|
ASTM D 1184 : 1998 : R2004
|
Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies |
|
ASTM D 1828 : 2001 : R2007
|
Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures |
|
ASTM F 826 : 1994 : R2010
|
Standard Specification for Tops, Furniture, Marine, Steel |
|
ASTM D 5040 : 1990 : R2016
|
Standard Test Methods for Ash Content of Adhesives |
|
ASTM D 4680 : 1998 : R2004
|
Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
|
ASTM D 1583 : 2001 : R2008
|
Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
|
ASTM D 1828 : 2001
|
Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures |
|
ASTM D 3434 : 2000 : R2006
|
Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
|
ASTM D 5215 : 1993 : R2012
|
Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives |
|
ASTM F 2255 : 2005 : R2015
|
Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading |
|
ASTM D 2308 : 2007
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 2834 : 1995
|
Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes |
|
ASTM D 3632 : 1998 : R2019
|
Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
|
ANSI INCITS 322 : 2015
|
INFORMATION TECHNOLOGY - CARD DURABILITY TEST METHODS |
|
ASTM D 2295 : 1996 : R2008
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 4649 : 2003
|
Standard Guide for Selection and Use of Stretch Wrap Films |
|
ASTM D 1582 : 1998 : R2017
|
Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives |
|
ASTM D 5041 : 1998 : R2004
|
Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints |
|
ASTM D 1579 : 2001 : R2013
|
Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives |
|
ASTM D 7998 : 2015
|
Standard Test Method for Measuring the Effect of Temperature on the Cohesive Strength Development of Adhesives using Lap Shear Bonds under Tensile Loading |
|
ASTM D 5572 : 1995 : R1999
|
Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products |
|
ASTM D 1144 : 1999 : R2016
|
Standard Practice for Determining Strength Development of Adhesive Bonds |
|
ASTM D 1579 : 2001 : R2018
|
Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives |
|
ASTM D 2294 : 1996 : R2016
|
Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
|
ASTM D 2339 : 1998 : R2011
|
Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading |
|
ASTM D 1879 : 2006 : R2014
|
Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation |
|
ASTM D 3658 : 2001 : R2016
|
Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints |
|
ASTM D 4300 : 2001
|
Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
|
ASTM D 897 : 2008 : R2016
|
Standard Test Method for Tensile Properties of Adhesive Bonds |
|
ASTM D 3069 : 1994 : R1999 : EDT 1
|
Standard Test Method for Delivery Rate of Aerosol Products |
|
ASTM D 4800 : 1994 : R2011
|
Standard Guide for Classifying and Specifying Adhesives |
|
ASTM D 1828 : 2001 : EDT 1
|
Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures |
|
ASTM D 2293 : 1996
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 2095 : 1996 : R2008
|
Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens |
|
ASTM D 905 : 2008 : R2013
|
Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading |
|
ASTM D 1488 : 2000 : R2018
|
Standard Test Method for Amylaceous Matter in Adhesives |
|
ASTM D 2303 : 1997 : R2004
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 1084 : 2016 : REDLINE
|
Standard Test Methods for Viscosity of Adhesives |
|
ASTM D 1338 : 1999 : R2011
|
Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength |
|
ASTM D 1781 : 1998 : R2004
|
Standard Test Method for Climbing Drum Peel for Adhesives |
|
ASTM D 3023 : 1998 : R2011
|
Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents |
|
ASTM D 6463 : 1999
|
Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading |
|
ASTM D 6412/D6412M : 1999 : R2012
|
Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials |
|
ASTM D 2557 : 1998
|
Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55°C (-450 to -67°F) |
|
ASTM D 2318 : 1998 : R2008
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 2294 : 1996 : R2002
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 3535 : 2007 : REV A
|
Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions |
|
ASTM D 4027 : 1998 : R2019
|
Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
|
ASTM D 2300 : 2008
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 3163 : 2001
|
Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading |
|
ASTM D 6412/D6412M:1999
|
Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials |
|
ASTM D 5751 : 1999 : R2005
|
Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products |
|
CSA O112.9 : 2010 : R2014
|
EVALUATION OF ADHESIVES FOR STRUCTURAL WOOD PRODUCTS (EXTERIOR EXPOSURE) |
|
ASTM D 5267 : 1997
|
Standard Test Method for Determination of Extrudability of Cartridge Adhesives |
|
ASTM D 2339 : 1998 : R2017
|
Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading |
|
ASTM D 3535 : 2007
|
Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions |
|
CSA O112.9 : 2010(R2019)
|
EVALUATION OF ADHESIVES FOR STRUCTURAL WOOD PRODUCTS (EXTERIOR EXPOSURE) |
|
ASTM D 5648 : 2001 : R2008
|
Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity) |
|
ASTM D 5267 : 1997 : R2005
|
Standard Test Method for Determination of Extrudability of Cartridge Adhesives |
|
ASTM D 2295 : 1996 : R2016
|
Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal) |
|
ASTM D 4499 : 2007
|
Standard Test Method for Heat Stability of Hot-Melt Adhesives |
|
ASTM D 2919 : 2001
|
Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
|
ASTM D 1779 : 1998 : R2017
|
Standard Specification for Adhesive for Acoustical Materials |
|
ASTM D 3933 : 1998
|
Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing) |
|
ASTM D 3658 : 2001 : R2008
|
Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints |
|
ASTM F 824 : 1993 : R1999
|
Standard Specification for Tables, Mess, Marine, Steel |
|
AASHTO MP 22 : 2013 : R2015
|
SPECIFICATION FOR FIBER-REINFORCED POLYMER COMPOSITE MATERIALS FOR HIGHWAY AND BRIDGE STRUCTURES |
|
ASTM D 9 : 2012 : REDLINE
|
Standard Terminology Relating to Wood and Wood-Based Products |
|
ASTM D 5824 : 1998 : R2017
|
Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
|
ASTM D 6005 : 2003
|
Standard Test Method for Determining Slump Resistance of Carpet Adhesives |
|
ASTM D 1144 : 1999 : R2005
|
Standard Practice for Determining Strength Development of Adhesive Bonds |
|
ASTM D 3930 : 2008
|
Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes |
|
ASTM D 5267 : 1997 : R2017
|
Standard Test Method for Determination of Extrudability of Cartridge Adhesives |
|
ASTM D 4501 : 2001
|
Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method |
|
ASTM D 1489 : 2009
|
Standard Test Method for Nonvolatile Content of Aqueous Adhesives |
|
ASTM D 4499 : 2007 : R2015
|
Standard Test Method for Heat Stability of Hot-Melt Adhesives (Withdrawn 2021) |
|
ASTM D 1582 : 1998 : R2004
|
Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives |
|
ASTM D 899 : 2000
|
Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive |
|
ASTM D 1490 : 2001 : R2013
|
Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions |
|
ASTM D 6465 : 1999
|
Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
|
ASTM D 2557 : 1998 : R2004
|
Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55°C (-450 to -67°F) |
|
ASTM D 3089 : 1997 : R2008
|
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
|
ASTM D 905 : 2008
|
Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading |
|
ASTM D 6004 : 2004 : R2011
|
Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives (Withdrawn 2020) |
|
ASTM D 2919 : 2001 : R2007
|
Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
|
ASTM D 3807 : 1998 : R2004
|
Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics) |
|
ASTM D 5656 : 2010 : R2017
|
Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading |
|
ASTM D 2651 : 2001 : R2008
|
Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding |
|
ASTM D 2557 : 1998 : R2017
|
Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from −267.8 to −55°C (−450 to −67°F) |
|
ASTM D 3933 : 1998 : R2010
|
Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing) |
|
ASTM D 3434 : 2000
|
Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
|
ASTM D 6005 : 2003 : R2017
|
Standard Test Method for Determining Slump Resistance of Carpet Adhesives (Withdrawn 2017) |
|
ASTM D 2835 : 1989 : R2007
|
Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements |
|
ASTM F 825 : 1993 : R2004
|
Standard Specification for Drawers, Furniture, Marine, Steel |
|
ASTM D 3164M : 2003
|
Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading (Withdrawn 2012) |
|
ASTM D 4896 : 2001 : R2008 : EDT 1
|
Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results |
|
ASTM D 4688 : 1999 : R2005
|
Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber |
|
ASTM D 1579 : 2001
|
Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives |
|
ASTM D 3310 : 2000 : R2006
|
Standard Test Method for Determining Corrosivity of Adhesive Materials |
|
ASTM D 6464 : 2003 : REV A : EDT 1
|
Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
|
ASTM D 4300 : 2001 : R2008
|
Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
|
ASTM D 2339 : 1998
|
Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading |
|
ASTM D 3632 : 1998
|
Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
|
ASTM D 1579 : 2001 : R2008
|
Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives |
|
ASTM D 903 : 1998 : R2017
|
Standard Test Method for Peel or Stripping Strength of Adhesive Bonds |
|
ASTM D 2918 : 1999
|
Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel |
|
ASTM D 4783 : 2001 : EDT 1
|
Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi |
|
ASTM D 1583 : 2001 : R2013
|
Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
|
ASTM F 2458 : 2005 : R2015
|
Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants |
|
ASTM D 4783 : 2001 : R2008
|
Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi |
|
ASTM D 899 : 2000 : R2007
|
Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive |
|
ASTM D 1151 : 2000 : R2013
|
Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds |
|
ASTM D 3166 :1999
|
Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal) |
|
ASTM D 3434 : 2000 : R2013
|
Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
|
ASTM F 823 : 1993 : R1999
|
Standard Specification for Desk, Log, Marine, Steel, with Cabinet |
|
ASTM D 3434 : 2000 : R2018
|
Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
|
ASTM D 6411/D6411M : 1999 : R2005
|
Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
|
ASTM D 2293 : 1996
|
Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal) |
|
ASTM D 5824 : 1998 : R2003
|
Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
|
ASTM D 5215 : 1993 : R1999
|
Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives |
|
ASTM D 1995 : 1992 : R1998 : EDT 1
|
Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
|
ASTM D 2294 : 1996 : R2002
|
Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
|
ASTM D 4783 : 2001
|
Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi |
|
ASTM D 1780 : 2005
|
Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives |
|
ASTM D 3808 : 2001
|
Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion |
|
ASTM D 6465 : 1999 : R2005
|
Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
|
ASTM D 1779 : 1998
|
Standard Specification for Adhesive for Acoustical Materials |
|
ASTM D 5041 : 1998
|
Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints |
|
ASTM D 1490 : 2001
|
Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions |
|
ASTM D 3163 : 2001 : R2008
|
Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading |
|
ASTM D 4426:2001
|
Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating |
|
ASTM D 5113 : 1997 : R2016
|
Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam |
|
ASTM D 4688 : 1999 : R2013
|
Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber |
|
ASTM D 896 : 2004
|
Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents |
|
ASTM D 1304 : 1999
|
Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation |
|
ASTM D 4338:1997
|
Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend |
|
ASTM D 5572 : 1995 : R2005
|
Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products |
|
ASTM E 1605 : 2004 : R2012
|
Standard Terminology Relating to Lead in Buildings |
|
ASTM D 4783 : 2001 : R2013
|
Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi |
|
ASTM D 6195 : 2003 : EDT 1
|
Standard Test Methods for Loop Tack |
|
ASTM D 2293 : 1996 : R2002
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 7532 : 2009 : R2016
|
Standard Practice for Determination of Re-tack Ability of Carpet Adhesives |
|
ASTM D 6464 : 2003 : REV A
|
Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
|
ASTM D 1184 : 1998 : R2012
|
Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies |
|
ASTM D 3528 : 1996
|
Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
|
ASTM D 3433 : 1999 : R2005
|
Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints |
|
ASTM D 2843 : 1999
|
Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics |
|
ASTM D 4502 : 1992 : R1998 : EDT 1
|
Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints |
|
ASTM D 1151 : 2000 : R2006
|
Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds |
|
ASTM D 3164 : 2003 : R2017
|
Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
|
ASTM D 1304 : 1999 : R2005
|
Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation |
|
ASTM D 905 : 2008 : EDT 1
|
Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading |
|
ASTM D 1875 : 2003 : R2018
|
Standard Test Method for Density of Adhesives in Fluid Form |
|
ASTM F 2256 : 2005
|
Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading |
|
ASTM D 1876 : 2008 : R2015 : EDT 1
|
Standard Test Method for Peel Resistance of Adhesives (T-Peel Test) |
|
ASTM D 3932 : 1980
|
Practice for Control of the Application of Structural Fasteners When Attached by Hot Melt Adhesive (Withdrawn 1991) |
|
ASTM D 4317 : 2016 : REDLINE
|
Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives |
|
ASTM D 1338 : 1999 : R2016
|
Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength |
|
ASTM D 3632 : 1998 : R2004
|
Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
|
ASTM D 5657 : 2007
|
Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners |
|
ASTM D 2318 : 1998 : R2003
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 3929 : 2003
|
Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method |
|
ASTM D 2293 : 1996 : R2008
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 906 : 1998
|
Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading |
|
ASTM D 6411/D6411M:1999
|
Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
|
ASTM D 3110 : 1995
|
Specification for Adhesives Used in Laminate Joints for Nonstructural Glued Lumber Products (Withdrawn 1996) |
|
ASTM D 2878 : 2010
|
Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils |
|
ASTM D 1183 : 2003
|
Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions |
|
ASTM D 2295 : 1996
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 950 : 2003
|
Standard Test Method for Impact Strength of Adhesive Bonds |
|
ASTM D 2293 : 1996 : R2016
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 2303 : 1997
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 6325 : 1998
|
Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives |
|
ASTM D 2288 : 1997 : R2001
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 4562 : 2001
|
Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
|
ASTM D 4562 : 2001 : R2007
|
Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
|
ASTM D 4426 : 2001 : R2006
|
Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating |
|
ASTM F 2258 : 2005 : R2015
|
Standard Test Method for Strength Properties of Tissue Adhesives in Tension |
|
ASTM D 2296 : 2001
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 2295 : 1996 : R2016
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 4649 : 2003 : R2016
|
Standard Guide for Selection and Use of Stretch Wrap Films |
|
ASTM F 822 : 1993 : R2017
|
Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine |
|
ASTM D 1583 : 2001
|
Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
|
ASTM F 825 : 1993 : R2010
|
Standard Specification for Drawers, Furniture, Marine, Steel |
|
ASTM D 2293 : 1996 : R2016
|
Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal) |
|
ASTM D 5267 : 1997 : R2012
|
Standard Test Method for Determination of Extrudability of Cartridge Adhesives |
|
ASTM D 1994 : 2007 : R2015
|
Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives (Withdrawn 2021) |
|
ASTM D 4502 : 1992 : R2004
|
Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints |
|
ASTM D 3658 : 2001
|
Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints |
|
ASTM F 2392 : 2004 : R2010
|
Standard Test Method for Burst Strength of Surgical Sealants |
|
ASTM E 1605 : 2004
|
Standard Terminology Relating to Lead in Buildings |
|
ASTM D 2339 : 1998 : R2004
|
Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading |
|
ASTM D 903 : 1998 : R2004
|
Standard Test Method for Peel or Stripping Strength of Adhesive Bonds |
|
ASTM D 3482 : 2007 : REV A
|
Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives |
|
ASTM D 6383/D6383M : 1999 : R2011 : EDT 1
|
Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material |
|
ASTM D 5649 : 2015 : REDLINE
|
Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners |
|
ASTM D 6862 : 2011 : R2016
|
Standard Test Method for 90 Degree Peel Resistance of Adhesives |
|
ASTM D 2294 : 1996
|
Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
|
ASTM D 4680 : 1998
|
Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
|
ASTM D 1875 : 2003
|
Standard Test Method for Density of Adhesives in Fluid Form |
|
ASTM D 5574 : 1994 : R1999 : EDT 1
|
Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
|
ASTM D 3983 : 1998 : R2004
|
Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
|
ASTM D 3983 : 1998 : R2019
|
Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
|
ASTM D 2093 : 2003
|
Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding |
|
ASTM D 6464 : 2003
|
Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
|
ASTM D 5868 : 2001 : R2014
|
Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
|
ASTM D 3167 : 2010
|
Standard Test Method for Floating Roller Peel Resistance of Adhesives |
|
ASTM D 3929 : 2003 : R2015
|
Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method |
|
ASTM F 822 : 1993 : R2004
|
Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine |
|
ASTM D 3165 : 2007
|
Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies |
|
ASTM D 1779 : 1998 : R2004
|
Standard Specification for Adhesive for Acoustical Materials |
|
ASTM D 5648 : 2001 : R2014
|
Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity) |
|
ASTM D 1995 : 1992 : R2004
|
Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
|
ASTM D 6383 : 1999 : R2005
|
Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material |
|
ASTM D 3808 : 2001 : R2013
|
Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion |
|
ASTM D 3163 : 2001 : R2014
|
Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading |
|
ASTM D 3762 : 2003
|
Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test) |
|
ASTM D 345 : 2002
|
Side bearings of the freight wagon bogies. General specifications |
|
ASTM D 2845 : 2000 : R2004 : EDT 1
|
Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock |
|
ASTM D 2307 : 2007 : R2013
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 3983 : 1998 : R2011
|
Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
|
ASTM D 5751 : 1999 : R2012
|
Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products |
|
ASTM D 4896 : 2001 : R2016
|
Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results |
|
ASTM D 6383/D6383M : 1999 : R2015
|
Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material |
|
ASTM D 898 : 2005
|
Standard Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids (Withdrawn 2006) |
|
ASTM F 2392 : 2004
|
Standard Test Method for Burst Strength of Surgical Sealants |
|
ASTM D 3070 : 2000 : R2005
|
Standard Test Method of Rapid Pressure Determination of Pressurized Products |
|
ASTM D 3070 : 2000 : R2010
|
Standard Test Method of Rapid Pressure Determination of Pressurized Products |
|
ASTM D 2919 : 2001 : R2014
|
Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
|
ASTM D 3807 : 1998
|
Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics) |
|
ASTM D 5868 : 2001 : R2008
|
Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
|
ASTM F 782 : 2001 : R2012
|
Standard Specification for Doors, Furniture, Marine |
|
ASTM D 2843 : 1999 : R2004
|
Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics |
|
ASTM D 904 : 1999 : R2013
|
Standard Practice for Exposure of Adhesive Specimens to Artificial Light |
|
ASTM D 2288 : 1997
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 1994 : 2007
|
Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives |
|
ASTM D 1304 : 1999 : R2012
|
Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation |
|
ASTM D 2919 : 2001 : EDT 1
|
Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
|
ASTM D 1781 : 1998 : R2012
|
Standard Test Method for Climbing Drum Peel for Adhesives |
|
ASTM D 2300 : 2008 : R2017
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 3165 : 2007 : R2014
|
Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies |
|
ASTM D 1151 : 2000
|
Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds |
|
ASTM D 2319/D2319M : 1998 : R2013
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 5824 : 1998
|
Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
|
ASTM D 4426 : 2001 : R2013
|
Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating |
|
ASTM C 1862 : 2017
|
Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures |
|
ASTM D 6195 : 2003 : R2011
|
Standard Test Methods for Loop Tack |
|
ASTM D 3535 : 2007 : REV A : R2013
|
Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions |
|
ASTM D 2295 : 1996
|
Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal) |
|
ASTM D 2295 : 1996 : R2008
|
Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal) |
|
ASTM D 4800 : 1994 : R2015
|
Standard Guide for Classifying and Specifying Adhesives |
|
ASTM D 2093 : 2003 : R2011
|
Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding |
|
ASTM D 1337 : 2010 : R2016
|
Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength |
|
ASTM D 3167 : 2010 : R2017
|
Standard Test Method for Floating Roller Peel Resistance of Adhesives |
|
ASTM D 2878 : 1995 : R2000 : EDT 1
|
Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils |
|
ASTM D 2095 : 1996 : R2015
|
Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens |
|
ASTM D 906 : 1998 : R2011
|
Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading |
|
GOST R 52714:2018
|
Motor gasolines. Determination of individual and group hydrocarbon composition by capillary gas сhromatography method |
|
ASTM D 996 : 2016 : REDLINE
|
Standard Terminology of Packaging and Distribution Environments |
|
ASTM D 2318 : 1998 : R2013
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 3076 : 2000 : R2010
|
Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers |
|
ASTM D 5405/D5405M : 1998 : R2011 : EDT 1
|
Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material |
|
ASTM D 1780 : 2005 : R2012
|
Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives |
|
ASTM D 1146 : 2000 : R2007
|
Standard Test Method for Blocking Point of Potentially Adhesive Layers |
|
ASTM D 5751 : 1999
|
Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products |
|
ASTM D 2835 : 1989 : R2003
|
Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements |
|
ASTM D 3164 : 2003
|
Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
|
ASTM D 2094 : 2000
|
Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests |
|
ASTM D 4300 : 2001 : R2013
|
Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
|
ASTM F 823 : 1993 : R2010
|
Standard Specification for Desk, Log, Marine, Steel, with Cabinet |
|
ASTM F 823 : 1993 : R2017
|
Standard Specification for Desk, Log, Marine, Steel, with Cabinet |
|
ASTM D 1144 : 1999 : R2011
|
Standard Practice for Determining Strength Development of Adhesive Bonds |
|
ASTM D 5040 : 1990 : R2005
|
Standard Test Methods for Ash Content of Adhesives |
|
ASTM D 904 : 1999 : R2005
|
Standard Practice for Exposure of Adhesive Specimens to Artificial Light |
|
ASTM D 1337:2010
|
Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength |
|
ASTM D 7446 : 2009
|
Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials |
|
ASTM F 2255 : 2005
|
Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading |
|
ASTM D 6004 : 2004
|
Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives |
|
ASTM F 824 : 1993 : R2010
|
Standard Specification for Tables, Mess, Marine, Steel |
|
ASTM D 3482 : 2007 : REV A : R2014
|
Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives |
|
ASTM F 2458 : 2005
|
Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants |
|
ASTM F 825 : 1993 : R1999
|
Standard Specification for Drawers, Furniture, Marine, Steel |
|
ASTM D 7149 : 2005 : R2011 : EDT 1
|
Standard Practice for Determining the Freeze Thaw Stability of Adhesives |
|
ASTM D 904 : 1999 : R2008
|
Standard Practice for Exposure of Adhesive Specimens to Artificial Light |
|
ASTM D 1879 : 2006
|
Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation |
|
ASTM D 1183 : 2003 : R2011
|
Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions |
|
ASTM D 7888 : 2013
|
Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings |
|
ASTM D 3166 : 1999 : R2005
|
Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal) |
|
ASTM F 2523 : 2013 : REDLINE
|
Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers |
|
ASTM D 6396 : 1999 : R2012
|
Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees |
|
ASTM D 6396 : 1999 : R2005
|
Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees |
|
ASTM D 2094 : 2000 : EDT 1
|
Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests |
|
ASTM D 3808 : 2001 : R2007
|
Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion |
|
ASTM D 2293:1996:R2002
|
Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal) |
|
ASTM D 2557 : 1998 : R2010 : EDT 1
|
Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55°C (-450 to -67°F) |
|
ASTM D 4680 : 1998 : R2011
|
Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
|
ASTM D 4501 : 2001 : EDT 1
|
Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method |
|
ASTM D 1876 : 2008
|
Standard Test Method for Peel Resistance of Adhesives (T-Peel Test) |
|
ASTM D 5574 : 1994 : R2012
|
Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
|
ASTM F 2258 : 2005 : R2010
|
Standard Test Method for Strength Properties of Tissue Adhesives in Tension |
|
ASTM D 4338 : 1997 : R2004
|
Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend |
|
ASTM D 5573 : 1999 : R2012
|
Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints |
|
ASTM D 2294 : 1996 : R2008
|
Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
|
ASTM D 5405/D5405M : 1998 : R2015
|
Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material |
|
ASTM D 6464 : 2003 : REV A : R2017
|
Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
|
ASTM D 2834 : 1995 : R2002
|
Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes |
|
ASTM D 6411/D6411M : 1999 : R2012
|
Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
|
ASTM D 4500 : 1995
|
Standard Test Method for Determining Grit, Lumps, or Undissolved Matter in Water-Borne Adhesives (Withdrawn 2001) |
|
ASTM D 3528 : 1996 : R2016
|
Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
|
ASTM D 4498 : 2007 : R2015
|
Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives (Withdrawn 2021) |
|
ASTM D 3069 : 1994 : R2005
|
Standard Test Method for Delivery Rate of Aerosol Products |
|
ASTM F 824 : 1993 : R2017
|
Standard Specification for Tables, Mess, Marine, Steel |
|
ASTM D 2878 : 1995 : R2005
|
Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils |
|
ASTM D 2295 : 1996 : R2002
|
Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal) |
|
ASTM D 7966/D7966M : 2016 : REDLINE
|
Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
|
ASTM D 4027 : 1998
|
Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
|
ASTM D 5041 : 1998 : R2012
|
Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints |
|
ASTM D 2296 : 2001 : R2006
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 3070 : 2000
|
Standard Test Method of Rapid Pressure Determination of Pressurized Products |
|
ASTM D 5113 : 1997 : R2005
|
Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam |
|
ASTM D 2310 : 2006 : R2012
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 3933 : 1998 : R2017
|
Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing) |
|
ASTM D 4498 : 2007
|
Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives |
|
ASTM D 1875 : 2003 : R2008 : EDT 1
|
Standard Test Method for Density of Adhesives in Fluid Form |
|
ASTM D 3166 : 1999 : R2012
|
Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal) |
|
ASTM D 5574 : 1994 : R2005
|
Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
|
ASTM D 2310 : 2006
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM C 557 : 2003 : R2009 : EDT 1
|
Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
|
ASTM D 4649 : 2003 : R2009
|
Standard Guide for Selection and Use of Stretch Wrap Films |
|
ASTM F 2392 : 2004 : R2015
|
Standard Test Method for Burst Strength of Surgical Sealants |
|
ASTM D 1146 : 2000
|
TEST METHOD FOR BLOCKING POINT OF POTENTIALLY ADHESIVE LAYERS |
|
ASTM D 3482 : 2007
|
Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives |
|
ASTM F 2258 : 2005
|
Standard Test Method for Strength Properties of Tissue Adhesives in Tension |
|
ASTM D 5999 : 1996
|
Standard Test Method for Noninterference of Adhesives in Repulping (Withdrawn 2003) |
|
ASTM D 2835 : 1989 : R2017
|
Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements |
|
ASTM D 899 : 2000 : R2018
|
Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive |
|
ASTM D 6463/D6463M : 2006 : R2012
|
Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading |
|
ASTM F 2468 : 2005 : R2011
|
Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
|
ASTM D 1062 : 2008
|
Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds |
|
ASTM D 4027 : 1998 : R2004
|
Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
|
ASTM D 1582 : 1998 : R2011
|
Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives |
|
ASTM D 1489 : 2009 : R2016
|
Standard Test Method for Nonvolatile Content of Aqueous Adhesives |
|
ASTM D 1144:1999
|
Standard Practice for Determining Strength Development of Adhesive Bonds |
|
ASTM D 6325 : 1998 : R2004
|
Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives |
|
ASTM D 4339 : 2001 : R2007
|
Standard Test Method for Determination of the Odor of Adhesives |
|
ASTM D 6463/D6463M : 2006
|
Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading |
|
ASTM D 5040 : 1990 : R2011
|
Standard Test Methods for Ash Content of Adhesives |
|
ASTM D 2651 : 2001 : R2016
|
Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding |
|
AASHTO MP 22 : 2013(R 2019)
|
SPECIFICATION FOR FIBER-REINFORCED POLYMER COMPOSITE MATERIALS FOR HIGHWAY AND BRIDGE STRUCTURES |
|
ASTM D 4501 : 2001 : R2014
|
Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method |
|
ASTM D 2093 : 2003 : R2017
|
Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding |
|
ASTM D 1488 : 2000 : R2013
|
Standard Test Method for Amylaceous Matter in Adhesives |
|
ASTM D 1874 : 2016 : REDLINE
|
Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases |
|
ASTM F 823 : 1993 : R2004
|
Standard Specification for Desk, Log, Marine, Steel, with Cabinet |
|
ASTM D 3528 : 1996 : R2002
|
Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
|
ASTM D 3528 : 1996 : R2008
|
Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
|
ASTM D 3762 : 2003 : R2010
|
Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test) (Withdrawn 2019) |
|
ASTM D 1338:1999
|
Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength |
|
ASTM D 6105 : 2004 : R2012
|
Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding |
|
ASTM D 4800 : 1994 : R1999
|
Standard Guide for Classifying and Specifying Adhesives |
|
ASTM D 1995 : 1992 : R2011
|
Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
|
ASTM D 1582 : 1998
|
Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives |
|
ASTM D 1875 : 2003 : R2013
|
Standard Test Method for Density of Adhesives in Fluid Form |
|
ASTM D 2835 : 1989 : R1998
|
Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements |
|
ASTM D 2307 : 2007
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 3930 : 2008 : R2015
|
Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes |
|
ASTM D 2295 : 1996 : R2002
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
CSA O112.9 : 2010
|
EVALUATION OF ADHESIVES FOR STRUCTURAL WOOD PRODUCTS (EXTERIOR EXPOSURE) |
|
ASTM D 1488 : 2000 : R2006
|
Standard Test Method for Amylaceous Matter in Adhesives |
|
ASTM F 826 : 1994 : R1999
|
Standard Specification for Tops, Furniture, Marine, Steel |
|
AASHTO TP 84 : 2011: R2014
|
METHOD OF TEST FOR EVALUATION OF ADHESIVE ANCHORS IN CONCRETE UNDER SUSTAINED LOADING CONDITIONS |
|
ASTM D 6383 : 1999 : EDT 1
|
Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material |
|
ASTM D 903 : 1998 : R2010
|
Standard Test Method for Peel or Stripping Strength of Adhesive Bonds |
|
ASTM D 2094 : 2000 : R2014
|
Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests |
|
ASTM D 7149 : 2005 : R2016
|
Standard Practice for Determining the Freeze Thaw Stability of Adhesives |
|
ASTM C 557 : 2003 : EDT 1
|
Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
|
ASTM D 2918 : 1999 : R2005
|
Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel |
|
ASTM D 1490 : 2001 : R2006
|
Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions |
|
ASTM D 2835 : 1989 : R2012
|
Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements |
|
ASTM D 5573 : 1999
|
Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints |
|
ASTM D 2918 : 1999 : R2012
|
Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel |
|
ASTM D 2094 : 2000 : R2006
|
Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests |
|
ASTM D 5747/D5747M : 2008 : R2013 : EDT 1
|
Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids |
|
ASTM D 2095 : 1996 : R2002
|
Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens |
|
ASTM D 3310 : 2000 : R2014
|
Standard Test Method for Determining Corrosivity of Adhesive Materials |
|
ASTM F 2255 : 2005 : R2010
|
Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading |
|
ASTM D 896 : 2004 : R2010 : EDT 1
|
Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents |
|
ASTM D 5868 : 2001
|
Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
|
ASTM D 1062 : 2008 : R2015
|
Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds |
|
ASTM F 2256 : 2005 : R2010
|
Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading |
|
ASTM D 3433 : 1999
|
Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints |
|
ASTM D 1828 : 2001 : R2013
|
Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures |
|
ASTM C 557 : 2003
|
Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
|
ASTM D 4688/D4688M : 2014 : REDLINE
|
Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber |
|
ASTM D 1995 : 1992 : R2017
|
Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
|
ASTM D 906 : 1998 : R2004
|
Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading |
|
ASTM F 822 : 1993
|
FPECIFICATION FOR CHEST OF DRAWERS (CHIFFONIER), STEEL, MARINE |
|
ASTM D 3632 : 1998 : R2011
|
Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
|
ASTM D 1488 : 2000
|
Standard Test Method for Amylaceous Matter in Adhesives |
|
ASTM D 7532:2009
|
Standard Practice for Determination of Re-tack Ability of Carpet Adhesives |
|
ASTM D 2739 : 1997 : R2017
|
Standard Test Method for Volume Resistivity of Conductive Adhesives |
|
ASTM D 906 : 1998 : R2017
|
Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading |
|
ASTM D 1916 : 1993 : R1997
|
Standard Test Method for Penetration of Adhesives (Withdrawn 2005) |
|
ASTM D 3933 : 1998 : R2004
|
Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing) |
|
ASTM D 1779 : 1998 : R2011
|
Standard Specification for Adhesive for Acoustical Materials |
|
ASTM D 3807 : 1998 : R2012
|
Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics) |
|
ASTM D 950 : 2003 : R2011
|
Standard Test Method for Impact Strength of Adhesive Bonds |
|
ASTM D 8089 : 2017
|
Standard Practice for Accelerated Heat Aging for Floor Covering Adhesives |
|
GOST 849:2018
|
Primary nickel. SpecificationsE |
|
ASTM D 4027 : 1998 : R2011
|
Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
|
ASTM D 4800 : 1994 : R2005
|
Standard Guide for Classifying and Specifying Adhesives |
|
ASTM D 4338 : 1997 : R2016
|
Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend |
|
ASTM D 2739 : 1997
|
Standard Test Method for Volume Resistivity of Conductive Adhesives |
|
ASTM D 5648 : 2001 : R2019
|
Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity) |
|
ASTM D 1101 : 1997 : REV A
|
Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use |
|
ASTM D 2308 : 2007 : R2013
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 2319/D2319M : 1998 : R2008e1
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 5657 : 2007 : R2014
|
Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners |
|
ASTM D 5113:1997
|
Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam |
|
ASTM F 782 : 2001
|
Standard Specification for Doors, Furniture, Marine |
|
ASTM D 5215 : 1993
|
TEST METHOD FOR INSTRUMENTAL EVALUATION OF STAINING OF VINYL FLOORING BY ADHESIVES |
|
ASTM D 5824 : 1998 : R2011
|
Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
|
ASTM D 3983 : 1998
|
Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
|
ASTM D 2739 : 1997 : R2010
|
Standard Test Method for Volume Resistivity of Conductive Adhesives |
|
ASTM D 1490 : 2001 : R2018
|
Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions |
|
ASTM D 2307 : 2007A
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 2301 : 2010
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 2301 : 2010 : R2017
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 6412/D6412M : 1999 : R2005
|
Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials |
|
ASTM D 6005 : 2003 : R2008
|
Standard Test Method for Determining Slump Resistance of Carpet Adhesives |
|
ASTM D 3164 : 2003 : R2011
|
Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
|
ASTM D 2851 : 2015 : REDLINE
|
Standard Specification for Liquid Optical Adhesive |
|
ASTM D 6005 : 2003 : R2009
|
Standard Test Method for Determining Slump Resistance of Carpet Adhesives |
|
ASTM F 2458 : 2005 : R2010
|
Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants |
|
ASTM D 1101 : 1997 : REV A : R2006
|
Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use |
|
ASTM D 1583 : 2001 : R2018
|
Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
|
ASTM F 822 : 1993 : R2010
|
Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine |
|
ASTM D 3310 : 2000
|
Standard Test Method for Determining Corrosivity of Adhesive Materials |
|
ASTM D 4680 : 1998 : R2017
|
Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
|
ASTM D 7247 : 2017 : REDLINE
|
Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures |
|
ASTM D 1101 : 1997 : REV A : R2013
|
Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use |
|
ASTM D 2307 : 2007A : R2013
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 2294 : 1996 : R2008
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM F 2468 : 2005
|
Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
|
ASTM D 5113 : 1997 : R2011 : EDT 1
|
Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam |
|
ASTM D 2294 : 1996 : R2016
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM D 2651 : 2001
|
Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding |
|
ASTM D 3433 : 1999 : R2012
|
Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints |
|
ASTM F 2256 : 2005 : R2015
|
Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading |
|
ASTM D 5363 : 2016 : REDLINE
|
Standard Specification for Anaerobic Single-Component Adhesives (AN) |
|
ASTM D 2288 : 1997 : R2001
|
TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
|
ASTM F 782 : 2001 : R2007
|
Standard Specification for Doors, Furniture, Marine |
|
ASTM D 7446 : 2009 : R2017
|
Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials |
|
ASTM D 4339 : 2001
|
Standard Test Method for Determination of the Odor of Adhesives |
|
ASTM D 6465 : 1999 : R2012
|
Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
|
ASTM D 5572 : 1995 : R2012
|
Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products |
|
ASTM D 4339 : 2001 : R2013
|
Standard Test Method for Determination of the Odor of Adhesives |
|
ASTM F 822 : 1993 : R1999
|
Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine |
|
ASTM D 897 : 2008
|
Standard Test Method for Tensile Properties of Adhesive Bonds |
|
ASTM D 4562 : 2001 : R2013
|
Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
|
ASTM F 825 : 1993 : R2017
|
Standard Specification for Drawers, Furniture, Marine, Steel |
|
ASTM D 6195 : 2003
|
Standard Test Methods for Loop Tack |
|
ASTM D 904 : 1999
|
Standard Practice for Exposure of Adhesive Specimens to Artificial Light |
|
ASTM D 6465 : 1999 : R2016
|
Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
|
ASTM D 3929 : 2003 : R2010 : EDT 1
|
Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method |
|
ASTM D 2739 : 1997 : R2004
|
Standard Test Method for Volume Resistivity of Conductive Adhesives |
|
ASTM F 826 : 1994 : R2004
|
Standard Specification for Tops, Furniture, Marine, Steel |
|
ASTM D 6464 : 2003 : REV A : R2009 : EDT 1
|
Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
|
ASTM D 1184 : 1998
|
Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies |
|
ASTM E 1420 : 1991
|
Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996) |
|
ASTM D 896 : 2004 : R2017
|
Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents |
|
ASTM D 3023 : 1998 : R2003
|
Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents |
|
ASTM D 5215 : 1993 : R2005
|
Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives |
|
ASTM D 6105 : 2004
|
Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding |
|
ASTM D 2878 : 2010 : R2016
|
Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils |
|
ASTM D 5573 : 1999 : R2005
|
Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints |
|
ASTM F 824 : 1993 : R2004
|
Standard Specification for Tables, Mess, Marine, Steel |
|
ASTM D 2095 : 1996 : EDT 1
|
Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens |
|
ASTM D 2843 : 1999 : R2004 : EDT 1
|
Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics |
|
ASTM D 5040 : 1990 : R1997 : EDT 1
|
Standard Test Methods for Ash Content of Adhesives |
|
ASTM D 4688 : 1999
|
Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber |
|
ASTM D 6396 : 19991
|
Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees |
|
ASTM D 1338 : 1999 : R2005
|
Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength |
|
ASTM D 5648 : 2001
|
Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity) |
|
ASTM C 557 : 2003 : R2017
|
Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
|
ASTM D 5656 : 2010
|
Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading |
|
ASTM D 7149 : 2005
|
Standard Practice for Determining the Freeze Thaw Stability of Adhesives |
|
ASTM D 5405 : 1998
|
Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material |
|
ASTM D 3121 : 2017
|
Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball |
|
ASTM D 4896 : 2001
|
Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results |
|
ASTM D 4501 : 2001 : R2009 : EDT 1
|
Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method |
|
ASTM F 826 : 1994 : R2017
|
Standard Specification for Tops, Furniture, Marine, Steel |
|
ASTM D 903 : 1998
|
Standard Test Method for Peel or Stripping Strength of Adhesive Bonds |
|
ASTM D 6862:2011
|
Standard Test Method for 90 Degree Peel Resistance of Adhesives |
|
ASTM D 1781 : 1998
|
Standard Test Method for Climbing Drum Peel for Adhesives |
|
ASTM D 4338 : 1997 : R2011 : EDT 1
|
Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend |
|
ASTM D 6325 : 1998 : R2011
|
Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives |