Name: ASTM D 6448 : 2016
Brand: ASTM
Price: 45.92 GBP

ASTM D 6448 : 2016

Superseded

View Superseded by

Standard Specification for Industrial Burner Fuels from Used Lubricating Oils

Available format(s)

Hardcopy , PDF

Superseded date

05-11-2022

Language(s)

English

Published date

22-04-2016

Publisher

American Society for Testing and Materials

1.1This specification covers four grades of fuel oil made in whole or in part with hydrocarbon-based used or reprocessed lubricating oil or functional fluids, such as preservative and hydraulic fluids. The four grades of fuel are intended for use in various types of fuel-oil-burning industrial equipment under various climatic and operating conditions. These fuels are not intended for use in residential heaters, small commercial boilers, combustion engines, or marine applications,

1.1.1Grades RFO4, RFO5L, RFO5H, and RFO6 are used lubricating oil blends, with or without distillate or residual fuel oil, or both, of increasing viscosity and are intended for use in industrial burners equipped to handle these types of recycled fuels.

Note 1:For information on the significance of the terminology and test methods used in this specification, see Appendix X1.

1.2This specification is for use in contracts for the purchase of fuel oils derived from used lubricating oil and for the guidance of consumers of such fuels. This specification does not address the frequency with which any particular test must be run.

1.3Nothing in this specification shall preclude observance of national or local regulations, which can be more restrictive. In some jurisdictions, used oil is considered a hazardous waste and fuels from used oil are required to meet certain criteria before use as a fuel.

Note 2:For United States federal requirements imposed on used oil generators, transporters and transfer facilities, reprocessors, marketers, and burners, see 40 CFR 279.

Note 3:The generation and dissipation of static electricity can create problems in the handling of distillate burner fuel oils. For more information on the subject, see Guide D4865.

1.4The values stated in SI units are to be regarded as standard; non-SI units, when given, are for information only.

Committee	D 02
DocumentType	Standard
Pages	6
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM D 6448 : 2016 : R2022
Supersedes	ASTM D 6448 : 2014 : EDT 1

ASTM D 6823 : 2008 : R2013	Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils
ASTM D 7666 : 2012	Standard Specification for Triglyceride Burner Fuel
ASTM D 6823 : 2008 : R2021	Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils
ASTM D 7666 : 2012 : R2019	Standard Specification for Triglyceride Burner Fuel

ASTM D 4175 : 2020	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2014	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4057 : 2019	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 2622 : 1992 : EDT 1	Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 4175 : 2009 : REV A : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4865 : 2019	Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM D 4175 : 2008 : REV B : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 1552 : 2003	Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 4057 : 1995	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 2983 : 2019	Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D 4377 : 2000 : EDT 1	Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
ASTM D 2983 : 2002	Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D 473 : 1981 : R1995 : EDT 2	Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
ASTM D 6450 : 2012	Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D 6450 : 2016 : REV A	Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D 2622 : 1987 : EDT 1	Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 3245 : 2003	Standard Test Method for Pumpability of Industrial Fuel Oils (Withdrawn 2010)
ASTM D 4865 : 2009 : R2014	Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM D 2709 : 1996 : R2011 : EDT 1	Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 4175 : 2005	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4980 : 1989 : R2003	Standard Test Methods for Screening of pH in Waste (Withdrawn 2009)
ASTM D 2709 : 1996 : EDT 2	Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 3828 : 2002	Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 2983 : 2017	Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D 4175 : 2005 : EDT 2	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 1298 : 2012 : REV A	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 6822 : 2002	Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D 1796 : 2011	Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D 4177 : 2016 : EDT 1	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 7042 : 2019 : EDT 1	Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 5185 : 1997	Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 4175 : 2015 : REV C	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 1266 : 1998	Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 4175 : 2020 : REV B	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2017 : REV A : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 396 : 2020	Standard Specification for Fuel Oils
ASTM D 4052 : 1996 : R2002 : EDT 1	Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D 3828 : 2012 : REV A	Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 1217 : 2015	Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D 7042 : 2012	Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 2709 : 1996 : R2006	Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 1481 : 2017	Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer (Withdrawn 2023)
ASTM D 3828 : 1998	Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D 1481 : 1991	Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D 1552 : 2008 : R2014	Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 1298 : 2012 : REV B	Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 4865 : 2009	Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM D 2983 : 2002 : REV A	Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D 1250 : 2007	Standard Guide for Use of the Petroleum Measurement Tables
ASTM D 4177 : 1995	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 1217 : 1993 : R1998	Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D 2983 : 2002 : REV B	Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D 4175 : 2008 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2020 : REV A	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4057 : 2012 : R2018	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 1250 : 2019 : EDT 1	Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1
ASTM D 4294 : 2010	Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 4052 : 2018 : REV A	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 3828 : 2007	Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 396 : 1998	Standard Specification for Fuel Oils
ASTM D 4175 : 2017 : REV B	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 6304:2016	Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
ASTM D 4175 : 2009	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 1552 : 1990 : EDT 1	Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 473 : 2007 : R2017 : EDT 1	Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
ASTM D 4377 : 2000	Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
ASTM D 1266 : 2013	Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 3828 : 2016 : REV A : R2021	Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 1250 : 2008 : R2013	Standard Guide for Use of the Petroleum Measurement Tables
ASTM D 6450 : 2012 : EDT 1	Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D 7042 : 2016 : EDT 2	Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 1481 : 1993 : R1997	Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D 2622 : 1998	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 6304 : 2004 : REV A : EDT 1	Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D 1552 : 2016	Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conducitivity Detection (TCD)
ASTM D 5854 : 1996 : R2010	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 240 : 1992 : R1997 : EDT 2	Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
ASTM D 1480 : 2015	Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D 4175 : 2022	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 1217 : 2020	Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D 5185 : 2005	Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 7094 : 2017 : REV A	Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
ASTM D 1480 : 2021	Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D 7042 : 2010	Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 4175 : 2009 : REV A : EDT 4	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 3828 : 2007 : REV A	Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 4175 : 2009 : REV A : EDT 3	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 1298 : 1999 : R2005	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 4052 : 2009	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 4057 : 1981 : EDT 2	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 473 : 2022	Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
ASTM D 7094 : 2016	Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
ASTM D 5185 : 2002	Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 1298 : 2012 : REV B : R2017	Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 1298 : 2012	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 5854 : 2019	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4980 : 1989	Standard Test Methods for Screening of pH in Waste
ASTM D 1552 : 2000	Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 4868 : 2000	Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
ASTM D 1250 : 2004	Standard Guide for Use of the Petroleum Measurement Tables
ASTM D 1266 : 1987	Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 1250 : 1980 : R2002	Standard Guide for Petroleum Measurement Tables
ASTM D 2622 : 2008	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 7042 : 2016 : EDT 1	Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 445 : 2021 : EDT 2	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 4175 : 2018	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 1250 : 2019	Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1
ASTM D 4377 : 2000 : R2006	Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
ASTM D 6304 : 2007	Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration (Withdrawn 2016)
ASTM D 6304 : 2004	Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D 1298 : 1999 : EDT 2	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 5185 : 2018	Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 4175 : 2001 : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2020 : REV B : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 1796 : 2004 : R2009	Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D 5854 : 1996 : R2005	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 1480 : 2002	Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D 2709 : 2016	Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 6822 : 2012 : REV B	Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D 4175 : 2001	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2005 : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4868 : 1990 : R1995 : EDT 1	Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
ASTM D 6304 : 2016 : EDT 1	Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
ASTM D 3245 : 1996	Standard Test Method for Pumpability of Industrial Fuel Oils
ASTM D 7042 : 2020	Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 4175 : 2002	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 5185 : 2013 : EDT 1	Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 93 : 1990 : EDT 1	Standard Test Methods for Flash Point by Pensky-Martens Closed Tester
ASTM D 6450 : 1999	Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D 6304 : 2004 : REV A	Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D 1250 : 1980 : R1997 : EDT 1	Standard Guide for Petroleum Measurement Tables
ASTM D 3828 : 2012	Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 445 : 1988	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)
ASTM D 1298 : 1999	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 6304 : 2004 : EDT 1	Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D 4057 : 2006	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4294 : 2008	Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 1796 : 1997	Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D 1250 : 2008	Standard Guide for Use of the Petroleum Measurement Tables
ASTM D 4175 : 2015	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2002 : REV A : EDT 2	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 1217 : 1993 : R2007	Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D 4177 : 2015	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 7042 : 2011 : REV A	Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 4052 : 2011	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 1481 : 2002	Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D 6304 : 2000	Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D 56 : 2021 : REV A	Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D 4052 : 2016	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 4057 : 2012	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 7042 : 2021	Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 3828 : 2016 : REV A	Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 2983 : 2020	Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D 5185 : 2013	Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 1796 : 1997 : EDT 1	Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D 2622 : 2003	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4294 : 2008 : REV A	Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 7094 : 2012 : EDT 1	Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
ASTM D 4175 : 2009 : REV A : EDT 5	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 6822 : 2012	Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D 1480 : 2007	Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D 4175 : 2016 : REV C	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 1480 : 2012	Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D 4175 : 2015 : REV B	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 6822 : 2012 : REV A	Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D 1480 : 2002 : EDT 1	Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D 56 : 2016 : REV A	Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D 4294 : 2002	Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 4175 : 2015 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 1552 : 2016 : EDT 1	Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
ASTM D 1298 : 1999 : EDT 1	Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 7042 : 2004	Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 1552 : 2007	Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 4868 : 2017	Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels
ASTM D 7094 : 2012	Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
ASTM D 445 : 2019 : REV A	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 4177 : 2022	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 1552 : 1995	Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 4175 : 2009 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 2983 : 2004 : REV A	Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D 4865 : 1998	Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM D 4175 : 2016 : REV B	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 7042 : 2019	Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 4177 : 1995 : R2010	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 1552 : 2015	Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and IR Detection
ASTM D 4175 : 2002 : REV A : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2008	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 1552 : 2001	Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 4175 : 2002 : REV A	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4294 : 2016 : EDT 1	Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 4177 : 1995 : R2000	Standard Practice for Automatic Sampling of Peroleum and Petroleum Products
ASTM D 1552 : 2008 : R2014 : EDT 1	Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 4175 : 2000 : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4868 : 2000 : R2010	Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
ASTM D 4175 : 2016 : REV A	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 6450 : 2005	Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D 5854 : 1996 : R2000	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 7042 : 2012 : REV A	Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 2983 : 2021	Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D 4294 : 2008 : REV A : EDT 1	Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 4052 : 1996	Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D 6450 : 2016 : REV A : R2021	Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D 4294 : 1998	Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 56 : 2021	Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D 3828 : 2005	Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 6450 : 2005 : R2010	Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D 4175 : 2019 : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 6304 : 2003	Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D 2983 : 2015	Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer<rangeref></rangeref >
ASTM D 2709 : 2022	Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 2983 : 2009	Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D 2622 : 2010	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 7042 : 2016 : EDT 3	Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 2983 : 2022	Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D 2709 : 1988	Standard Test Method for Water and Sediment in Distillate Fuels by Centrifuge
ASTM D 396 : 2021	Standard Specification for Fuel Oils
ASTM D 4294 : 2021	Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 5185 : 2009	Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 93 : 2000	Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D 445 : 2001	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
ASTM D 1217 : 2012	Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D 2622 : 2021	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 2983 : 2019 : EDT 1	Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D 396 : 2009	Standard Specification for Fuel Oils
ASTM D 445 : 2021	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 93 : 1985	Standard Test Method for Flash Point by Pensky-Martens Closed Tester
ASTM D 4868 : 2000 : R2005	Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
ASTM D 1796 : 2011 : R2016	Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D 1481 : 2012	Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D 2622 : 2007	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4175 : 2017 : REV A	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 2983 : 2001	Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D 3828 : 2009	Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 2622 : 1994	Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 4057 : 2022	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 6822 : 2002 : R2008	Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D 56 : 2022	Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D 7042 : 2012 : EDT 1	Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 4175 : 2009 : REV A : EDT 2	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 1552 : 2008	Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 2622 : 2005	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4177 : 2016	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 5185 : 2002 : EDT 1	Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 4052 : 2022	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 4294 : 2003	Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM D 7042 : 2021 : REV A	Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 2983 : 2004	Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D 2983 : 2003	Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D 7094 : 2004 : R2009	Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
ASTM D 4177 : 2020	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4177 : 1995 : R2005	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4175 : 2018 : EDT 1	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 1298 : 1985 : R1990 : EDT 1	Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 4175 : 2016	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 56 : 1987	Standard Test Method for Flash Point by Tag Closed Tester
ASTM D 4294 : 2016	Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 1796 : 1997 : R2002	Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D 2983 : 1987 : R1993	Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D 5854 : 2019 : REV A	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 7042 : 2016	Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 5185 : 2002 : EDT 2	Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 1481 : 2002 : R2007	Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D 4052 : 2015	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 1796 : 2004	Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D 1250 : 2008 : R2013 : EDT 1	Standard Guide for Use of the Petroleum Measurement Tables
ASTM D 445 : 2021 : EDT 1	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 4057 : 1995 : R2000	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 1796 : 2011 : EDT 1	Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D 1552 : 2016 : R2021	Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
ASTM D 4175 : 2017	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 1796 : 1983 : R1990 : EDT 1	Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D 93 : 1997	Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D 7094 : 2004	Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
ASTM D 4175 : 2019	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 1266 : 2007	Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 4177 : 2015 : REV A	Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 1480 : 1993 : R1997	Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D 6822 : 2012 : REV B : R2017	Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D 1217 : 1993 : R2003 : EDT 1	Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D 4057 : 2006 : R2011	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4377 : 2000 : R2011	Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration (Withdrawn 2020)
ASTM D 1552 : 1983	Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 4175 : 2015 : REV B : EDT 1	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 3828 : 2016	Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 5854 : 1996 : R2015	Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4052 : 2018	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 1266 : 2018	Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 4294 : 1990 : R1998 : EDT 1	Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 4175 : 2008 : REV B	Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 2622 : 2016	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 7042 : 2014	Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 7094 : 2017	Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
ASTM D 2709 : 1996 : R2001 : EDT 1	Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 2983 : 2016	Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D 3828 : 1997	Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D 6450 : 2016	Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester