ASTM D 6270 : 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Practice for Use of Scrap Tires in Civil Engineering Applications
Available format(s)
Hardcopy , PDF
Superseded date
26-09-2020
Language(s)
English
Published date
15-12-2017
1.1This practice provides guidance for testing the physical properties, design considerations, construction practices, and leachate generation potential of processed or whole scrap tires in lieu of conventional civil engineering materials, such as stone, gravel, soil, sand, lightweight aggregate, or other fill materials.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
D 34
|
| DocumentType |
Standard Practice
|
| Pages |
21
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 7760 : 2018 | Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter |
| ASTM D 5681 : 2018 | Standard Terminology for Waste and Waste Management |
| ASTM D 1566 : 2004 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 4253 : 2014 | Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
| ASTM D 1566 : 2009 | Standard Terminology Relating to Rubber |
| ASTM D 4253 : 2016 | Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
| ASTM D 5681 : 2017 | Standard Terminology for Waste and Waste Management |
| ASTM D 2974 : 2020 | Standard Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils |
| ASTM D 1566 : 2006 | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2008 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 1557 : 2007 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 1566 : 2005 | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2002 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 2974 : 2007 : REV A | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils |
| ASTM D 5681 : 2008 | Standard Terminology for Waste and Waste Management |
| ASTM D 5681 : 2018 | Standard Terminology for Waste and Waste Management |
| ASTM D 1566 : 2007 | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2019 | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2015 | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2008 | Standard Terminology Relating to Rubber |
| ASTM D 4253 : 2000 | Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
| ASTM D 4253 : 2016 : EDT 1 | Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
| ASTM D 1566 : 2005 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 3080 : 2004 | Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions |
| ASTM D 5681 : 1998 : REV A | Standard Terminology for Waste and Waste Management |
| ASTM D 2974 : 2020 : EDT 1 | Standard Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils |
| ASTM D 7760 : 2018 | Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter |
| ASTM D 5681 : 2016 | Standard Terminology for Waste and Waste Management |
| ASTM D 4253 : 2000 : R2006 | Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
| ASTM D 1566 : 2006 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2003 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2006 : REV B | Standard Terminology Relating to Rubber |
| ASTM D 5681 : 2009 | Standard Terminology for Waste and Waste Management |
| ASTM D 1557 : 2012 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 1557 : 2012 : EDT 1 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 2434 : 2019 | Standard Test Method for Permeability of Granular Soils (Constant Head) |
| ASTM D 2974 : 2000 | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils |
| ASTM D 1566 : 2005 : REV B | Standard Terminology Relating to Rubber |
| ASTM D 2974 : 2007 | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils |
| ASTM D 1566 : 2011 | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2000 : REV B | Standard Terminology Relating to Rubber |
| ASTM D 1557 : 2002 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup>(2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 2974 : 2014 | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils |
| ASTM D 5681 : 1998 : REV A : EDT 1 | Standard Terminology for Waste and Waste Management |
| ASTM D 1566 : 2014 | Standard Terminology Relating to Rubber |
| ASTM D 2974 : 2013 | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils |
| ASTM D 1557 : 2000 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup>(2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 5681 : 1998 : REV A : R2004 | Standard Terminology for Waste and Waste Management |
| ASTM D 3080 : 1998 | Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions |
| ASTM D 1566 : 2010 | Standard Terminology Relating to Rubber |
| ASTM D 5681 : 2016 : REV A | Standard Terminology for Waste and Waste Management |
| ASTM D 5681 : 1998 : REV A : R2004 : EDT 1 | Standard Terminology for Waste and Waste Management |
| ASTM D 5681 : 2020 | Standard Terminology for Waste and Waste Management |
| ASTM D 1566 : 2003 | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2000 | Standard Terminology Relating to Rubber |
| ASTM D 2434 : 1968 : R2006 | Standard Test Method for Permeability of Granular Soils (Constant Head) (Withdrawn 2015) |
| ASTM D 1566 : 2007 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 1557 : 2009 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 2434 : 1968 : R2000 | Standard Test Method for Permeability of Granular Soils (Constant Head) |
| ASTM D 1566 : 2005 : REV C | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2010 : EDT 1 | Standard Terminology Relating to Rubber |
| ASTM D 5681 : 2013 | Standard Terminology for Waste and Waste Management |
| ASTM D 7760 : 2012 | Standard Test Method for Measurement of Hydraulic Conductivity of Tire Derived Aggregates Using a Rigid Wall Permeameter |
| ASTM D 3080 : 2003 | Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions |
| ASTM D 1566 : 2008 : REV B | Standard Terminology Relating to Rubber |
£90.16
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.