• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 7166 : 2010 : R2015

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels
Available format(s)

Hardcopy , PDF

Superseded date

25-05-2023

Language(s)

English

Published date

03-07-2015

CONTAINED IN VOL. 05.06, 2015 Defines the determination of total sulfur from volatile sulfur-containing compounds in high methane or hydrogen content gaseous fuels using on-line/at-line instrumentation.

1.1This practice is for the determination of total sulfur from volatile sulfur-containing compounds in high methane or hydrogen content gaseous fuels using on-line/at-line instrumentation.

1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 03
DocumentType
Standard Practice
Pages
5
ProductNote
Reconfirmed 2015
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 7493 : 2022 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
ASTM D 7493 : 2014 : R2018 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
ASTM D 7800/D7800M : 2014 Standard Test Method for Determination of Elemental Sulfur in Natural Gas (Withdrawn 2023)
ASTM D 7551 : 2010 : R2015 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence
ASTM D 4084 : 2007 : R2017 Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)

ASTM D 3246 : 2011 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
ASTM D 5453 : 2009 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 6122 : 2021 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D 6667 : 2021 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 6621 : 2000 : R2017 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM D 6299 : 2010 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2013 : EDT 1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 5453 : 2008 : REV B Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 6621 : 2000 : R2006 : EDT 1 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM D 5453 : 2000 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 6122 : 2010 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D 1072 : 2006 : R2012 Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
ASTM D 6667 : 2001 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 6299 : 2017 : REV A Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6920 : 2013 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection (Withdrawn 2018)
ASTM D 6122 : 2020 : REV A Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D 6299 : 2017 : REV B Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3764 : 2013 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D 6299 : 2009 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6122 : 2013 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D 5453 : 2004 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 3246 : 2014 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
ASTM D 5453 : 2012 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 6299 : 2013 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6122 : 2006 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
ASTM D 3764 : 2015 : EDT 1 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D 6299 : 2021 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3609 : 2000 : R2014 Standard Practice for Calibration Techniques Using Permeation Tubes
ASTM D 3764 : 2001 Standard Practice for Validation of Process Stream Analyzer Systems
ASTM D 5504 : 2012 : REDLINE Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 4468 : 1985 : R2015 Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and<brk/> Rateometric Colorimetry
ASTM D 4468 : 1985 : R2000 Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry
ASTM D 5287 : 1997 Standard Practice for Automatic Sampling of Gaseous Fuels
ASTM D 6299 : 2010 : EDT 1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6667 : 2004 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 6299 : 2022 : EDT 1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6920 : 2003 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection
ASTM D 5453 : 2008 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 3764 : 2006 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D 4298 : 2004 : R2010 Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
ASTM D 4298 : 2004 Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
ASTM D 6122 : 2015 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D 3764 : 1992 : R1998 Standard Practice for Validation of Process Stream Analyzer Systems
ASTM D 5503 : 1994 : R2003 Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation
ASTM D 5453 : 2005 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 6122 : 2019 : REV B Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D 1072 : 1990 : R1999 Standard Test Method for Total Sulfur in Fuel Gases
ASTM D 4298 : 2004 : R2014 : EDT 1 Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
ASTM D 3246 : 1981 : R1987 : EDT 1 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
ASTM D 6667 : 2004 : R2010 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 6122 : 2001 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers
ASTM D 6299 : 2000 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2010 : EDT 2 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 5453 : 2006 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 6299 : 2016 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6122 : 2019 : REV A Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D 6122 : 2018 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D 3764 : 2019 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D 6621 : 2000 : R2012 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM D 6299 : 2019 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4298 : 1995 : R1999 Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
ASTM D 6667 : 2010 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 6621 : 2021 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM D 3764 : 2022 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D 6299 : 2000 : REV A Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 1070 : 2003 : R2017 Standard Test Methods for Relative Density of Gaseous Fuels
ASTM D 3609 : 2000 : R2005 Standard Practice for Calibration Techniques Using Permeation Tubes
ASTM D 5504 : 2008 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 1070 : 1985 : R1998 Standard Test Methods for Relative Density of Gaseous Fuels
ASTM D 5453 : 2016 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 6920 : 2007 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection
ASTM D 5287 : 2008 Standard Practice for Automatic Sampling of Gaseous Fuels
ASTM D 1072 : 2006 : R2017 Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
ASTM D 3609 : 2000 : R2010 Standard Practice for Calibration Techniques Using Permeation Tubes
ASTM D 6667 : 2014 : R2019 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 6122 : 2016-02 PRACTICE FOR VALIDATION OF THE PERFORMANCE OF MULTIVARIATE ONLINE, AT-LINE, AND LABORATORY INFRARED SPECTROPHOTOMETER BASED ANALYZER SYSTEMS
ASTM D 1070 : 2003 Standard Test Methods for Relative Density of Gaseous Fuels
ASTM D 3609 : 2022 Standard Practice for Calibration Techniques Using Permeation Tubes
ASTM D 5453 : 2003 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 6621 : 2000 : R2006 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM D 6299 : 2020 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3609 : 2000 Standard Practice for Calibration Techniques Using Permeation Tubes
ASTM D 6299 : 2008 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6667 : 2014 : R2019 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 3764 : 2015 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D 1072 : 2006 Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
ASTM D 5453 : 2016 : EDT 1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 5287 : 2008 : R2015 Standard Practice for Automatic Sampling of Gaseous Fuels (Withdrawn 2024)
ASTM D 6621 : 2000 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM D 6299 : 2002 : EDT 1 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3764 : 2009 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D 6122 : 2019 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D 6667 : 2014 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 3246 : 2015 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry (Withdrawn 2024)
ASTM D 5503 : 1994 : R1999 Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation
ASTM D 5504 : 1998 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 4468 : 1985 : R2011 Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and<br> Rateometric Colorimetry
ASTM D 4468 : 1985 : R2006 Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry
ASTM D 6299 : 2022 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 5503 : 1994 : R2008 Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation (Withdrawn 2017)
ASTM D 5453 : 2019 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 5504 : 2001 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 3246 : 2015 : REDLINE Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
ASTM D 4298 : 2022 Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
ASTM D 5504 : 2001 : R2006 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 6122 : 2006 : EDT 1 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
ASTM D 5504 : 2012 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ISO 7504:2015 Gas analysis Vocabulary
ASTM D 5453 : 2019 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 6122 : 1999 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers
ASTM D 6299 : 2007 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2007 : EDT 1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2020 : REV A Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2017 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3246 : 2005 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
ASTM D 5453 : 2003 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 3246 : 1992 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
ASTM D 6122 : 2022 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D 1070 : 2003 : R2010 Standard Test Methods for Relative Density of Gaseous Fuels
ASTM D 6122 : 2009 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
ASTM D 5453 : 2008 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 3246 : 1996 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
ASTM D 6299 : 2002 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 5453 : 2000 : EDT 1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence

View more information
£62.61
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.