• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 6751 : 2019

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
Available format(s)

Hardcopy , PDF

Superseded date

27-08-2020

Language(s)

English

Published date

01-05-2019

This specification covers four grades of biodiesel (B100) for use as a blend component with middle distillate fuels.

1.1This specification covers four grades of biodiesel (B100) for use as a blend component with middle distillate fuels. These grades are described as follows:

1.1.1Grade No. 1-B S15—A special purpose biodiesel blendstock intended for use in middle distillate fuel applications which can be sensitive to the presence of partially reacted glycerides, including those applications requiring good low temperature operability, and also requiring a fuel blend component with 15 ppm sulfur (maximum).

1.1.2Grade No. 1-B S500—A special purpose biodiesel blendstock intended for use in middle distillate fuel applications which can be sensitive to the presence of partially reacted glycerides, including those applications requiring good low temperature operability, and also requiring a fuel blend component with 500 ppm sulfur (maximum).

1.1.3Grade No. 2-B S15—A general purpose biodiesel blendstock intended for use in middle distillate fuel applications that require a fuel blend component with 15 ppm sulfur (maximum).

1.1.4Grade No. 2-B S500—A general purpose biodiesel blendstock intended for use in middle distillate fuel applications that require a fuel blend component with 500 ppm sulfur (maximum).

1.2This specification prescribes the required properties of diesel fuels at the time and place of delivery. The specification requirements may be applied at other points in the production and distribution system when provided by agreement between the purchaser and the supplier.

1.3Nothing in this specification shall preclude observance of federal, state, or local regulations which may be more restrictive.

Note 1:The generation and dissipation of static electricity can create problems in the handling of distillate fuel oils with which biodiesel may be blended. For more information on the subject, see Guide D4865.

1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 02
DocumentType
Standard
Pages
10
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 8149 : 2017 Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants
ASTM D 7042 : 2016 : EDT 3 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 7464 : 2014 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
ASTM D 7464 : 2019 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
ASTM D 4737 : 2010 : R2016 Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 7687 : 2017 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D 7806 : 2012 Standard Test Method for Determination of the Fatty Acid Methyl Ester (FAME) Content of a Blend of Biodiesel and Petroleum-Based Diesel Fuel Oil Using Mid-Infrared Spectroscopy
ASTM D 6469 : 2017 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 2068 : 2017 Standard Test Method for Determining Filter Blocking Tendency
ASTM D 7501 : 2018 : REV A Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
ASTM D 7591 : 2012 : R2017 Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
ASTM D 8183 : 2018 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
ASTM D 396 : 2019 : REV A Standard Specification for Fuel Oils
ASTM D 7619 : 2017 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D 7545 : 2014 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)
ASTM D 7371 : 2014 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
ASTM D 7861 : 2014 : R2019 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
ASTM D 1655 : 2019 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 7398 : 2011 : R2016 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
ASTM D 1655 : 2019 Standard Specification for Aviation Turbine Fuels
ASTM D 8181 : 2019 Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils
ASTM D 7797 : 2018 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
ASTM D 2274 : 2014 : R2019 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 7545 : 2014 : R2019 : EDT 1 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)
ASTM D 7467 : 2019 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 396 : 2019 Standard Specification for Fuel Oils
ASTM D 7963 : 2019 : EDT 1 Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
ASTM D 2274 : 2014 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)

ASTM D 6890 : 2015 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 7397 : 2010 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)
ASTM D 4057 : 2019 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 2622 : 1992 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 6584 : 2008 Standard Test Method for Determination of Free and Total Glycerin in B-100 Biodiesel Methyl Esters By Gas Chromatography
ASTM D 4865 : 2019 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM D 5453 : 2009 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 6469 : 2004 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 2274 : 2010 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 4057 : 1995 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 6450 : 2012 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D 6450 : 2016 : REV A Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D 2622 : 1987 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 4865 : 2009 : R2014 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM D 2709 : 1996 : R2011 : EDT 1 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 5772 : 2004 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
ASTM D 2709 : 1996 : EDT 2 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 1160 : 2012 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM D 3828 : 2002 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 7039 : 2013 Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 3120 : 1996 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 5772 : 2010 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
ASTM D 6890 : 2018 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4951 : 2002 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 4530 : 2003 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM D 1796 : 2011 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D 3120 : 2008 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 4177 : 2016 : EDT 1 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 7668 : 2012 : REV A Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D 5453 : 2008 : REV B Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 5453 : 2000 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 1266 : 1998 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 7501 : 2009 : REV A Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
ASTM D 2274 : 2001 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 6890 : 2003 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 3828 : 2012 : REV A Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 7042 : 2012 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 2709 : 1996 : R2006 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 3828 : 1998 Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D 3117 : 1996 : EDT 1 Standard Test Method for Wax Appearance Point of Distillate Fuels
ASTM D 5453 : 2004 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 6890 : 2006 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4865 : 2009 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM D 4177 : 1995 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4951 : 2000 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 4057 : 2012 : R2018 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 7668 : 2012 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D 5453 : 2012 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 4294 : 2010 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 6584 : 2010 : REV A Standard Test Method for Determination of Total Monoglyceride, Total Diglyceride, Total Triglyceride, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
ASTM D 2500 : 2016 : REV B Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
ASTM D 3828 : 2007 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 7668 : 2014 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D 2880 : 2000 Standard Specification for Gas Turbine Fuel Oils
ASTM D 3242 : 1998 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 7501 : 2009 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
ASTM D 1266 : 2013 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 6450 : 2012 : EDT 1 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D 7042 : 2016 : EDT 2 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 6469 : 2012 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 6584 : 2010 Standard Test Method for Determination of Total Monoglyceride, Total Diglyceride, Total Triglyceride, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
ASTM D 2622 : 1998 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 2500 : 2016 : REV A Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
ASTM D 2274 : 2003 : REV A : R2008 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 7345 : 2017 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
ASTM D 2500 : 2016 Standard Test Method for Cloud Point of Petroleum Products
ASTM D 5772 : 2017 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)
ASTM D 4737 : 2009 Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 7501 : 2018 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
ASTM D 7042 : 2010 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 3828 : 2007 : REV A Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 4057 : 1981 : EDT 2 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 5453 : 2008 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 5772 : 2015 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
ASTM D 2274 : 2014 : R2019 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 6469 : 2008 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 6890 : 2007 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 5771 : 2004 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
ASTM D 2880 : 1990 Standard Specification for Gas Turbine Fuel Oils
ASTM D 5773 : 1995 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D 6890 : 2011 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 1266 : 1987 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 7344 : 2017 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
ASTM D 2622 : 2008 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 7042 : 2016 : EDT 1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 6890 : 2012 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 6584 : 2010 : REV A : EDT 1 Standard Test Method for Determination of Total Monoglyceride, Total Diglyceride, Total Triglyceride, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
ASTM D 1160 : 2013 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM D 5773 : 2015 : REV A Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D 7344 : 2011 : REV A Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
ASTM D 2880 : 2013 Standard Specification for Gas Turbine Fuel Oils
ASTM D 1796 : 2004 : R2009 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D 2274 : 2003 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 5453 : 2005 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 2709 : 2016 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 2500 : 1999 Standard Test Method for Cloud Point of Petroleum Products
ASTM D 2500 : 2002 : EDT 1 Standard Test Method for Cloud Point of Petroleum Products
ASTM D 7344 : 2011 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
ASTM D 7397 : 2017 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Miniaturized Optical Method)
ASTM D 6890 : 2016 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 6890 : 2013 : REV B Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 5773 : 2017 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
ASTM D 2500 : 2005 Standard Test Method for Cloud Point of Petroleum Products
ASTM D 3120 : 2008 : R2019 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 1160 : 2002 : REV A Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM D 6890 : 2010 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 7397 : 2010 : R2016 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)
ASTM D 3242 : 2007 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 2880 : 2013 : REV A Standard Specification for Gas Turbine Fuel Oils
ASTM D 5772 : 1995 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
ASTM D 6450 : 1999 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D 7345 : 2008 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method
ASTM D 5773 : 2004 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D 3828 : 2012 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 7344 : 2017 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
ASTM D 5453 : 2006 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 6890 : 2008 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 2500 : 2002 Standard Test Method for Cloud Point of Petroleum Products
ASTM D 1160 : 2006 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM D 2500 : 2011 Standard Test Method for Cloud Point of Petroleum Products
ASTM D 2880 : 2018 Standard Specification for Gas Turbine Fuel Oils
ASTM D 5771 : 2010 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
ASTM D 1160 : 2018 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM D 2500 : 2009 Standard Test Method for Cloud Point of Petroleum Products
ASTM D 4057 : 2006 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 2880 : 1998 Standard Specification for Gas Turbine Fuel Oils
ASTM D 4294 : 2008 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 5771 : 2017 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)
ASTM D 3242 : 2001 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 1796 : 1997 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D 5773 : 2005 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D 4177 : 2015 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 7042 : 2011 : REV A Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 5773 : 2017 : EDT 1 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
ASTM D 3120 : 2003 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 2500 : 2017 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
ASTM D 5771 : 1995 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
ASTM D 6890 : 2010 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 6469 : 2014 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 4951 : 2006 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 7344 : 2014 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
ASTM D 7397 : 2008 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)
ASTM D 6584 : 2000 Test Method for Determination of Free and Total Glycerine in B-100 Biodiesel Methyl Esters by Gas Chromatography
ASTM D 4057 : 2012 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 3242 : 2008 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 3242 : 2005 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 3828 : 2016 : REV A Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 1160 : 2015 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM D 1796 : 1997 : EDT 1 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D 2880 : 2003 : R2010 Standard Specification for Gas Turbine Fuel Oils
ASTM D 2622 : 2003 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 6890 : 2016 : EDT 1 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4530 : 2000 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM D 5453 : 2016 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 4294 : 2008 : REV A Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 6584 : 2013 : EDT 1 Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
ASTM D 6890 : 2011 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4737 : 2009 : REV A Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 7501 : 2012 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
ASTM D 7689 : 2017 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Mini Method)
ASTM D 5773 : 2003 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D 6890 : 2009 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 6890 : 2011 : REV B Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 7039 : 2015 : REV A Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4294 : 2002 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 7501 : 2012 : REV A : R2017 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
ASTM D 3120 : 2003 : REV A Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 7042 : 2004 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 7039 : 2004 Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4737 : 2010 : R2016 Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 5773 : 2010 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D 6584 : 2000 : EDT 1 Standard Test Method for Determination of Free and Total Glycerin in B-100 Biodiesel Methyl Esters By Gas Chromatography
ASTM D 5453 : 2003 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 2274 : 1994 : R1999 : EDT 1 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 6890 : 2016 : EDT 2 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4865 : 1998 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM D 2500 : 2017 : REV A Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
ASTM D 4177 : 1995 : R2010 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 6890 : 2013 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4737 : 2003 Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 4951 : 2014 : R2019 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 2880 : 2015 Standard Specification for Gas Turbine Fuel Oils
ASTM D 1160 : 2003 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM D 5771 : 2003 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
ASTM D 4294 : 2016 : EDT 1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 5773 : 2007 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D 4177 : 1995 : R2000 Standard Practice for Automatic Sampling of Peroleum and Petroleum Products
ASTM D 5453 : 2016 : EDT 1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 7668 : 2010 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils<char: emdash>Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D 1160 : 1999 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM D 4951 : 2009 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 7039 : 2015 Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 6450 : 2005 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D 7042 : 2012 : REV A Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 7668 : 2014 : REV A Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D 4294 : 2008 : REV A : EDT 1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 4294 : 1998 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 5773 : 2002 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D 3828 : 2005 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 6450 : 2005 : R2010 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D 6217 : 2011 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D 3117 : 2003 Standard Test Method for Wax Appearance Point of Distillate Fuels (Withdrawn 2010)
ASTM D 2622 : 2010 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 7042 : 2016 : EDT 3 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 2709 : 1988 Standard Test Method for Water and Sediment in Distillate Fuels by Centrifuge
ASTM D 6469 : 2017 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 7039 : 2007 Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 7344 : 2008 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
ASTM D 6890 : 2003 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 6469 : 2011 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 7345 : 2007 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method
ASTM D 7501 : 2009 : REV B Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
ASTM D 4737 : 1996 : REV A Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 2880 : 2014 Standard Specification for Gas Turbine Fuel Oils
ASTM D 5772 : 2005 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
ASTM D 6469 : 1999 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 5453 : 2019 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 3120 : 1996 : R2002 : EDT 1 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 1796 : 2011 : R2016 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D 7397 : 2007 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)
ASTM D 2622 : 2007 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 6584 : 2017 Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
ASTM D 7668 : 2017 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D 2274 : 2003 : REV A Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 3120 : 2006 : EDT 1 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 3828 : 2009 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 2622 : 1994 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 3120 : 2006 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 7501 : 2018 : REV A Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
ASTM D 7042 : 2012 : EDT 1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 5771 : 2012 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
ASTM D 2880 : 2013 : REV B Standard Specification for Gas Turbine Fuel Oils
ASTM D 4530 : 2007 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM D 2622 : 2005 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 6890 : 2012 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4177 : 2016 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 7689 : 2011 Standard Test Method for Cloud Point of Petroleum Products (Mini Method)
ASTM D 4294 : 2003 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM D 6890 : 2013 : REV B : EDT 1 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 6890 : 2007 : REV B Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 7345 : 2014 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
ASTM D 4951 : 2014 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 6890 : 2015 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 6469 : 2008 : EDT 1 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 4177 : 1995 : R2005 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4737 : 2004 Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 2880 : 1996 Standard Specification for Gas Turbine Fuel Oils
ASTM D 5453 : 2019 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 5771 : 2005 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
ASTM D 4530 : 2015 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM D 7501 : 2012 : REV A Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
ASTM D 4294 : 2016 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 1796 : 1997 : R2002 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D 4530 : 2006 : EDT 1 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM D 7042 : 2016 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 6890 : 2015 : REV B Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 6584 : 2013 Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
ASTM D 5772 : 2003 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
ASTM D 4530 : 2006 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM D 1796 : 2004 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D 6890 : 2013 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4057 : 1995 : R2000 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 3120 : 2008 : R2014 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 1796 : 2011 : EDT 1 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D 3242 : 2011 : R2017 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 5771 : 2002 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
ASTM D 1796 : 1983 : R1990 : EDT 1 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D 6890 : 2007 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 1266 : 2007 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 4177 : 2015 : REV A Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 6890 : 2004 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 8183 : 2018 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
ASTM D 2274 : 2001 : REV A Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 5772 : 2002 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
ASTM D 7344 : 2007 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
ASTM D 2274 : 2014 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 7345 : 2016 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
ASTM D 4057 : 2006 : R2011 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 1160 : 2002 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM D 5773 : 2015 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D 4530 : 2011 Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM D 2880 : 1978 Standard Specification for Gas Turbine Fuel Oils
ASTM D 5771 : 2015 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
ASTM D 6584 : 2007 Standard Test Method for Determination of Free and Total Glycerin in B-100 Biodiesel Methyl Esters By Gas Chromatography
ASTM D 5453 : 2003 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 6217 : 2010 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D 3828 : 2016 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 4737 : 2010 Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 1266 : 2018 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 4294 : 1990 : R1998 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 2622 : 2016 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 7042 : 2014 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 2880 : 2003 Standard Specification for Gas Turbine Fuel Oils
ASTM D 6217 : 2011 : R2016 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D 2709 : 1996 : R2001 : EDT 1 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 5453 : 2008 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 3242 : 2011 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 3828 : 1997 Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D 5453 : 2000 : EDT 1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 6217 : 1998 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D 2880 : 2014 : REV A Standard Specification for Gas Turbine Fuel Oils
ASTM D 6450 : 2016 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester

View more information
£62.61
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.