• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 882 : 2018

Current
Current

The latest, up-to-date edition.

Standard Test Method for Tensile Properties of Thin Plastic Sheeting
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

15-08-2018

1.1This test method covers the determination of tensile properties of plastics in the form of thin sheeting and films (less than 1.0 mm (0.04 in.) in thickness).

1.1This test method covers the determination of tensile properties of plastics in the form of thin sheeting and films (less than 1.0 mm (0.04 in.) in thickness).

Note 1:Film is defined in Terminology D883 as an optional term for sheeting having a nominal thickness no greater than 0.25 mm (0.010 in.).

Note 2:Tensile properties of plastics 1.0 mm (0.04 in.) or greater in thickness shall be determined according to Test Method D638.

1.2This test method can be used to test all plastics within the thickness range described and the capacity of the machine employed.

1.3Specimen extension can be measured by grip separation, extension indicators, or displacement of gage marks.

1.4The procedure for determining the tensile modulus of elasticity is included at one strain rate.

Note 3:The modulus determination is generally based on the use of grip separation as a measure of extension; however, the desirability of using extensometers, as described in 6.2, is recognized and provision for the use of such instrumentation is incorporated in the procedure.

1.5Test data obtained by this test method is relevant and appropriate for use in engineering design.

1.6The values stated in SI units are to be regarded as the standard. The values in parentheses are provided for information only.

1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

Note 4:This test method is similar to ISO 527-3, but is not considered technically equivalent. ISO 527-3 allows for additional specimen configurations, specifies different test speeds, and requires an extensometer or gage marks on the specimen.

1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 20
DocumentType
Test Method
Pages
12
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM D 883 : 2023 Standard Terminology Relating to Plastics
ASTM D 6287 : 2005 Standard Practice for Cutting Film and Sheeting Test Specimens
ASTM D 6988 : 2008 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
ASTM D 5947 : 1996 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D 4000 : 2013 Standard Classification System for Specifying Plastic Materials
ASTM D 4000 : 2003 : REV A Standard Classification System for Specifying Plastic Materials
ASTM D 6988 : 2021 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
ASTM D 4000 : 2000 : REV A Standard Classification System for Specifying Plastic Materials
ASTM D 5947 : 2002 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D 883 : 2024 Standard Terminology Relating to Plastics
ASTM D 4000 : 2012 Standard Classification System for Specifying Plastic Materials
ASTM D 4000 : 2009 Standard Classification System for Specifying Plastic Materials
ASTM D 4000 : 2011 Standard Classification System for Specifying Plastic Materials
ASTM E 2935 : 2017 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM D 883 : 2022 Standard Terminology Relating to Plastics
ASTM D 6988 : 2003 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
ASTM D 883 : 2020 : REV B Standard Terminology Relating to Plastics
ASTM E 2935 : 2014 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM D 5947 : 2011 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D 5947 : 2018 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM E 691 : 2020 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 2935 : 2013 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM D 4000 : 2004 : EDT 1 Standard Classification System for Specifying Plastic Materials
ASTM D 4000 : 2023 Standard Classification System for Specifying Plastic Materials
ASTM E 691 : 2019 : EDT 1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2023 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 4000 : 2009 : REV B Standard Classification System for Specifying Plastic Materials
ASTM D 4000 : 2000 Standard Classification System for Specifying Plastic Materials
ASTM D 5947 : 2006 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D 4000 : 2010 : REV A Standard Classification System for Specifying Plastic Materials
ASTM E 2935 : 2020 Standard Practice for Conducting Equivalence Tests for Comparing Testing Processes
ASTM D 6287 : 2017 Standard Practice for Cutting Film and Sheeting Test Specimens
ASTM D 4000 : 2007 Standard Classification System for Specifying Plastic Materials
ASTM D 4000 : 2009 : REV A Standard Classification System for Specifying Plastic Materials
ASTM D 6988 : 2007 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
ASTM E 691 : 2022 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 4000 : 2001 Standard Classification System for Specifying Plastic Materials
ASTM E 691 : 2009 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 2935 : 2020 : EDT 1 Standard Practice for Conducting Equivalence Tests for Comparing Testing Processes
ASTM D 4000 : 2008 Standard Classification System for Specifying Plastic Materials
ASTM D 618 : 2013 Standard Practice for Conditioning Plastics for Testing
ASTM E 4 : 2021 Standard Practices for Force Calibration and Verification of Testing Machines
ASTM E 691 : 2021 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 6287 : 1998 Standard Practice for Cutting Film and Sheeting Test Specimens
ASTM D 5947 : 2003 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D 4000 : 2001 : REV A : EDT 1 Standard Classification System for Specifying Plastic Materials
ASTM D 5947 : 2001 : EDT 1 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D 4000 : 2004 Standard Classification System for Specifying Plastic Materials
ASTM E 2935 : 2016 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM D 6988 : 2013 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
ASTM D 4000 : 2010 Standard Classification System for Specifying Plastic Materials
ASTM E 2935 : 2021 Standard Practice for Evaluating Equivalence of Two Testing Processes
ASTM D 6287 : 2009 Standard Practice for Cutting Film and Sheeting Test Specimens
ASTM E 2935 : 2015 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM D 4000 : 2003 Standard Classification System for Specifying Plastic Materials
ASTM D 4000 : 2020 Standard Classification System for Specifying Plastic Materials
ASTM D 618 : 2021 Standard Practice for Conditioning Plastics for Testing
ASTM D 638 : 2022 Standard Test Method for Tensile Properties of Plastics

View more information
£57.60
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.