Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products

Available format(s)

PDF

Language(s)

English

Published date

03-08-2017

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 06.01, 2017 Specifies various types of cold rolled steel panels and the procedures to be followed in their preparation for testing paint, varnish, lacquer, conversion coatings, and related products.

1.1This practice covers various types of cold rolled steel panels and the procedures to be followed in their preparation for testing paint, varnish, lacquer, conversion coatings, and related products.

1.2The procedures are as follows:
Procedure A—Conversion coatings (phosphates, chromates,
etc.)
Procedure B—Vapor degreasing
Procedure C—Solvent brushing
Procedure D—Solvent wiping
Procedure E—Alkaline cleaning

1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 01
DocumentType	Redline
Pages	3
PublisherName	American Society for Testing and Materials
Status	Current

ASTM D 6675 : 2001 : R2015	Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel
ASTM D 2197 : 2016 : REDLINE	Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
CGSB 1-GP-180MA : 82(R1996)	COATING, POLYURETHANE, TWO-PACKAGE, GENERAL PURPOSE
A-A-50557 Base Document:1996	PRIMER, WATER-BORNE, ACRYLIC OR MODIFIED ACRYLIC, FOR METAL SURFACES
MIL-PRF-3135 Revision H:2008	DECK COVERING UNDERLAY MATERIALS
ASTM D 6189 : 1997 : R2008	Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings
MIL-PRF-24763 Revision B:2009	ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE
MIL-DTL-450 Revision D:2011	COATING COMPOUND, BITUMINOUS SOLVENT TYPE, BLACK (FOR AMMUNITION)
ASTM D 2201 : 2018 : REDLINE	Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
ASTM D 3322 : 1982 : R2001	Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
ASTM D 2803 : 2009	Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
ASTM D 2794 : 1993 : R1999 : EDT 1	Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 6762 : 2002 : REV A	Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings
ASTM D 2248 : 2001 : REV A : R2007	Standard Practice for Detergent Resistance of Organic Finishes
ASTM D 3089 : 1997 : R2008	Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM D 6577 : 2015 : REDLINE	Standard Guide for Testing Industrial Protective Coatings
ASTM D 1186 : 2001	Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base (Withdrawn 2006)
ASTM D 2248 : 2001 : REV A : R2018	Standard Practice for Detergent Resistance of Organic Finishes
ASTM D 6762 : 2002	Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings
ASTM D 6762 : 2002 : REV A : R2017	Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings
ASTM D 3214 : 1996	Standard Test Methods for Coating Powders and Their Coatings Used for Electrical Insulation (Withdrawn 2002)
ASTM D 6486 : 2001	Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings
ASTM D 1730 : 2009	Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
ASTM D 1730 : 2009 : R2014	Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
ASTM D 6905 : 2003 : R2012	Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D 7091 : 2013 : REDLINE	Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
NACE RP 02 81 : 2004	METHOD FOR CONDUCTING COATING (PAINT) PANEL EVALUATION TESTING IN ATMOSPHERIC EXPOSURES
DOD-F-24610 Base Document:1982	FIXANT, HOLD DOWN
SAE J 1804 : 2016	CORROSION PREVENTIVE COMPOUND, TOPSIDE VEHICLE CORROSION PROTECTION
SAE AMS F 24610 : 2016	FIXANT, HOLD DOWN
ASTM D 4338:1997	Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
MIL-P-24351 Revision A:1985	PRIMER COATING, ALKYD, BLUE (FORMULA NO. 6N35-2)
MIL-I-24718 Base Document:1990	INSULATING RESINS, SOLVENTLESS, VACUUM-PRESSURE-IMPREGNATING - GENERAL SPECIFICATION FOR
ASTM D 1308 : 2002 : R2013	Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
TT-P-001385 Base Document:1976	PRIMER COATING, SYNTHETIC, GRAY (FOR METAL EQUIPMENT)
MIL-C-82747 Base Document:1988	COATING, POLYURETHANE CLEAR, SAFFLOWER OIL MODIFIED ALKYD
SS-S-1996 Base Document:1976	SEALER, WATER AND WEATHER RESISTANT, FOR ASPHALT, CONCRETE, AND MASONRY SURFACES
ASTM D 6675 : 2001 : R2011	Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel
SSPC-PAINT 24 : 2016	LATEX EXTERIOR FINISH COAT FOR STEEL SURFACES, PERFORMANCE-BASED
ASTM D 2246 : 1987	Standard Method of Testing Finishes on Primed Metallic Substrates for Humidity-Thermal Cycle Cracking (Withdrawn 1992)
TT-P-605 Revision B:1976	PRIMER COATING, ALL PURPOSE GRAY, ALKYD (IN PRESSURIZED DISPENSERS)
A-A-1788 Base Document:1997	VARNISH, OIL: INTERIOR
NFF 19 291 : 2002	RAILWAY APPLICATIONS - OUTDOOR PAINTS FOR TOP COAT COMPRISING A BASE COAT AND A CLEAR COAT FOR CONSERVATION AND ORNAMENTATION
ASTM D 6905 : 2003	Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D 6486 : 2001 : R2005	Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings
ASTM D 6762 : 2002 : REV A : R2009 : EDT 1	Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings
ASTM D 3322 : 1982 : R2011	Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
ASTM D 3322 : 1982 : R2005	Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
ASTM D 6486 : 2001 : R2011	Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings
ASTM D 2248 : 2001	Standard Practice for Detergent Resistance of Organic Finishes
ASTM D 2803 : 2009 : R2015	Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
ASTM D 2248 : 2001 : REV A : R2013	Standard Practice for Detergent Resistance of Organic Finishes
ASTM D 3170/D3170M : 2014 : REDLINE	Standard Test Method for Chipping Resistance of Coatings
ASTM D 333 : 2001 : R2007	Standard Guide for Clear and Pigmented Lacquers
ASTM D 345 : 2002	Side bearings of the freight wagon bogies. General specifications
ASTM D 6899 : 2003	Standard Guide for Laboratory Cyclic Corrosion Testing of Automotive Painted Steel (Withdrawn 2010)
MIL-P-20689 Revision D:1988	PLASTIC PLASTISOL (FOR COATING METALLIC OBJECTS)
SSPC-PAINT 23 : 2013	LATEX PRIMER FOR STEEL SURFACES, PERFORMANCE-BASED
ASTM D 6905 : 2003 : R2008	Standard Test Method for Impact Flexibility of Organic Coatings
MIL-PRF-24613 Revision A:2007	DECK COVERING MATERIALS, INTERIOR, COSMETIC POLYMERIC
TT-C-498 Revision C:1980	COATING COMPOUND, BITUMINOUS, FILLERS, SOLVENT TYPE, ALUMINUM PIGMENTED
MIL-PRF-24635 Revision E:2009	COATING SYSTEMS, WEATHER-RESISTANT, EXTERIOR USE
SSPC-PS 26.00 : 2016	ALUMINUM-PIGMENTED EPOXY COATING SYSTEM MATERIALS STANDARD, PERFORMANCE-BASED
ASTM D 1731 : 2009	Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting
ASTM D 1882 : 2017 : REDLINE	Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
NACE TM 01 84 : 83(R1994)	ACCELERATED TEST PROCEDURES FOR SCREENING ATMOSPHERIC SURFACE COATING SYSTEMS FOR OFFSHORE PLATFORMS AND EQUIPMENT
ASTM D 5178 : 2016 : REDLINE	Standard Test Method for Mar Resistance of Organic Coatings
ASTM D 3399 : 1981 : R1995	Standard Specification for General-Purpose Synthetic Detergent Liquid (Withdrawn 2000)
ASTM D 3451 : 2006	Standard Guide for Testing Coating Powders and Powder Coatings
ASTM D 3322 : 1982 : R1996 : EDT 1	Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
ASTM D 333 : 2001 : R2013	Standard Guide for Clear and Pigmented Lacquers
ASTM D 1731 : 2009 : R2014	Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting
ASTM D 4712 : 1987 : REV A : R1996	Standard Guide for Testing Industrial Water-Reducible Coatings
ASTM G 85 : 2011 : REDLINE	Standard Practice for Modified Salt Spray (Fog) Testing
ASTM D 2939 : 2003	Standard Test Methods for Emulsified Bitumens Used as Protective Coatings (Withdrawn 2012)
ASTM D 4338 : 1997 : R2004	Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D 6762 : 2002 : EDT 1	Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings
ASTM D 2248 : 2001 : REV A	Standard Practice for Detergent Resistance of Organic Finishes
MIL-PRF-62218 Revision B:1996	CORROSION PREVENTIVE COMPOUNDS, COLD APPLICATION (FOR NEW AND FIELD MOTOR VEHICLES AND TRAILERS)
ASTM D 2485 : 2018 : REDLINE	Standard Test Methods for Evaluating Coatings For High Temperature Service
CGSB 1.300 : 2000	APPLIED COATING SYSTEM OF SEMIGLOSS BAKED FINISH FOR METAL OFFICE FURNITURE
ASTM D 4587 : 2011 : REDLINE	Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
MIL-PRF-14105 Revision E:2011	PAINT, HEAT-RESISTING (FOR STEEL SURFACES)
MIL E 24763 : A	ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE
ASTM D 3451 : 2006 : R2012	Standard Guide for Testing Coating Powders and Powder Coatings
ASTM D 4712 : 1987 : REV A : R2001	Standard Guide for Testing Industrial Water-Reducible Coatings
TT-P-28 Revision H:2007	PAINT, ALUMINUM, HEAT RESISTING
SAE J 1959 : 2016	CORROSION PREVENTIVE COMPOUND, UNDERBODY VEHICLE CORROSION PROTECTION
ASTM D 870 : 2015	Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
ASTM D 333 : 2001	Standard Guide for Clear and Pigmented Lacquers
ASTM D 6675 : 2001	Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel
ASTM D 2794 : 1993 : R2010	Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 2247 : 2015 : REDLINE	Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
GOST 849:2018	Primary nickel. SpecificationsE
CGSB 1.198 : 2001	CEMENTITIOUS PRIMER FOR GALVANIZED SURFACES
ASTM D 4338 : 1997 : R2016	Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D 6189 : 1997 : R2014	Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings
ASTM D 6695 : 2016 : REDLINE	Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 6189 : 1997 : R2003	Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings
MIL-P-28577 Revision B:1988	PRIMER, WATER REDUCIBLE, CORROSION RESISTANT, FOR METAL SURFACES
ASTM D 1735 : 2014 : REDLINE	Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 6675 : 2001 : R2006	Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel
ASTM D 2794 : 1993 : R2004	Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 2198 : 2002	Standard Test Method for Stain Removal From Multicolor Lacquers (Withdrawn 2003)
TT-E-001384 Base Document:1979	ENAMEL, GLOSS, SYNTHETIC (FOR METAL EQUIPMENT)
ASTM D 2454 : 2014-03	PRACTICE FOR DETERMINING THE EFFECT OF OVERBAKING ON ORGANIC COATINGS
ASTM D 3322 : 1982 : R2017	Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
ASTM D 4712 : 1987 : REV A : R2005	Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014)
ASTM D 7187 : 2015 : REDLINE	Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
ASTM D 2794 : 1993	TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT)
ASTM D 6486 : 2001 : R2017	Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings
ASTM D 1308 : 2002	Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM D 3451 : 2006 : R2017	Standard Guide for Testing Coating Powders and Powder Coatings
ASTM D 1308 : 2002 : R2007	Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM D 1308 : 2002 : EDT 1	Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM D 6189 : 1997	Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings
ASTM D 3359 : 2017 : REDLINE	Standard Test Methods for Rating Adhesion by Tape Test
ASTM C 957/C957M : 2017 : REDLINE	Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
ASTM D 4338 : 1997 : R2011 : EDT 1	Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend