• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 6813 : 2002 : REV A : R2013

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps (Withdrawn 2015)
Available format(s)

Hardcopy , PDF

Withdrawn date

03-12-2015

Language(s)

English

Published date

01-05-2013

CONTAINED IN VOL. 05.04, 2015 Describes the establishment of test protocols and methodologies for determining the suitability of fluids for use in fluid power systems that incorporate axial or radial piston pumps.

1.1This guide covers the establishment of test protocols and methodologies for determining the suitability of fluids for use in fluid power systems that incorporate axial or radial piston pumps. The suitability of all fluid types to meet specific levels of performance in piston pumps is addressed. These fluids include, but are not limited to formulations based on mineral, synthetic or vegetable oil base stocks. The finished fluids may be in the form of straight oils, soluble oils or invert emulsions.

1.2The test protocols and methodologies described in this guide have been selected for their ability to distinguish between highly acceptable, acceptable and unacceptable fluid performance in piston pumps. They take into account the broad range of operating conditions piston pumps are subjected to, as well as the common variations in design and materials of construction among pump manufacturers.

1.3This guide is intended to complement proprietary test protocols and methodologies employed by some piston pump manufacturers. The test protocols and methodologies within this guide may help pump manufacturers, fluid formulators and end users accurately screen potential fluids for specific performance characteristics. The results of this screening may be sufficient in certain instances for pump manufacturers to forego requirements for additional fluid performance tests.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Committee
D 02
DocumentType
Guide
Pages
23
ProductNote
Reconfirmed 2013
PublisherName
American Society for Testing and Materials
Status
Withdrawn
Supersedes

ISO 5884:1987 Aerospace Fluid systems and components Methods for system sampling and measuring the solid particle contamination of hydraulic fluids
NFE 48 691 : 1995 HYDRAULIC FLUID POWER - FLUIDS - MEASUREMENT OF FILTERABILITY OF MINERALS OILS IN THE PRESENCE OF WATER
ASTM D 892 : 2013-07 TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS
ASTM D 2879 : 2010-10 TEST METHOD FOR VAPOR PRESSURE-TEMPERATURE RELATIONSHIP AND INITIAL DECOMPOSITION TEMPERATURE OF LIQUIDS BY ISOTENISCOPE
ASTM D 2422 : 1997 Standard Classification of Industrial Fluid Lubricants by Viscosity System
ASTM D 665 : 2014-11 TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF INHIBITED MINERAL OIL IN THE PRESENCE OF WATER
ISO 12922:2012 Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
ASTM D 2882 : 2000 Standard Test Method for Indicating the Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in Constant Volume Vane Pump (Withdrawn 2003)
ASTM D 6547 : 2016 : REDLINE Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple
ASTM D 6595 : 2017 : REDLINE Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
IP 281 : 80(R1988) DETERMINATION OF ANTI WEAR PROPERTIES OF HYDRAULIC FLUIDS - VANE PUMP METHOD
ASTM D 6546 : 2015 : REDLINE Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
SAE J 745 : 2009 HYDRAULIC POWER PUMP TEST PROCEDURE
ASTM E 70 TEST METHOD FOR PH OF AQUEOUS SOLUTIONS WITH THE GLASS ELECTRODE
DIN 51389-2:1982-04 DETERMINATION OF LUBRICANTS; MECHANICAL TESTING OF HYDRAULIC FLUIDS IN THE VANE-CELL-PUMP; METHOD A FOR ANHYDROUS HYDRAULIC FLUIDS
SAE J 1276 : 2014 STANDARDIZED FLUID FOR HYDRAULIC COMPONENT TESTS
ASTM D 1533 : 2012 : REDLINE Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
ISO 13357-2:2017 Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils
ASTM D 2624 : 2015 : REDLINE Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
DIN 51515-1:2010-02 Lubricants and governor fluids for turbines - Minimum requirements - Part 1: Turbine oils TD for normal service
ASTM D 1121 : 2011 : REDLINE Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
DIN 51554-3:1978-09 TESTING OF MINERAL OILS; TEST OF SUSCEPTIBILITY TO AGEING ACCORDING TO BAADER; TESTING AT 95 DEGREE C
ISO 4404:1998 Petroleum and related products Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems
ASTM D 5182 : 1997 : EDT 1 Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
DIN 51389-3:1998-10 DETERMINATION OF LUBRICANTS; MECHANICAL TESTING OF HYDRAULIC FLUIDS IN THE VANE-CELL-PUMP; METHOD B FOR AQUEOUS NOT EASILY INFLAMMABLE HYDRAULIC FLUIDS
ASTM D 93 : 2016-07 TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER
ISO 11171:2016 Hydraulic fluid power Calibration of automatic particle counters for liquids
ASTM D 6006 : 2017 : REDLINE Standard Guide for Assessing Biodegradability of Hydraulic Fluids
DIN 51348:1990-12 TESTING OF FIRE RESISTANT GOVERNOR FLUIDS; DETERMINATION OF HYDROLYTIC STABILITY
NFE 48 692 : 1997 HYDRAULIC FLUID POWER - FLUIDS - MEASUREMENT OF FILTERABILITY OF HFC AND HFD CLASS FIRE RESISTANT FLUIDS
ASTM D 5222 : 2016 : REDLINE Standard Specification for High Fire-Point Mineral Electrical Insulating Oils
ISO 6073:1997 Petroleum products Prediction of the bulk moduli of petroleum fluids used in hydraulic power systems
ASTM D 6158 : 2016-02 SPECIFICATION FOR MINERAL HYDRAULIC OILS
ASTM E 203 : 2016 : REDLINE Standard Test Method for Water Using Volumetric Karl Fischer Titration
ASTM D 3427 : 2015 : REDLINE Standard Test Method for Air Release Properties of Hydrocarbon Based Oils
ISO 14935:1998 Petroleum and related products Determination of wick flame persistence of fire-resistant fluids
ASTM E 659 : 2015 : REDLINE Standard Test Method for Autoignition Temperature of Chemicals
NFE 48 61990 : 1990 HYDRAULIC FLUID POWER - FLUIDS - MEASUREMENT OF FILTERABILITY OF MINERAL OILS
ISO 4021:1992 Hydraulic fluid power — Particulate contamination analysis — Extraction of fluid samples from lines of an operating system
ISO 15029-1:1999 Petroleum and related products Determination of spray ignition characteristics of fire-resistant fluids Part 1: Spray flame persistence Hollow-cone nozzle method
ISO 4402:1991 Hydraulic fluid power — Calibration of automatic-count instruments for particles suspended in liquids — Method using classified AC Fine Test Dust contaminant
ASTM D 943 : 2017-08 TEST METHOD FOR OXIDATION CHARACTERISTICS OF INHIBITED MINERAL OILS
ISO 4407:2002 Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope
ISO 6743-4:2015 Lubricants, industrial oils and related products (class L) Classification Part 4: Family H (Hydraulic systems)

View more information
£90.16
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.