• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 86 : 2019

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
Available format(s)

Hardcopy , PDF

Superseded date

12-05-2023

Language(s)

English

Published date

06-01-2020

1.1This test method covers the atmospheric distillation of petroleum products and liquid fuels using a laboratory batch distillation unit to determine quantitatively the boiling range characteristics of such products as light and middle distillates, automotive spark-ignition engine fuels with or without oxygenates (see Note 1), aviation gasolines, aviation turbine fuels, diesel fuels, biodiesel blends up to 20 %, marine fuels, special petroleum spirits, naphthas, white spirits, kerosines, and Grades 1 and 2 burner fuels.

Note 1:An interlaboratory study was conducted in 2008 involving 11 different laboratories submitting 15 data sets and 15 different samples of ethanol-fuel blends containing 25 % volume, 50 % volume, and 75 % volume ethanol. The results indicate that the repeatability limits of these samples are comparable or within the published repeatability of the method (with the exception of FBP of 75 % ethanol-fuel blends). On this basis, it can be concluded that Test Method D86 is applicable to ethanol-fuel blends such as Ed75 and Ed85 (Specification D5798) or other ethanol-fuel blends with greater than 10 % volume ethanol. See ASTM RR:D02-1694 for supporting data.2

1.2The test method is designed for the analysis of distillate fuels; it is not applicable to products containing appreciable quantities of residual material.

1.3This test method covers both manual and automated instruments.

1.4Unless otherwise noted, the values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information only.

1.5WARNING—Mercury has been designated by many regulatory agencies as a hazardous substance that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials. Use Caution when handling mercury and mercury-containing products. See the applicable product Safety Data Sheet (SDS) for additional information. The potential exists that selling mercury or mercury-containing products, or both, is prohibited by local or national law. Users must determine legality of sales in their location.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 02
DocumentType
Test Method
Pages
29
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 244 : 2009 : R2017 Standard Test Methods and Practices for Emulsified Asphalts
ASTM D 2890 : 1992 : R2018 Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels
ASTM D 2887 : 2022 : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 6122 : 2022 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D 268 : 2022 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
ASTM D 8340 : 2022 Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
ASTM D 7798 : 2020 Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538 °C by Ultra Fast Gas Chromatography (UF GC)
ASTM D 396 : 2021 Standard Specification for Fuel Oils
ASTM D 233 : 2013 : R2022 Standard Test Methods of Sampling and Testing Turpentine
ASTM D 8011 : 2019 Standard Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as a Denaturant for Fuel Ethanol
ASTM D 7547 : 2021 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
ASTM D 7223 : 2021 Standard Specification for Aviation Certification Turbine Fuel
ASTM D 8275 : 2022 Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines
ASTM D 7344 : 2017 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
ASTM D 7467 : 2020 : REV A Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 8291 : 2021 : REV A : EDT 1 Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engine
ASTM D 3735 : 2022 Standard Specification for VM&P Naphthas
ASTM D 7500 : 2015 : R2019 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography
ASTM D 8150 : 2022 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
ASTM D 4806 : 2021 : REV A Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 5797 : 2021 Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines
ASTM D 4057 : 2022 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 524 : 2015 : R2019 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
ASTM D 5966 : 2022 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine
ASTM E 3050 : 2022 Standard Specification for Denatured Ethanol for Use as Cooking and Appliance Fuel
ASTM D 8274 : 2020 : REV A Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer
ASTM D 1093 : 2011 : R2017 Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues
ASTM D 8076 : 2021 : REV B Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
ASTM D 6709 : 2022 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
ASTM D 3343 : 2022 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
ASTM D 4929 : 2022 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM F 715 : 2007 : R2018 Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage
ASTM D 910 : 2021 Standard Specification for Leaded Aviation Gasolines
ASTM D 5798 : 2021 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 6618 : 2016 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine
ASTM D 1133 : 2013 : R2021 Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents
ASTM D 7096 : 2019 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
ASTM D 7960 : 2021 Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components
ASTM D 7468 : 2022 Standard Test Method for Cummins ISM Test
ASTM D 7484 : 2023 Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
ASTM D 7213 : 2015 : R2019 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
ASTM D 6923 : 2018 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure
ASTM D 8149 : 2020 Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants
ASTM D 8226 : 2021 : REV A : EDT 1 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine<rangeref></rangeref >
ASTM D 4625 : 2021 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)
ASTM D 6984 : 2018 : EDT 1 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
ASTM D 4737 : 2021 Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 6750 : 2019 : EDT 1 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
ASTM D 3699 : 2019 Standard Specification for Kerosine
ASTM D 8048 : 2021 : REV A : EDT 1 Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine
ASTM D 7156 : 2019 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
ASTM D 7719 : 2021 : REV A Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline Test Fuel
ASTM D 5580 : 2021 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, <emph type="ital"> p/m</emph>-Xylene, <emph type="ital">o</emph>-Xylene, C<inf>9</inf> and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
ASTM D 8350 : 2022 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine
ASTM D 8114 : 2022 : REV A Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition
ASTM D 235 : 2022 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
ASTM D 4054 : 2022 Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives
ASTM D 976 : 2021 : EDT 1 Standard Test Method for Calculated Cetane Index of Distillate Fuels
ASTM D 3734 : 2005 : R2018 Standard Specification for High-Flash Aromatic Naphthas
ASTM D 3338/D3338M : 2020 : REV A Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 5372 : 2020 Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids
ASTM E 1405 : 1998 : R2022 Standard Specification for Laboratory Glass Distillation Flasks
ASTM D 7593 : 2022 Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography
ASTM D 4814 : 2022 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2022 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 5399 : 2009 : R2017 Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
ASTM D 7398 : 2021 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
ASTM D 8111 : 2023 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine
ASTM D 3257 : 2022 Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography
ASTM D 1078 : 2011 : R2019 Standard Test Method for Distillation Range of Volatile Organic Liquids
ASTM D 8147 : 2017 Standard Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines
ASTM E 133 : 1992 : R2022 Standard Specification for Distillation Equipment
ASTM D 1159 : 2007 : R2017 Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration
ASTM D 7422 : 2022 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
ASTM D 8074 : 2022 Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
ASTM D 7826 : 2022 Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
ASTM D 7345 : 2017 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
ASTM D 7807 : 2020 Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection
ASTM D 6352 : 2019 : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography
ASTM D 7589 : 2016 : EDT 1 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine<rangeref></rangeref >
ASTM D 7566 : 2022 : REV A Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 6593 : 2018 : EDT 1 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 5967 : 2021 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 7455 : 2019 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
ASTM D 7665 : 2022 Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids
ASTM E 769 : 2022 Standard Test Methods for Odor of Methanol, Ethanol, <emph type="ital">n</emph>-Propanol, and Isopropanol
ASTM D 7583 : 2016 Standard Test Method for John Deere Coolant Cavitation Test
ASTM D 2889 : 1995 : R2019 Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
ASTM D 7451 : 2021 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark-Ignition Engine Fuels
ASTM D 2425 : 2021 Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
ASTM D 7320 : 2018 : EDT 1 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
ASTM D 8434 : 2021 Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Organo-metallic Additive
ASTM D 7549 : 2021 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure
ASTM D 6681 : 2017 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure
ASTM D 6615 : 2022 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 975 : 2022 : REV A Standard Specification for Diesel Fuel
ASTM D 8369 : 2021 Standard Test Method for Detailed Hydrocarbon Analysis by High Resolution Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy (GC-VUV)
ASTM D 8256 : 2022 : REV A Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 7808 : 2022 Standard Practice for Determining the Site Precision of a Process Stream Analyzer on Process Stream Material
ASTM D 6227 : 2018 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
ASTM D 1319 : 2020 : REV A Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 6560 : 2022 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products

ASTM D 4175 : 2020 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 5950 : 2014 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
ASTM D 5798 : 2020 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4175 : 2020 : REV A Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4953 : 2015 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
ASTM D 6300 : 2019 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 6300 : 2020 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 5950 : 2014 : R2020 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
ASTM D 5985 : 2002 : R2014 Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
ASTM D 4175 : 2019 : EDT 1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 5985 : 2002 : R2020 Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
ASTM D 5191 : 2019 Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)
ASTM D 5191 : 2020 Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)
ASTM D 4953 : 2020 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
ASTM D 5798 : 2019 : REV B Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines

View more information
£90.16
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.