ASTM D 6932/D6932M : 2008 : R2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
18-05-2021
English
14-02-2014
CONTAINED IN VOL. 04.03, 2015 Defines the construction of bituminous open-graded friction course plant mixtures.
1.1This guide covers the construction of bituminous open-graded friction course plant mixtures. End-use specifications should be adopted to conform to job and user requirements. Where applicable, Specification D3666 should be applied as a minimum for agencies testing and inspecting road and paving materials.
1.2Bituminous open-graded friction courses are placed as the final wearing course for highways and airfields.
1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
Committee |
D 04
|
DevelopmentNote |
Supersedes ASTM D 6932. (08/2008)
|
DocumentType |
Guide
|
Pages |
4
|
ProductNote |
Reconfirmed 2013
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
ASTM D 6373 : 2013 | Standard Specification for Performance Graded Asphalt Binder |
ASTM D 6307 : 2019 | Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method |
ASTM D 75 : 2003 | Standard Practice for Sampling Aggregates |
ASTM D 3666 : 2013 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
ASTM D 4791 : 2010 | Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) |
ASTM D 3666 : 2011 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
ASTM D 4791 : 1999 | Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate |
ASTM D 3381 : 2005 | Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction |
ASTM D 6114 : 1997 : R2002 | Standard Specification for Asphalt-Rubber Binder |
ASTM D 3666 : 2007 : REV A | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
ASTM D 6307 : 2004 | Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method |
ASTM C 88 : 2013-08 | TEST METHOD FOR SOUNDNESS OF AGGREGATES BY USE OF SODIUM SULFATE OR MAGNESIUM SULFATE |
ASTM D 2995 : 1999 : R2009 | Standard Practice for Estimating Application Rate of Bituminous Distributors |
ASTM D 5821 : 2013 : R2017 | Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate |
ASTM D 6373 : 1999 | Standard Specification for Performance Graded Asphalt Binder |
ASTM D 6373 : 2016 | Standard Specification for Performance Graded Asphalt Binder |
ASTM C 1252 : 1998 | Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading) |
ASTM D 3666 : 2016 : REDLINE | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
ASTM C 1252 : 2017 | Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading) |
ASTM C 1252 : 2006 | Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading) (Withdrawn 2015) |
ASTM D 4791 : 2005 : EDT 1 | Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate |
ASTM D 3666 : 2009 : REV A | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
ASTM D 6390 : 1999 | Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures |
ASTM D 6390 : 2005 | Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures |
ASTM D 6307 : 1998 | Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method |
ASTM C 127 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate |
ASTM D 1461 : 1985 : R2001 | Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures |
ASTM D 6390 : 2011 : R2017 | Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures |
ASTM D 6114 : 1997 : EDT 1 | Standard Specification for Asphalt-Rubber Binder |
ASTM D 5821 : 2001 | Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate |
ASTM D 5821 : 2001 : R2006 | Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate |
ASTM D 2995 : 2014 : REDLINE | Standard Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors (Withdrawn 2023) |
ASTM D 4791 : 2019 | Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate |
ASTM D 3666 : 2005 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
ASTM D 3666 : 2003 : REV A | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
ASTM C 1252 : 2003 | Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading) |
ASTM D 4791 : 2005 | Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate |
ASTM D 3666 : 2000 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
ASTM C 128 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate |
ASTM D 2419 : 2014 : REDLINE | Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
ASTM D 1461 : 2017 : REDLINE | Standard Test Method for Moisture or Volatile Distillates in Asphalt Mixtures |
ASTM D 3666 : 2007 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
ASTM D 3666 : 2007 : EDT 2 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
ASTM C 136 : 2006 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
ASTM D 2419 : 1995 | Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
ASTM D 3666 : 2016 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
ASTM D 2419 : 2009 | Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
ASTM D 6390 : 2011 | Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures |
ASTM D 7064 : 2004 | Standard Practice for Open-Graded Friction Course (OGFC) Mix Design |
ASTM D 3666 : 2003 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
ASTM D 3381 : 2009 | Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction |
ASTM D 6373 : 2007 : EDT 1 | Standard Specification for Performance Graded Asphalt Binder |
ASTM D 1461 : 1985 : R2006 | Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures |
ASTM D 3666 : 2001 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
ASTM D 6373 : 2015 | Standard Specification for Performance Graded Asphalt Binder |
ASTM D 2995 : 2014 | Standard Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors (Withdrawn 2023) |
ASTM D 6390 : 2005 : R2010 | Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures |
ASTM D 6373 : 2021 | Standard Specification for Performance-Graded Asphalt Binder |
ASTM D 3666 : 2006 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
ASTM D 1461 : 2011 | Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures |
ASTM C 136 : 1996 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
ASTM D 6307 : 2010 | Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method |
ASTM D 6307 : 2005 : R2010 | Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method |
ASTM D 5821 : 2013 | Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate |
ASTM D 2995 : 1999 | Standard Practice for Determining Application Rate of Bituminous Distributors |
ASTM D 3666 : 2004 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
ASTM D 5821 : 1995 | Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate |
ASTM D 1461 : 2017 | Standard Test Method for Moisture or Volatile Distillates in Asphalt Mixtures |
ASTM D 6373 : 2016 : REDLINE | Standard Specification for Performance Graded Asphalt Binder |
ASTM D 6373 : 2007 | Standard Specification for Performance Graded Asphalt Binder |
ASTM D 3381 : 1992 : R1999 | Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction |
ASTM D 2419 : 2002 | Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
ASTM D 3666 : 2005 : REV A | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
ASTM D 2995 : 1999 : R2004 | Standard Practice for Estimating Application Rate of Bituminous Distributors |
ASTM D 6307 : 2005 | Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method |
ASTM D 6307 : 2016 | Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method |
ASTM D 2419 : 2014 | Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
ASTM D 3666 : 2007 : REV A : EDT 1 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
ASTM D 3666 : 2009 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
ASTM D 3666 : 2002 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.