
ASTM D 6210 : 2004 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
ASTM D 6210 : 2008 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
ASTM D 1119 : 2005 : R2015 Standard Test Method for Percent Ash Content of Engine Coolants
ASTM D 6472 : 2000 Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service
ASTM D 4985 : 2010 : R2023 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM E 1177 : 2005 Standard Specification for Engine Coolant Grade Ethylene Glycol
ASTM D 4340 : 1996 : R2007 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
ASTM D 2570 : 1991 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 1193 : 1977 : R1983 : EDT 1 Standard Specification for Reagent Water
ASTM D 1287 : 2011 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 3634 : 1999 : R2005 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 1121 : 2007 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
ASTM D 1882 : 1996 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
ASTM D 2570 : 2016 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 1121 : 2011 : R2020 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
ASTM E 1177 : 2014 : REDLINE Standard Specification for Engine Coolant Grade Glycol
ASTM D 1882 : 1996 : R2006 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
ASTM D 1121 : 1967 Standard Method Of Test For Reserve Alkalinity Of Engine Antifreezes And Antirusts
ASTM D 516 : 2022 Standard Test Method for Sulfate Ion in Water
ASTM D 2809 : 1994 : R1999 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 4985 : 2003 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM D 4327 : 2011 Standard Test Method for Anions in Water by Suppressed Ion Chromatography
ASTM G 32 : 2016 : R2021 : EDT 1 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
ASTM D 5827 : 2009 : EDT 1 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 1384 : 2005 : EDT 1 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 6130 : 1997 : REV A : R2009 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 512 : 2023 Standard Test Methods for Chloride Ion In Water
ASTM D 1287 : 2011 : REDLINE Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 6210 : 2010 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
ASTM D 4985 : 2005 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM D 5828 : 1997 Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates
ASTM D 1119 : 2005 : R2009 Standard Test Method for Percent Ash Content of Engine Coolants
ASTM D 1882 : 1996 : R2001 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
ASTM D 1193 : 2006 : R2011 Standard Specification for Reagent Water
ASTM D 516 : 2016 : REDLINE Standard Test Method for Sulfate Ion in Water
ASTM D 5827 : 2022 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 6471 : 2005 Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service
ASTM D 6471 : 1999 Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service
ASTM E 1177 : 2003 : REV A Standard Specification for Engine Coolant Grade Ethylene Glycol
ASTM D 4985 : 2010 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM D 3634 : 1999 : R2005 : EDT 1 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 1126 : 2002 Standard Test Method for Hardness in Water
ASTM D 1882 : 2017 : R2021 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
ASTM E 1177 : 2019 Standard Specification for Engine Coolant Grade Glycol
ASTM D 2809 : 2021 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 1293 : 1999 Standard Test Methods for pH of Water
ASTM D 5828 : 1997 : R2018 Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates
ASTM D 1881 : 1997 : R2009 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 1881 : 1997 : R2002 : EDT 1 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 4327 : 2003 Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography
ASTM D 6472 : 2003 Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service
ASTM D 1121 : 2011 : REDLINE Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
ASTM D 1882 : 2017 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
ASTM D 6129 : 1997 Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
ASTM D 6130 : 2011 : R2018 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 1881 : 2017 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 6129 : 1997 : R2015 Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
ASTM D 1881 : 1997 : R2002 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 1119 : 2005 Standard Test Method for Percent Ash Content of Engine Coolants
ASTM D 1882 : 1996 : R2012 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
ASTM D 2809 : 2009 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 1193 : 1991 Standard Specification for Reagent Water
ASTM D 2570 : 2009 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 6210 : 2003 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
ASTM D 6210 : 2006 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
ASTM D 1119 : 2000 Standard Test Method for Percent Ash Content of Engine Coolants and Antirusts
ASTM D 4340 : 1996 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
ASTM D 4985 : 2009 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM E 1177 : 2014 Standard Specification for Engine Coolant Grade Glycol
ASTM D 1293 : 1999 : R2005 Standard Test Methods for pH of Water
ASTM D 1119 : 2022 Standard Test Method for Percent Ash Content of Engine Coolants
ASTM D 3634 : 2021 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 6130 : 1997 : REV A : R2003 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 1121 : 2011 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
ASTM D 1384 : 1997 : REV A Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1287 : 1991 : R2002 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 1384 : 2004 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1126 : 2012 Standard Test Method for Hardness in Water
ASTM D 1121 : 1998 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
ASTM D 2570 : 2008 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 1384 : 2005 : R2019 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1293 : 2018 Standard Test Methods for pH of Water
ASTM D 4327 : 2017 Standard Test Method for Anions in Water by Suppressed Ion Chromatography
ASTM D 6210 : 1998 : REV A Standard Specification for Fully-Formulated Ethylene-Glycol-Base Engine Coolant for Heavy-Duty Engines
ASTM D 4327 : 1997 Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography
ASTM D 1126 : 2002 : R2007 : EDT 1 Standard Test Method for Hardness in Water
ASTM D 5827 : 1995 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 4340 : 2019 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
ASTM D 4340 : 1996 : R2001 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
ASTM D 1126 : 2017 Standard Test Method for Hardness in Water
ASTM D 2809 : 2009 : R2017 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 3634 : 1999 : R2015 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM E 1177 : 1998 Standard Specification for Engine Coolant Grade Ethylene Glycol
ASTM D 6472 : 2005 Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service
ASTM D 1126 : 1996 Standard Test Method for Hardness in Water
ASTM D 2809 : 2004 : EDT 2 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 6129 : 1997 : R2007 Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
ASTM D 2809 : 2004 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 6130 : 2011 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 6472 : 2010 Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service (Withdrawn 2019)
ASTM D 1193 : 1970 Standard Specification For Reagent Water
ASTM D 1384 : 2005 : R2012 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1193 : 2006 Standard Specification for Reagent Water
ASTM D 5827 : 2009 : R2015 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM G 32 : 2016 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
ASTM D 2809 : 2004 : EDT 1 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 1293 : 2012 Standard Test Methods for pH of Water
ASTM D 1193 : 1999 Standard Specification for Reagent Water
ASTM D 4985 : 2000 : REV A Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM D 1384 : 2005 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1881 : 1997 : R2002 : EDT 2 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 2570 : 1996 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 5827 : 2009 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 4340 : 2010 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
ASTM D 6129 : 1997 : R2021 Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
ASTM D 6471 : 2006 Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service
ASTM E 1177 : 2022 Standard Specification for Engine Coolant Grade Glycol
ASTM D 2570 : 2016 : REDLINE Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 5828 : 1997 : R2002 Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates
ASTM D 1881 : 1997 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 2570 : 2010 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 3634 : 1999 : EDT 1 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 6210 : 2003 : EDT 1 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
ASTM D 1293 : 1984 : R1990 Standard Test Methods for pH of Water
ASTM D 6471 : 2010 Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service (Withdrawn 2019)
ASTM E 1177 : 2006 Standard Specification for Engine Coolant Grade Ethylene Glycol
ASTM D 4985 : 2010 : R2015 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM D 6130 : 1997 : REV A Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM E 1177 : 2023 Standard Specification for Engine Coolant Grade Glycol

View more information
£52.59
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.