ASTM D 7450 : 2019
Current
Current
The latest, up-to-date edition.
Standard Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-05-2019
This specification covers test methods and acceptance criteria for determining the acceptability of gear oils for applications that specify a lubricant meeting the performance requirements of API Category GL-5 service.
1.1This specification covers test methods and acceptance criteria for determining the acceptability of gear oils for applications that specify a lubricant meeting the performance requirements of API Category GL-5 service. Lubricants that meet these performance requirements are typically intended for use in automotive axles, particularly those containing hypoid gears, operating under various combinations of high-speed/shock-load and low-speed/high-torque conditions.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
D 02
|
| DocumentType |
Standard
|
| Pages |
5
|
| ProductNote |
THIS STANDARD ALSO REFERES TO : MIL-L-2105C
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
| ASTM D8165 : 2019 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions<br> |
| ASTM D 5704 : 2006 | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 6121 : 2013 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 5704 : 2005 : REV A | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 6121 : 2006 : REV A | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 7038 : 2021 : REV A | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 5704 : 2010 | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 7038 : 2008 : REV A | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 7038 : 2008 | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 5704 : 2000 : REV A | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 6121 : 2019 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 7038 : 2009 : REV A | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 7038 : 2022 : REV A | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 7038 : 2007 : REV A | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 6121 : 2012 : REV B | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 7452 : 2022 | Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading |
| ASTM D 5704 : 2005 : REV B | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 5704 : 2012 | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 7038 : 2023 | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 5704 : 2004 : REV A | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 6121 : 2009 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 6121 : 2012 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 7452 : 2015 | Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading |
| ASTM D 892 : 2018 | Standard Test Method for Foaming Characteristics of Lubricating Oils |
| ASTM D 5704 : 2015 : REV A | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 6121 : 2010 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 6121 : 2015 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 6121 : 2017 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 5704 : 2011 | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 6121 : 2003 | Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 7038 : 2018 | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 6121 : 2014 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 8165 : 2017 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions |
| ASTM D 6121 : 2003 : REV A | Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 6121 : 2008 : REV A | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 8165 : 2021 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions |
| ASTM D 5704 : 2007 | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 5704 : 2013 | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 5704 : 2015 | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 6121 : 2002 | Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 8165 : 2019 : REV A | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions |
| ASTM D 5704 : 2022 | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 5704 : 2016 | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 5704 : 2004 | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 7038 : 2005 | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 7038 : 2018 : REV A | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 7038 : 2017 | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 7038 : 2005 : REV A | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 7452 : 2008 | Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading |
| ASTM D 6121 : 2011 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 5704 : 2017 | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 7038 : 2004 | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 8165 : 2020 : REV A | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions |
| ASTM D 7452 : 2017 | Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading |
| ASTM D 5704 : 2009 | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 7038 : 2019 | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 8165 : 2020 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions |
| ASTM D 8165 : 2021 : EDT 1 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions |
| ASTM D 5704 : 2020 | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 7038 : 2022 | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 6121 : 2000 | Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 6121 : 2008 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 7452 : 2012 | Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading |
| ASTM D 7038 : 2013 | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 8165 : 2022 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions |
| ASTM D 6121 : 2005 | Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 7038 : 2010 | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 6121 : 2015 : REV A | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 7452 : 2024 | Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading |
| ASTM D 6121 : 2012 : REV A | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 7452 : 2009 | Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading |
| ASTM D 7452 : 2016 | Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading |
| ASTM D 6121 : 2001 | Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 130 : 2018 | Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test |
| ASTM D 5704 : 2008 | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 7452 : 2014 | Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading |
| ASTM D 6121 : 2006 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 7038 : 2015 | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 6121 : 2019 : REV A : EDT 1 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 6121 : 2016 : REV A | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 7038 : 2021 | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 7452 : 2010 | Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading |
| ASTM D 7452 : 2009 : REV A | Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading |
| ASTM D 892 : 2023 | Standard Test Method for Foaming Characteristics of Lubricating Oils |
| ASTM D 7452 : 2019 | Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading |
| ASTM D 7038 : 2007 | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 5704 : 2003 | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 892 : 2018 : EDT 1 | Standard Test Method for Foaming Characteristics of Lubricating Oils |
| ASTM D 7452 : 2019 : EDT 1 | Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading |
| ASTM D 6121 : 2005 : REV A | Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 6121 : 2004 | Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 7038 : 2020 | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 6121 : 2016 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 5704 : 2022 : REV A | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 7038 : 2014 | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 6121 : 2008 : REV B | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 7038 : 2006 | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
| ASTM D 5704 : 2014 | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 5704 : 2013 : REV A | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 5704 : 2003 : REV A | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 130 : 2012 | Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test |
| ASTM D 6121 : 2019 : REV A | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
| ASTM D 5704 : 2005 | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
| ASTM D 5704 : 2012 : REV A | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
£52.59
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.