ASTM D 560/D560M : 2016
|
Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
|
ASTM D 7382 : 2020
|
Standard Test Methods for Determination of Maximum Dry Unit Weight of Granular Soils Using a Vibrating Hammer
|
ASTM D 7101 : 2013 : EDT 1
|
Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions (Withdrawn 2022)
|
ASTM D 8151 : 2019 : EDT 1
|
Standard Practice for Obtaining Rainfall Runoff from Unvegetated Rolled and Hydraulic Erosion Control Products (RECPs and HECPs) for Acute Ecotoxicity Testing
|
ASTM D 6913/D6913M : 2017
|
Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
|
ASTM D 5918 : 2013 : EDT 1
|
Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils (Withdrawn 2022)
|
ASTM F 1668 : 2016
|
Standard Guide for Construction Procedures for Buried Plastic Pipe
|
ASTM F 2396 : 2011 : R2019
|
Standard Guide for Construction of High Performance Sand-Based Rootzones for Athletic Fields
|
ASTM E 2277 : 2014(R2019)
|
Standard Guide for Design and Construction of Coal Ash Structural Fills
|
ASTM A 798/A798M : 2017
|
Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
|
ASTM E 2243 : 2013 : R2019
|
Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Re-contouring and Highwall Reclamation
|
ASTM D 653 : 2021
|
Standard Terminology Relating to Soil, Rock, and Contained Fluids
|
ASTM D 6836 : 2016
|
Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge
|
ASTM D 5874 : 2016
|
Standard Test Methods for Determination of the Impact Value (IV) of a Soil
|
ASTM D 5080 : 2020
|
Standard Test Method for Rapid Determination of Percent Compaction
|
ASTM C 1479 : 2016 : R2021
|
Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
|
ASTM D 7100 : 2011 : R2020
|
Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
|
ASTM D 5567 : 1994 : R2018
|
Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
|
ASTM D 7762 : 2018 : EDT 1
|
Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash
|
ASTM D 6088 : 2006 : R2016
|
Standard Practice for Installation of Geocomposite Pavement Drains
|
ASTM D 7380 : 2015
|
Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
|
ASTM B 790/B790M : 2016
|
Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
|
ASTM D 7208 : 2014 : EDT 1
|
Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
|
ASTM D 3839 : 2014 : R2019
|
Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
|
ASTM D 4792/D4792M : 2013 : R2019
|
Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions
|
ASTM D 1557 : 2012 : R2021
|
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>))
|
ASTM D 7243 : 2011 : R2020
|
Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
|
ASTM D 1452/D1452M : 2016
|
Standard Practice for Soil Exploration and Sampling by Auger Borings
|
ASTM D 5084 : 2016 : REV A
|
Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
|
ASTM D 6243/D6243M : 2020
|
Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method
|
ASTM D 6938 : 2017 : REV A : EDT 1
|
Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
|
ASTM D 7830/D7830M : 2014 : R2021 : EDT 1
|
Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
|
ASTM C 1688/C1688M : 2014 : REV A
|
Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete (Withdrawn 2023)
|
ASTM D 6758 : 2018 : EDT 1
|
Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
|
ASTM D 6270 : 2020
|
Standard Practice for Use of Scrap Tires in Civil Engineering Applications
|
ASTM E 2278 : 2013 : R2019
|
Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage
|
ASTM D 559/D559M : 2015
|
Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
|
ASTM G 162 : 2018
|
Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils
|
ASTM D 4914/D4914M : 2016
|
Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
|
ASTM E 2399/E2399M : 2019
|
Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegetative (Green) Roof Systems
|
ASTM D 2167 : 2015
|
Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method (Withdrawn 2024)
|
ASTM D 8167/D8167M : 2018 : REV A
|
Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
|
ASTM C 361 : 2019 : REV A
|
Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
|
ASTM F 2747 : 2019
|
Standard Guide for Construction of Sand-based Rootzones for Golf Putting Greens and Tees
|
ASTM B 788/B788M : 2009 : R2020
|
Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
|
ASTM D 6539 : 2013
|
Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air (Withdrawn 2022)
|
ASTM D 7277 : 2016
|
Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow
|
ASTM D 2937 : 2017 : EDT 2
|
Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
|
ASTM D 2321 : 2020
|
Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
|
ASTM D 6780/D6780M : 2019
|
Standard Test Methods for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR)
|
ASTM D 7351 : 2019
|
Standard Test Method for Determination of Sediment Retention Device (SRD) Effectiveness in Sheet Flow Applications
|
ASTM D 5101 : 2012 : R2017
|
Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems
|
ASTM A 796/A796M : 2021
|
Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
|
ASTM D 6460 : 2019
|
Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
|
ASTM D 5321/D5321M : 2021
|
Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
|
ASTM B 789/B789M : 2016 : R2021
|
Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
|
ASTM D 1633 : 2017
|
Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders
|
ASTM D 4718/D4718M : 2015
|
Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
|
ASTM A 807/A807M : 2019
|
Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
|
ASTM D 5856 : 2015
|
Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter (Withdrawn 2024)
|
ASTM C 1479M : 2016 : R2021
|
Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric) (Withdrawn 2023)
|
ASTM D 1556/D1556M : 2015 : EDT 1
|
Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method (Withdrawn 2024)
|
ASTM D 1079 : 2020
|
Standard Terminology Relating to Roofing and Waterproofing
|
ASTM D 4253 : 2016 : EDT 1
|
Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
|
ASTM D 4647/D4647M : 2013:R2020
|
Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
|
ASTM D 7263 : 2021
|
Standard Test Methods for Laboratory Determination of Density and Unit Weight of Soil Specimens
|
ASTM D 5030/D5030M : 2021
|
Standard Test Methods for Density of In-Place Soil and Rock Materials by the Water Replacement Method in a Test Pit
|
ASTM D 4829 : 2021
|
Standard Test Method for Expansion Index of Soils
|
ASTM D 7765 : 2018 : REV A
|
Standard Practice for Use of Foundry Sand in Structural Fill and Embankments
|
ASTM D 7698 : 2021
|
Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
|
ASTM D 6459 : 2019
|
Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
|