ASTM D 7667 : 2010 : R2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method
Available format(s)
Hardcopy , PDF
Superseded date
04-01-2022
Language(s)
English
Published date
19-02-2021
This test method covers the determination of the corrosiveness to silver by automotive spark-ignition engine fuel (for example, gasoline), as defined by Specification D4814 or similar specifications in other jurisdictions, having a vapor pressure no greater than 124 kPa (18 psi) at 37.8 °C (100 °F) by one of two procedures.
1.1This test method covers the determination of the corrosiveness to silver by automotive spark-ignition engine fuel (for example, gasoline), as defined by Specification D4814 or similar specifications in other jurisdictions, having a vapor pressure no greater than 124 kPa (18 psi) at 37.8 °C (100 °F) by one of two procedures.
1.1.1Procedure A—Involves the use of a pressure vessel.
1.1.2Procedure B—Involves the use of a vented test tube.
1.2The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.
1.3WARNING—Mercury has been designated by many regulatory agencies as a hazardous material that can cause central nervous system, kidney and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury containing products. See the applicable product Material Safety Data Sheet (MSDS) for details and EPA’s website—http://www.epa.gov/mercury/faq.htm—for additional information. Users should be aware that selling mercury and/or mercury containing products into your state or country may be prohibited by law.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
D 02
|
| DocumentType |
Test Method
|
| Pages |
7
|
| ProductNote |
Reconfirmed 2015
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 8076 : 2021 | Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines |
| ASTM D 5798 : 2020 | Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines |
| ASTM D 8011 : 2019 | Standard Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as a Denaturant for Fuel Ethanol |
| ASTM D 8275 : 2021 | Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines |
| ASTM D 4814 : 2021 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 5797 : 2018 | Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines |
| ASTM D 4814 : 2019 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 8076 : 2018 | Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines |
| ASTM D 5797 : 2021 | Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines |
| ASTM D 4814 : 2021 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 8076 : 2021 : REV B | Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines |
| ASTM D 5798 : 2021 | Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines |
| ASTM D 3241 : 2008 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4057 : 2019 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 3241 : 2009 : EDT 1 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 3241 : 2019 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 3241 : 2005 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4057 : 1995 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4814 : 2004 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| IP 227 : 1999 | DETERMINATION OF CORROSIVENESS TO SILVER OF AVIATION TURBINE FUELS - SILVER STRIP METHOD |
| ASTM E 1 : 2014 : REDLINE | Standard Specification for ASTM Liquid-in-Glass Thermometers |
| ASTM D 4814 : 2016 : REV C | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4177 : 2016 : EDT 1 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 3241 : 2001 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4814 : 2014 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2001 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2004 : REV B : EDT 1 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2006 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4814 : 2015 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2000 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4177 : 1995 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 4057 : 2012 : R2018 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 3241 : 2014 : EDT 1 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2011 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2002 : REV A | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 3241 : 2014 : REV A | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 3241 : 2017 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2018 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2020 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4057 : 1981 : EDT 2 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4814 : 2018 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2018 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 1995 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2014 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2009 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2015 : EDT 1 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2016 : REV : EDT 0 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2017 : REV A | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2020 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2012 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2016 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2019 : REV A | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2010 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2003 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2001 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2009 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4814 : 2021 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2008 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2015 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2003 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4057 : 2006 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4177 : 2015 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 4814 : 2020 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2004 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2016 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2010 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2008 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4057 : 2012 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 3241 : 2008 : REV A | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 3241 : 2001 : EDT 1 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4814 : 2009 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2011 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2008 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2002 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2011 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4177 : 1995 : R2010 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 4814 : 2019 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2005 : REV B | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4814 : 2006 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2002 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4814 : 2007 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4177 : 1995 : R2000 | Standard Practice for Automatic Sampling of Peroleum and Petroleum Products |
| ASTM D 3241 : 2015 : EDT 2 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2018 : REV D | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2016 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2006 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2014 : REV B | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 1992 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2014 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2015 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2007 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2009 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2019 : REV B | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2018 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2013 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2002 : REV A : EDT 1 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4814 : 2016 : REV D | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2017 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 1998 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4814 : 2021 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2000 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2013 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2004 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2011 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4177 : 2016 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 3241 : 2005 : REV A | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 3241 : 2013 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4177 : 1995 : R2005 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 4814 : 1993 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2014 : REV B : EDT 1 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2019 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4057 : 1995 : R2000 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4814 : 2014 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2016 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 3241 : 2012 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4177 : 2015 : REV A | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 4814 : 2018 : REV C | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4057 : 2006 : R2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4814 : 2021 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2007 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2013 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2004 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 3241 : 2016 : REV A | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 3241 : 2011 : REV A | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
£62.61
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.