ASTM D 8089 : 2017
Current
The latest, up-to-date edition.
Standard Practice for Accelerated Heat Aging for Floor Covering Adhesives
Hardcopy , PDF
English
15-11-2017
CONTAINED IN VOL. 15.06, 2017 Defines a procedure to determine the physical properties and longevity of the floor covering adhesive and the effect on it following accelerated heat aging.
1.1This practice describes a procedure to determine the physical properties and longevity of the floor covering adhesive and the effect on it following accelerated heat aging.
1.2This practice assists in determining compatibility of adhesive and respective floor covering for long term use.
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
D 14
|
| DocumentType |
Standard Practice
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| ASTM D 7888 : 2018 | Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings |
| ASTM D 1084 : 2016 : R2021 | Standard Test Methods for Viscosity of Adhesives |
| ASTM E 177 : 1990 : REV A : R1996 | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM E 177 : 2014 : REDLINE | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM D 1084 : 2008 | Standard Test Methods for Viscosity of Adhesives |
| ASTM F 2199 : 2009 : R2014 | Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat |
| ASTM D 7799 : 2012 : REV A | Standard Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings |
| ASTM D 6004 : 1996 | Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives |
| ASTM D 1084 : 2016 | Standard Test Methods for Viscosity of Adhesives |
| ASTM D 907 : 2015 | Standard Terminology of Adhesives |
| ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 6862:2011 | Standard Test Method for 90 Degree Peel Resistance of Adhesives |
| ASTM F 2199 : 2018 | Standard Test Method for Determining Dimensional Stability and Curling Properties of Resilient Flooring after Exposure to Heat |
| ASTM D 123 : 2019 | Standard Terminology Relating to Textiles |
| ASTM D 1084 : 2016 : REDLINE | Standard Test Methods for Viscosity of Adhesives |
| ASTM D 6862 : 2003 | Standard Test Method for 90 Degree Peel Resistance of Adhesives |
| ASTM F 2199 : 2002 : R2008 | Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat |
| ASTM D 1337 : 1996 | Standard Test Method for Storage Life of Adhesives by Consistency and Bond Strength |
| ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM F 141 : 2012 : R2020 | Standard Terminology Relating to Resilient Floor Coverings |
| ASTM D 6004 : 2004 | Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives |
| ASTM D 6004 : 2021 | Standard Test Method for Determining Adhesive Shear Strength of Resilient Flooring and Carpet Adhesives |
| ASTM D 907 : 2015 : R2023 | Standard Terminology of Adhesives |
| ASTM D 7888 : 2013 | Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings |
| ASTM D 1337:2010 | Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength |
| ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 6862 : 2004 | Standard Test Method for 90 Degree Peel Resistance of Adhesives |
| ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 7799 : 2012 | Standard Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings |
| ASTM D 1337 : 2010 : R2021 | Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength |
| ASTM D 907 : 2015 : REDLINE | Standard Terminology of Adhesives |
| ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 6004 : 2003 | Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives |
| ASTM D 6004 : 2004 : R2011 | Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives (Withdrawn 2020) |
| ASTM D 123 : 2023 | Standard Terminology Relating to Textiles |
| ASTM D 1084 : 1997 | Standard Test Methods for Viscosity of Adhesives |
| ASTM F 2199 : 2002 | Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat |
| ASTM F 141 : 2023 | Standard Terminology Relating to Resilient Floor Coverings |
| ASTM D 6862 : 2011 : R2021 | Standard Test Method for 90 Degree Peel Resistance of Adhesives |
| ASTM D 123 : 2001 | Standard Terminology Relating to Textiles |
| ASTM D 1337 : 2004 | Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength |
| ASTM F 2199:2009 | Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat |
| ASTM D 7888 : 2018 | Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings |
| ASTM D 7799 : 2012 : REV A : R2021 | Standard Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings |
| ASTM D 1337 : 2010 : R2016 | Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength |
| ASTM D 6862 : 2011 : R2016 | Standard Test Method for 90 Degree Peel Resistance of Adhesives |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.