Name: ASTM D 7270 : 2007 : R2013
Brand: ASTM
Price: 62.61 GBP

ASTM D 7270 : 2007 : R2013

Superseded

View Superseded by

Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings

Available format(s)

Hardcopy , PDF

Superseded date

02-07-2021

Language(s)

English

Published date

11-07-2013

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 06.02, 2018 Gives a generic testing procedure to verify the air pollution-prevention characteristics and basic properties of liquid coatings applied to metal, plastic, wood, or composite substrates in a factory/manufacturing environment.

1.1This guide provides a generic testing procedure to verify the air pollution-prevention characteristics and basic properties of liquid coatings applied to metal, plastic, wood, or composite substrates in a factory/manufacturing environment. Thus it may be used to evaluate these liquid coatings to verify their volatile organic compound (VOC) and organic hazardous air pollutant (HAP) content as well as basic performance properties.

1.2This guide is adapted from a procedure used by the US Environmental Protection Agency (EPA) to establish third party verification of the physical properties and performance of coatings that have potential to reduce air emissions. The data from the verification testing is available on the internet at the EPA’s Environmental Technology Verification (ETV) Program website (http://www.epa.gov/etv/centers/center6.html) under the “P2 Innovative Coatings and Coating Equipment Pilot.”

1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Committee	D 01
DocumentType	Guide
Pages	7
ProductNote	Reconfirmed 2013
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM D 7270 : 2007 : R2021
Supersedes	ASTM D 7270 : 2007

ASTM D 3960 : 2005 : R2018	Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D 6695 : 2016 : REDLINE	Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 4017 : 1996 : REV A	Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
ASTM D 6695 : 2003 : REV A	Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 3359 : 2009 : EDT 2	Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D 6886 : 2018	Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography
ASTM D 3363 : 2005 : R2011 : EDT 2	Standard Test Method for Film Hardness by Pencil Test (Withdrawn 2020)
ASTM D 3960 : 2002	Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D 1729 : 2016 : REDLINE	Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D 3960 : 2001	Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D 5767 : 2018	Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces
ASTM D 6438 : 2005	Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
ASTM D 2244 : 2015	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 5402 : 2006	Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
ASTM D 3960 : 2005	Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D 3792 : 2016 : REDLINE	Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
ASTM D 2369 : 1998	Standard Test Method for Volatile Content of Coatings
ASTM D 2244 : 2011	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 4017 : 2002 : R2015	Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
ASTM D 1735 : 1999	Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 1729 : 2016	Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM B 499 : 2009 : R2021 : EDT 1	Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
ASTM D 6695 : 2003 : REV B	Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 3792 : 1991 : EDT 1	Standard Test Method for Water Content of Water-Reducible Paints by Direct Injection into a Gas Chromatography
ASTM D 3960 : 2005 : R2013	Standard Practice for Determining Volatile Organic Compound (VOC)Content of Paints and Related Coatings
ASTM D 2244 : 2009	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 3363 : 2000	Standard Test Method for Film Hardness by Pencil Test
ASTM D 6133 : 2002 : R2014	Standard Test Method for Acetone, <i>p</i>-Chlorobenzotrifluoride, Methyl Acetate or <i>t</i>-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
ASTM D 4017 : 1981 : R1987 : EDT 1	Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
ASTM D 3359 : 1997	Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D 2244 : 2002	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2244 : 2016	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 4060 : 2007	Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D 2794 : 1992	Standard Test Method for Resistence of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 2369 : 1981 : EDT 1	Standard Test Method for Volatile Content of Coatings
ASTM D 6695 : 2001	Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 5767 : 2017-09	TEST METHODS FOR INSTRUMENTAL MEASUREMENT OF DISTINCTNESS-OF-IMAGE GLOSS OF COATING SURFACES
ASTM D 2369 : 2001	Standard Test Method for Volatile Content of Coatings
ASTM D 3363 : 2005	Standard Test Method for Film Hardness by Pencil Test
ASTM D 2244 : 2015 : EDT 1	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 6886 : 2014	Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography
ASTM D 2244 : 2009 : REV B	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 3792 : 2005 : R2009	Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
ASTM D 2244 : 2002 : EDT 1	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2369 : 2010	Standard Test Method for Volatile Content of Coatings
ASTM D 2244 : 2015 : REV A	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 6695 : 2008	Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 6886 : 2012	Standard Test Method for Determination of the Individual Volatile Organic Compounds (VOCs) in Air-Dry Coatings by Gas Chromatography
ASTM D 3792 : 1979 : EDT 2	Standard Test Method for Water Content of Water-Reducible Paints by Direct Injection into a Gas Chromatography
ASTM D 3359 : 2009	Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D 5402 : 2019	Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
ASTM B 499 : 2009 : R2014	Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
ASTM D 1735 : 2014	Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 6133:2002	Standard Test Method for Acetone, <i>p</i>-Chlorobenzotrifluoride, Methyl Acetate or <i>t</i>-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
ASTM D 1729 : 1996 : R2009	Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D 4060 : 2001	Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D 2369 : 2020	Standard Test Method for Volatile Content of Coatings
ASTM D 2244 : 2016 : REDLINE	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 3960 : 1998	Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D 2244 : 2014	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 5767 : 1995 : R1999	Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
ASTM D 4457 : 2002	Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph
ASTM D 1729 : 1996 : R2003	Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D 3359 : 2002	Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D 6438 : 1999	Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
ASTM D 6695 : 2016	Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 3359 : 2009 : EDT 1	Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D 3363 : 2005 : R2011 : EDT 1	Standard Test Method for Film Hardness by Pencil Test
ASTM D 4017 : 2002 : R2008 : EDT 1	Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
ASTM D 2794 : 1993 : R1999 : EDT 1	Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 2244 : 2005	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2369 : 2007	Standard Test Method for Volatile Content of Coatings
ASTM D 2369 : 2010 : EDT 1	Standard Test Method for Volatile Content of Coatings
ASTM D 2794 : 1993 : R2004	Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 6438 : 2005 : R2015	Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
ASTM D 3359 : 2007	Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D 1735 : 2014 : REDLINE	Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 5767 : 1995 : R2004	Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
ASTM D 1735 : 2004	Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 2369 : 1993	Standard Test Method for Volatile Content of Coatings
ASTM D 6133 : 2002 : R2021	Standard Test Method for Acetone, <emph type="ital">p</emph>-Chlorobenzotrifluoride, Methyl Acetate or <emph type="ital">t</emph>-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
ASTM D 6886 : 2003 : R2009	Standard Test Method for Speciation of the Volatile Organic Compounds (VOCs) in Low VOC Content Waterborne Air-Dry Coatings by Gas Chromatograpy
ASTM D 6133 : 2002 : R2008	Standard Test Method for Acetone, <i>p</i>-Chlorobenzotrifluoride, Methyl Acetate or <i>t</i>-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
ASTM D 2244 : 2007	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 4017 : 1990	Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
ASTM D 1735 : 2008	Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 3792 : 2016	Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
ASTM D 4017 : 2002	Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
ASTM D 2794 : 1993	TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT)
ASTM D 3792 : 2005 : R2015	Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
ASTM D 1729 : 1996	Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D 3792 : 2005	Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
ASTM D 4060 : 1995	Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D 6886 : 2014 : EDT 1	Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography
ASTM D 6695 : 2003	Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 2369 : 1995	Standard Test Method for Volatile Content of Coatings
ASTM D 3363 : 2005 : R2011	Standard Test Method for Film Hardness by Pencil Test
ASTM D 2369 : 2004	Standard Test Method for Volatile Content of Coatings
ASTM D 6133 : 2000	Test Method for Acetone, <i>p</i>-Chlorobenzotrifluoride, Methyl Acetate or <i>t</i>-Butyl Acetate Content of Solvent-Reducible and Water-Reducible Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
ASTM D 3359 : 2008	Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D 5767 : 1995 : R2012	Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
ASTM D 2794 : 1993 : R2019	Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 1735 : 2002	Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 3960 : 2004	Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D 2369 : 1990	Standard Test Method for Volatile Content of Coatings
ASTM D 5402 : 2006 : R2011	Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
ASTM D 5402 : 1993 : R1999	Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
ASTM D 2244 : 2009 : REV A	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2369 : 2003	Standard Test Method for Volatile Content of Coatings
ASTM D 2244 : 1993 : R2000	Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
ASTM D 3792 : 1999	Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
ASTM D 522 : 1993 : REV A	Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D 2794 : 1993 : R2010	Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 3359 : 2017	Standard Test Methods for Rating Adhesion by Tape Test
ASTM D 2369 : 2010 : R2015 : EDT 1	Standard Test Method for Volatile Content of Coatings
ASTM D 4457 : 2002 : R2008	Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph
ASTM D 2369 : 1987	Standard Test Method for Volatile Content of Coatings
ASTM D 3359 : 2017 : REDLINE	Standard Test Methods for Rating Adhesion by Tape Test
ASTM D 4060 : 2014	Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D 4457 : 1985 : R1996 : EDT 1	Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph
ASTM D 4457 : 2002 : R2014	Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph (Withdrawn 2019)
ASTM D 4060 : 2010	Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D 2369 : 2001 : EDT 1	Standard Test Method for Volatile Content of Coatings
ASTM D 2369 : 1992	Standard Test Method for Volatile Content of Coatings
ASTM D 4060 : 2019	Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D 5402 : 2015	Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
ASTM D 6438 : 2005 : R2010	Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
ASTM D 6886 : 2003	Standard Test Method for Speciation of the Volatile Organic Compounds (VOCs) in Low VOC Content Waterborne Air-Dry Coatings by Gas Chromatograpy
ASTM D 5767 : 2017	Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces