ASTM D 6224 : 2022

Name: ASTM D 6224 : 2022
Brand: ASTM
Price: 69.29 GBP

Superseded

View Superseded by

Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment

Available format(s)

Hardcopy , PDF

Superseded date

18-11-2023

Language(s)

English

Published date

07-04-2022

Publisher

American Society for Testing and Materials

1.1This practice covers the requirements for the effective monitoring of mineral oil and phosphate ester fluid lubricating oils in service auxiliary (non-turbine) equipment used for power generation. Auxiliary equipment covered includes gears, hydraulic systems, diesel engines, pumps, compressors, and electrohydraulic control (EHC) systems. It includes sampling and testing schedules and recommended action steps, as well as information on how oils degrade.

Note 1:Other types of synthetic lubricants are sometimes used but are not addressed in this practice because they represent only a small fraction of the fluids in use. Users of these fluids should consult the manufacturer to determine recommended monitoring practices.

1.2This practice does not cover the monitoring of lubricating oil for steam and gas turbines. Rather, it is intended to complement Practice D4378.

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 02
DocumentType	Standard Practice
Pages	20
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM D 6224 : 2023
Supersedes	ASTM D 6224 : 2016

ASTM D 7590 : 2022	Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry
ASTM D 8506 : 2023	Standard Guide for Microbial Contamination and Biodeterioration in Turbine Oils and Turbine Oil Systems
ASTM D 8112 : 2022	Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid
ASTM D 6971 : 2009 : R2014	Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
ASTM D 7590 : 2009 : R2014	Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry
ASTM D 4378 : 2020	Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
ASTM D 7669 : 2020	Standard Guide for Practical Lubricant Condition Data Trend Analysis
ASTM D 6810 : 2021	Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
ASTM D 7720 : 2021	Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
ASTM D 8112 : 2017	Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid
ASTM D 8185 : 2018	Standard Guide for In-Service Lubricant Viscosity Measurement

ASTM D 4057 : 2019	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 974 : 2014 : EDT 2	Standard Test Method for Acid and Base Number by Color-Indicator Titration
ASTM F 312 : 2008 : R2023	Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
ASTM D 6971 : 2022	Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
ASTM D 664 : 2017 : REV A	Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D 7687 : 2023	Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D 892 : 2018	Standard Test Method for Foaming Characteristics of Lubricating Oils
ASTM D 4052 : 2018 : REV A	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 1298 : 2012 : REV B : R2017 : EDT 1	Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 943 : 2019	Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
ASTM D 6971 : 2009 : R2014	Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
ASTM D 4175 : 2022	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 974 : 2022	Standard Test Method for Acid and Base Number by Color-Indicator Titration
ASTM D 7414 : 2021	Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 1298 : 2012 : REV B : R2017	Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 445 : 2021 : EDT 2	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM F 312 : 2008 : R2016	Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
ASTM D 974 : 2021	Standard Test Method for Acid and Base Number by Color-Indicator Titration
ASTM D 445 : 2017 : REV A	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 4175 : 2020 : REV B : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2022 : REV A	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 7414 : 2022	Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 4378 : 2020	Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
ASTM D 4739 : 2017	Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
ASTM D 4175 : 2023	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 95 : 2013 : R2018	Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
ASTM D 7687 : 2021	Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D 4175 : 2022 : REV A : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 943 : 2018	Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
ASTM D 1500 : 2012 : R2017	Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 445 : 2019 : REV A	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 6810 : 2022	Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
ASTM D 4378 : 2022	Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
ASTM D 2272 : 2014 : REV A	Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
ASTM D 445 : 2019	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 4175 : 2023 : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2022 : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 664 : 2011 : REV A	Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D 445 : 2021	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 2896 : 2015	Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D 2272 : 2022	Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
ASTM D 4739 : 2023	Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
ASTM D 4057 : 2022	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 892 : 2023	Standard Test Method for Foaming Characteristics of Lubricating Oils
ASTM E 1064 : 2023	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 4052 : 2022	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 892 : 2018 : EDT 1	Standard Test Method for Foaming Characteristics of Lubricating Oils
ASTM D 445 : 2018	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 445 : 2021 : EDT 1	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 95 : 2023	Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
ASTM E 1064 : 2016	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 6810 : 2021	Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
ASTM D 2273 : 2008 : R2016	Standard Test Method for Trace Sediment in Lubricating Oils (Withdrawn 2023)
ASTM D 445 : 2023	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)