• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 8337/D8337M : 2021

Current
Current

The latest, up-to-date edition.

Standard Test Method for Evaluation of Bond Properties of FRP Composite Applied to Concrete Substrate using Single-Lap Shear Test
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

14-05-2021

1.1This test method describes the apparatus and procedure to evaluate the lap shear bond properties of wet lay-up or shop-fabricated (for example, pultruded) fiber-reinforced polymer (FRP) composite systems adhesively applied to a flat concrete substrate. The test determines the plateau force that an FRP system can bear before complete debonding from a concrete prism tested using a direct single-lap shear test. This plateau force is reported as bond capacity and may be different from the maximum applied force. The plateau force is then used to determine the interfacial fracture energy and the cohesive material law.

1.2This test method is not intended for job approval or for product qualification purposes unless an external agency adopts the test method for those purposes.

1.3This test method is intended for use with adhesive-applied or wet lay-up FRP systems and is appropriate for use with FRP systems having any fiber orientation or combination of ply orientations comprising the FRP composite, although the test condition only considers forces in the direction parallel to the prism longitudinal axis.

1.4Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.

1.4.1Within the text, the inch-pound units are shown in brackets.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 30
DocumentType
Test Method
Pages
14
PublisherName
American Society for Testing and Materials
Status
Current

ASTM C 511 : 2021 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
ASTM C 125 : 2021 Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM D 883 : 2023 Standard Terminology Relating to Plastics
ASTM C 617/C617M : 2015 Standard Practice for Capping Cylindrical Concrete Specimens
ASTM C 31/C31M : 2024 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 31/C31M : 2019 : REV A Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 33/C33M : 2023 Standard Specification for Concrete Aggregates
ASTM C 31/C31M : 2022 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 31/C31M : 2021 : REV A Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM D 883 : 2024 Standard Terminology Relating to Plastics
ASTM D 3878 : 2023 Standard Terminology for Composite Materials
ASTM E 456 : 2013 : REV A : R2022 Standard Terminology Relating to Quality and Statistics
ASTM C 33/C33M : 2018 Standard Specification for Concrete Aggregates
ASTM C 39/C39M : 2021 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 39/C39M : 2023 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM D 883 : 2022 Standard Terminology Relating to Plastics
ASTM D 883 : 2020 : REV B Standard Terminology Relating to Plastics
ASTM C 31/C31M : 2023 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 125 : 2000 Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM E 456 : 2013 : REV A : R2017 : EDT 5 Standard Terminology Relating to Quality and Statistics
ASTM E 122 : 2017 : R2022 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
ASTM E 122 : 2017 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
ASTM C 39/C39M : 2015 : REV A Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 511 : 2019 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
ASTM C 150/C150M : 2021 Standard Specification for Portland Cement
ASTM C 617/C617M : 2023 Standard Practice for Capping Cylindrical Concrete Specimens
ASTM C 39/C39M : 2020 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM D 3878 : 2020 : REV B Standard Terminology for Composite Materials
ASTM C 31/C31M : 2021 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM E 6 : 2023 : REV A Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 4 : 2021 Standard Practices for Force Calibration and Verification of Testing Machines
ASTM C 125 : 2021 : REV A Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 31/C31M : 2017 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 31/C31M : 2015 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 39/C39M : 2018 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM E 6 : 2015 : EDT 4 : REDLINE Standard Terminology Relating to Methods of Mechanical Testing
ASTM C 31/C31M : 2019 Standard Practice for Making and Curing Concrete Test Specimens in the Field
ASTM C 150/C150M : 2020 Standard Specification for Portland Cement
ASTM C 125 : 2020 Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM E 6 : 2015 : EDT 4 Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 6 : 2023 Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 456 : 2013 : REV A : R2017 : EDT 6 Standard Terminology Relating to Quality and Statistics
ASTM C 150/C150M : 2022 Standard Specification for Portland Cement

View more information
£57.60
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.