• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 822/D822M : 2013 : R2018

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
Available format(s)

Hardcopy , PDF

Superseded date

23-12-2023

Language(s)

English

Published date

11-09-2018

1.1This practice covers the selection of test conditions for accelerated exposure testing of coatings and related products in filtered open-flame carbon-arc devices conducted according to Practices G151 and G152. This practice also covers the preparation of test specimens, the test conditions suited for coatings, and the evaluation of test results. Table 1 describes commonly used test conditions.

1.2This practice does not cover enclosed carbon-arc exposures of paints and related coatings, which is described in Practice D5031/D5031M. Another procedure for exposing these products is covered by Practice D3361/D3361M, in which the specimens are subjected to radiation from an unfiltered open-flame carbon arc that produces shorter wavelengths and higher levels of short wavelength radiation than filtered open-flame or enclosed carbon arcs.

1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 01
DocumentType
Standard Practice
Pages
6
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM C 647 : 2019 Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
ASTM C 744 : 2021 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units

ASTM D 1730 : 2009 : R2014 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
ASTM D 2244 : 2021 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM G 141 : 2009 : R2021 Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
ASTM G 141 : 2009 : R2013 Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
ASTM D 2244 : 2015 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2616 : 2019 Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale
ASTM D 2244 : 2023 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 609 : 2017 : R2022 Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
ASTM G 169 : 2001 : R2013 Standard Guide for Application of Basic Statistical Methods to Weathering Tests
ASTM D 1729 : 2016 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM E 1347 : 2006 : R2015 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM D 2244 : 2016 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E 691 : 2020 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 2244 : 2015 : EDT 1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 1186 : 1993 Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base
ASTM D 2244 : 2015 : REV A Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 1730 : 1967 : R1998 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
ASTM D 5870 : 1995 Standard Practice for Calculating Property Retention Index of Plastics
ASTM E 691 : 2019 : EDT 1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 1347 : 1997 Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry
ASTM E 691 : 2023 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 1400 : 1994 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base
ASTM D 3361/D3361M : 2013 : R2018 Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM G 152 : 2013 : R2021 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM D 4214 : 2023 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
ASTM E 691 : 2022 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 4214 : 1998 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films (Withdrawn 2007)
ASTM E 691 : 2009 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 4214 : 2007 : R2015 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
ASTM D 5870 : 2022 Standard Practice for Calculating Property Retention Index of Plastics
ASTM G 169 : 2001 : R2021 Standard Guide for Application of Basic Statistical Methods to Weathering Tests
ASTM D 2616 : 1996 Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale
ASTM E 691 : 2021 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 823 : 2018 Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
ASTM G 152 : 2013 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM D 2244 : 2022 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 1729 : 1996 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D 1729 : 2022 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM G 113 : 2016 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM D 609 : 2017 Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
ASTM D 2244 : 1993 : R2000 Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
ASTM D 659 : 1986 : EDT 1 Method of Evaluating Degree of Chalking of Exterior Paints
ASTM D 823 : 2018 : R2022 Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
ASTM D 1005 : 1995 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM D 3361/D3361M : 2022 Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM G 113 : 2022 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM D 5870 : 2016 Standard Practice for Calculating Property Retention Index of Plastics

View more information
£62.61
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.