|
API SPEC 11D1 : 2015
|
PACKERS AND BRIDGE PLUGS |
|
MIL S 6758 : B
|
STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) |
|
SAE AMS 5022 : 2015
|
STEEL, BARS, FORGINGS, AND TUBING, FREE-CUTTING, 0.14 - 0.20C (SAE 1117) |
|
API 6A REDLINE : 2010
|
SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
API 16C RUSSIAN : 1993
|
SPECIFICATION FOR CHOKE AND KILL SYSTEMS |
|
CSA W47.1 : 2009
|
CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
|
API 11D3 :2008
|
PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
|
SAE AMS 5747 : 2012
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 0.95CB(NB) - 2.5TI - 0.70AL - 7.0FE, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
ASTM A 823 : 1999
|
Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
|
SAE J 434 : 2017
|
AUTOMOTIVE DUCTILE (NODULAR) IRON CASTINGS |
|
DOD F 24669/7 : 0
|
FORGINGS AND FORGING STOCK, STEEL BARS AND BILLETS, CORROSION RESISTING, NAVAL STEAM TURBINE USE (METRIC) |
|
API 5DP CHINESE : 2009
|
SPECIFICATION FOR DRILL PIPE |
|
API 5C6 RUSSIAN : 2012
|
WELDING CONNECTIONS TO PIPE |
|
SAE AMS 5441 : 2016
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
|
MIL P 60596 : B
|
PROJECTILE, HE, 8 INCH M106 METAL PARTS ASSEMBLY |
|
MIL P 64008 : 0
|
PROJECTILE, 155MM: XM825 METAL PARTS ASSEMBLY |
|
MIL P 60547 : F
|
PROJECTILE, 105 MM, HE, M1 & M760 METAL PARTS ASSEMBLY |
|
MIL P 50345 : F
|
PROJECTILES,155MM:M483A1-M718/M741-M692/M731 METAL PARTS ASSEMBLY |
|
MIL DTL 45916 : C
|
INSERT, SCREW THREAD - THREAD CUTTING AND THREAD FORMING |
|
08/30168345 DC : DRAFT JULY 2008
|
BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
|
DOD F 24669/2 : 0
|
FORGINGS AND FORGING STOCK, STEEL BARS AND BILLETS - CHROMIUM MOLYBDENUM ALLOY (METRIC) |
|
FF B 575 : C
|
BOLTS, HEXAGON AND SQUARE |
|
SAE J 1887 : 2018
|
AUTOMOTIVE COMPACTED GRAPHITE IRON CASTINGS |
|
MIL H 6875 : H
|
HEAT TREATMENT OF STEEL RAW MATERIALS |
|
MIL S 23284 : A
|
STEEL FORGINGS, CARBON AND ALLOY, FOR SHAFTS, SLEEVES, COUPLINGS AND STOCKS (RUDDERS AND DIVING PLANES) |
|
SAE AMS 4222 : 2017
|
ALUMINUM ALLOY CASTINGS, SAND, MODERATE HEAT RESISTANCE 4.0CU - 2.0NI - 1.5MG - 0.12TI (242.0P) SOLUTION HEAT TREATED AND STABILIZED |
|
MIL H 21367 : E
|
HULL FITTINGS: CONNECTORS, ADAPTER, END SEALS, AND STUFFING TUBES FOR FLEXIBLE, SOLID-DIELECTRIC, RADIO-FREQUENCY CABLES |
|
MIL DTL 60547 : G
|
PROJECTILE, 105 MM, HE, M1 AND M760 - METAL PARTS ASSEMBLY |
|
MIL PRF 13803 : F
|
VALVE, GATE - DOUBLE-DISK, CAST-IRON OR STEEL |
|
12/30262118 DC : 0
|
BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
|
API 6A : 2010
|
SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
13/30261096 DC : 0
|
BS EN ISO 17945 - MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
|
17/30361645 DC : DRAFT SEP 2017
|
BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
|
06/30125909 DC : DRAFT OCT 2006
|
ISO 13628-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
|
MIL A 46177 : B
|
ARMOR, STEEL PLATE & SHEET, WROUGHT, HOMOGENEOUS (1/8 TO LESS THAN 1/4 INCH THICK) |
|
API 6DSS : 2017-08
|
SPECIFICATION FOR SUBSEA PIPELINE VALVES |
|
API 11D3 : 2008 : R2015
|
PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
|
FF B 584 : F
|
BOLTS, FINNED NECK, KEY HEAD, MACHINE, RIBBED NECK, SQUARE NECK, TEE HEAD |
|
MIL DTL 12560 : K
|
ARMOR PLATE, STEEL, WROUGHT, HOMOGENEOUS (FOR USE IN COMBAT-VEHICLES AND FOR AMMUNITION TESTING) |
|
MIL S 45933 : 0
|
STUD, KEYRING LOCKED, 125 AND 160 KSI FTU, GENERAL SPECIFICATION FOR |
|
QQ N 00286 : F
|
NICKEL-COPPER-ALUMINUM ALLOY, WROUGHT (UNS N05500) |
|
MIL P 60584 : A
|
PROJECTILE, 155MM, SMOKE, WP, M110 METAL PARTS ASSEMBLY |
|
API 6A CHINESE : 2011
|
SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
MIL Q 45970 : A
|
QUALITY ASSURANCE FOR WEAPONS AND SUPPORT MATERIAL |
|
03/312144 DC : DRAFT JULY 2003
|
ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE |
|
08/30190263 DC : DRAFT SEP 2008
|
BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
|
MIL DTL 46193 : A
|
ARMOR PLATE, CONTROL ROLLED, STEEL, WROUGHT, HIGH STRENGTH, HIGH QUALITY |
|
MIL DTL 46100 : E
|
ARMOR PLATE, STEEL, WROUGHT, HIGH-HARDNESS |
|
ASTM A 532/A532M : 2010
|
Standard Specification for Abrasion-Resistant Cast Irons |
|
SAE AMS 5704 : 2015
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, FORGINGS 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1825 TO 1900 DEGREES F (996 TO 1038 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
|
I.S. EN ISO 17945:2015
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
|
MIL S 8844 : D
|
STEEL BAR, REFORGING STOCK AND MECHANICAL TUBING LOW ALLOY PREMIUM QUALITY |
|
MIL I 45932 : 0
|
INSERT, SCREW THREAD, THIN WALL, LOCK IN |
|
SAE AMS 5712 : 2016
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
ASTM A 2 : 2002 : R2008
|
Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
|
I.S. EN ISO 28781:2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
|
API 11V1 :1995
|
SPECIFICATION FOR GAS LIFT EQUIPMENT |
|
SAE AMS 5010 : 2014
|
STEEL BARS FREE-MACHINING COLD DRAWN (SAE 1212 OR SAE 1215) |
|
SAE AMS 2303 : 2016
|
STEEL CLEANLINESS, AIRCRAFT QUALITY, MARTENSITIC CORROSION-RESISTANT STEELS, MAGNETIC PARTICLE INSPECTION PROCEDURE |
|
SAE AMS 5024 : 2015
|
STEEL, BARS, FORGINGS, AND TUBING, FREE-CUTTING, 1.5MN (0.32 - 0.39C) (SAE 1137) |
|
SAE AMS 5750 : 2017
|
ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT, NICKEL BASE - 15.5CR - 16MO - 3.8W - 5.5FE, SOLUTION HEAT TREATED |
|
SAE AMS 5665 : 2012
|
NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 74NI - 15.5CR - 8.0FE |
|
AWS B4.0M : 2000
|
STANDARD METHODS FOR MECHANICAL TESTING OF WELDS |
|
AWS B4.0 : 2016
|
STANDARD METHODS FOR MECHANICAL TESTING OF WELDS |
|
SAE AMS 5886 : 2014
|
ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 50NI - 20CR - 20CO - 5.8MO - 2.2TI - 0.45AL CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 2100 DEGREES F (1149 DEGREES C) SOLUTION HEAT TREATED |
|
SAE AMS 5771 : 2014
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 74NI - 7.0CR - 16.5 MO, SOLUTION HEAT TREATED |
|
ASTM B 752 : 2006 : R2011 : EDT 1
|
Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application |
|
API 2W : 2006 : R2012
|
SPECIFICATION FOR STEEL PLATES FOR OFFSHORE STRUCTURES, PRODUCED BY THERMO-MECHANICAL CONTROL PROCESSING (TMCP) |
|
API 5C6 : 2006 : R2012
|
PIPE WITH WELDED CONNECTORS |
|
SAE AMS 4223 : 2015
|
ALUMINUM ALLOY, CASTINGS, 4.5CU - 0.70AG - 0.30MN - 0.25MG - 0.25TI (A201.0-T4), SOLUTION HEAT TREATED AND NATURALLY AGED |
|
ASTM B 599 : 1992 : R2009 : EDT 1
|
Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
|
SAE AMS 2355 : 2017
|
QUALITY ASSURANCE, SAMPLING AND TESTING, ALUMINUM ALLOYS AND MAGNESIUM ALLOY, WROUGHT PRODUCTS (EXCEPT FORGING STOCK), AND ROLLED, FORGED, OR FLASH WELDED RINGS |
|
SAE AMS 4434 : 2017
|
MAGNESIUM ALLOY CASTINGS, SAND, 9.0AL - 2.0ZN (AZ92A-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
|
ASTM A 602 : 1994 : R2014
|
Standard Specification for Automotive Malleable Iron Castings |
|
ASTM A 125 : 1996 : R2001
|
Standard Specification for Steel Springs, Helical, Heat-Treated |
|
ASTM B 427 : 2009
|
Standard Specification for Gear Bronze Alloy Castings |
|
ASTM F 541 : 2012 : REDLINE
|
Standard Specification for Alloy Steel Eyebolts |
|
ASTM B 427 : 2009 : R2015
|
Standard Specification for Gear Bronze Alloy Castings |
|
ASTM F 3213 : 2017
|
Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
|
ASTM A 47/A47M : 1999 : R2004
|
Standard Specification for Ferritic Malleable Iron Castings |
|
SAE AMS 4862 : 2016
|
MANGANESE BRONZE, SAND AND CENTRIFUGAL CASTINGS 63CU - 24ZN - 6.2AL - 3.8MN - 3.0FE HIGH STRENGTH, AS CAST |
|
ASTM A 47M : 1990
|
Standard Specification for Ferritic Malleable Iron Castings [Metric] |
|
ASTM B 599 : 1992 : R2014
|
Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
|
ASTM B 945 :2006
|
Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers |
|
ASTM A 159 : 1983 : R2011
|
Standard Specification for Automotive Gray Iron Castings |
|
ASTM F 1314 : 2018 : REDLINE
|
Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) |
|
ASTM B 945 : 2006 : R2014
|
Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10–Type Tempers |
|
ASTM A 47/A47M : 1999 : R2009
|
Standard Specification for Ferritic Malleable Iron Castings |
|
ASTM B 599 : 1992 : R2003 : EDT 1
|
Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
|
ASTM A 476/A476M : 2000
|
Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
|
UNI EN ISO 11960 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
|
ASTM A 1 : 2000 : R2010
|
Standard Specification for Carbon Steel Tee Rails |
|
ASTM B 688 : 1996
|
Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
|
ASTM B 807/B807M : 2013 : REDLINE
|
Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys |
|
ASTM A 834 : 1995 : R2001
|
Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
|
ASTM E 1004 : 2017 : REDLINE
|
Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
|
ASTM F 1684 : 2006 : R2011
|
Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications |
|
ASTM F 620 : 2011
|
Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
|
ASTM A 395/A395M : 1999 : R2014
|
Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
|
ASTM B 546 : 2004
|
Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
|
ASTM A 834 : 1995 : R2015
|
Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
|
NFPA 1901:2016
|
AUTOMOTIVE FIRE APPARATUS |
|
DIN EN ISO 15156-2:2015-12
|
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
|
ISO 13628-10:2005
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |
|
BS EN ISO 11960:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
|
MIL DTL 18295 : F
|
CHAINS AND FITTINGS FOR FLEET MOORING |
|
SAE AMS 5667 : 2015
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE EQUALIZED, PRECIPITATION HARDENABLE |
|
MIL P 13326 : D
|
PLATE, METAL, STEEL ALLOY; HEAT TREATED, HIGH STRENGTH; FOR WELDED STRUCTURES |
|
MIL W 63150 : 0
|
WEAPONS AND SUPPORT MATERIAL STANDARD QUALITY ASSURANCE PROVISIONS FOR |
|
CSA W47.1 : 2009 : R2014
|
CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
|
ASTM A 1095 : 2015
|
Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings |
|
MIL P 63208 : B
|
PROJECTILE, 105 MM, HEAT T, M622 METAL PARTS |
|
CSA W47.1 : 2009 : INC : UPD 3 : 2011
|
CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
|
API 6ACRA : 2015 : ERR 1 : 2015
|
AGE-HARDENED NICKEL-BASED ALLOYS FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
|
SAE AMS 5713K : 2016
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 4249B : 2012 (R2018)
|
ALUMINUM ALLOY CASTINGS 7.0SI - 0.58MG - 0.15TI - 0.06BE (D357.0-T6) SOLUTION AND PRECIPITATION HEAT TREATED (REQUIRING FATIGUE AND FRACTURE TOUGHNESS TESTING) |
|
SAE AMS 5663 : 2016
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
|
MIL DTL 32332 : 0
|
ARMOR PLATE, STEEL, WROUGHT, ULTRA-HIGH-HARDNESS |
|
API 6A718 REDLINE : 2009
|
NICKEL BASE ALLOY 718 (UNS N07718) FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
|
NFPA 1914 : 2002
|
TESTING FIRE DEPARTMENT AERIAL DEVICES |
|
ASTM B 719 : 2000 : R2009
|
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
|
DOD STD 35/19 : A
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM TERMINALS AND TERMINAL STRIPS |
|
DOD C 70514 : 0
|
CARTRIDGE, 120MM, SUPER SLUG, LOAD, ASSEMBLE, AND PACK |
|
ASTM B 647 : 2010
|
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage |
|
API BULL 2S : 1995
|
DESIGN OF WINDLASS WILDCATS FOR FLOATING OFFSHORE STRUCTURES |
|
ASTM B 247M : 2015 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric) |
|
BS EN ISO 11961:2008
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
|
MIL C 18295 : E
|
CHAIN AND FITTINGS FOR FLEET MOORINGS |
|
MIL P 14852 : B
|
PROJECTILE, 105 MM ILLUMINATING, M314A3, METAL PARTS ASSEMBLY |
|
ASTM A 942 : 1995
|
Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells |
|
SAE AMS 5442 : 2017
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
|
ASTM B 277 : 1995
|
Standard Test Method for Hardness of Electrical Contact Materials |
|
SAE AMS 4335 : 2017
|
FORGINGS, ALUMINUM ALLOYS, 2XXX AND 7XXX, HEAT-TREATED, FINISHED-PART PROPERTIES: SHORT-TRANSVERSE TENSILE PROPERTIES AND FRACTURE TOUGHNESS |
|
MIL P 70524 : 0
|
PROJECTILE, 105 MM, HE, RA, XM913/XM927 WARHEAD INSULATION ASSEMBLY FOR |
|
MIL A 12545 : D
|
ALUMINUM ALLOY IMPACTS |
|
MIL S 12515 : C
|
SURFACE HARDENING, FLAME AND INDUCTION (FOR FERROUS ALLOYS) |
|
ASTM F 765 : 1993 : R2017
|
Standard Specification for Wildcats, Ship Anchor Chain |
|
API 20C : 2015
|
CLOSED DIE FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
|
MIL A 46173 : 0
|
ARMOR, STEEL, PLATE, WROUGHT, (ESR) (3/16 THROUGH 3 LINES, INCLUSIVE) |
|
DOD STD 35/36 : B
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM SEALS, GASKETS AND PACKING |
|
MIL DTL 24231 : E
|
CONNECTORS, PLUGS, RECEPTACLES, ADAPTERS, HULL INSERTS, AND HULL INSERT PLUGS, PRESSURE-PROOF, GENERAL SPECIFICATION FOR |
|
ASTM B 894 : 2017 : REDLINE
|
Standard Specification for ACuZinc5 |
|
QQ C 390 : B
|
COPPER ALLOY CASTINGS (INCLUDING CAST BAR) |
|
ASTM A 833 : 2017 : REDLINE
|
Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers |
|
ASTM G 81 : 1997 : REV A : R2013
|
Standard Test Method for Jaw Crusher Gouging Abrasion Test |
|
API SPEC 19TT : 2016
|
SPECIFICATION FOR DOWNHOLE WELL TEST TOOLS AND RELATED EQUIPMENT |
|
MIL P 60620 : D
|
PROJECTILE ASSEMBLY FOR CARTRIDGE, SMOKE, WP, 81MM, M375A1 |
|
DOD F 24669/3 : 0
|
FORGINGS AND FORGING STOCK, STEEL BARS AND BILLETS FOR NITRIDING (METRIC) |
|
SAE AMS S 11310 : 1998
|
STEEL BARS, CARBON, HOT ROLLED, FOR COLD SHAPING, INCLUDING COLD EXTRUSION |
|
SAE AS 7101 : 2007
|
NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) GENERAL REQUIREMENTS FOR MATERIALS TEST LABORATORY ACCREDITATION PROGRAM |
|
SAE AMS 4873 : 2016
|
ALUMINUM BRONZE ALLOY, SAND CASTINGS - 85CU - 11AL - 3.6FE - SOLUTION HEAT TREATED AND TEMPERED |
|
SAE AMS 4634 : 2015
|
ALUMINUM BRONZE BARS, RODS, AND FORGINGS, 90.5CU - 7.5AL - 1.9SI, STRESS RELIEVED |
|
ASTM A 159 : 1983 : R2006
|
Standard Specification for Automotive Gray Iron Castings |
|
SAE AMS 4892 : 2017
|
ALLOY CASTINGS, CORROSION AND HEAT-RESISTANT, 66NI - 29CU - 4.0SI, AS CAST |
|
SAE AMS 4617 : 2017
|
ALUMINUM ALLOY, EXTRUSIONS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73, 7075-T73511, 7075-T73510), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING WHEN REQUIRED, AND OVERAGED |
|
SAE AMS 5884 : 2016
|
IRON-NICKEL ALLOY, BARS, FORGINGS, AND RINGS, 42FE - 37.5NI - 14CO - 4.8CB(NB) - 1.6TI, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE MULTIPLE MELTED, HIGH TEMPERATURE, LOW EXPANSION |
|
SAE AMS 4406 : 2018
|
ALUMINUM ALLOY, CENTRIFUGAL CASTINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (709.0-T61), HOT ISOSTATICALLY PRESSED, SOLUTION AND PRECIPITATION HEAT TREATED |
|
ISO 10433:1994
|
Petroleum and natural gas industries — Drilling and production equipment — Specification for wellhead surface safety valves and underwater safety valves for offshore service |
|
SAE J 417 : 2018
|
HARDNESS TESTS AND HARDNESS NUMBER CONVERSIONS |
|
SAE AMS 4635 : 2015
|
ALUMINUM BRONZE BARS, RODS, AND FORGINGS, 87CU - 9AL - 3FE, STRESS RELIEVED |
|
SAE AMS 4632 : 2001
|
ALUMINUM BRONZE BARS AND RODS 90CU - 8.5A1, HARD |
|
SAE AMS 4420 : 2017
|
MAGNESIUM ALLOY CASTINGS, SAND, 6AL - 3ZN (AZ63A-F), AS CAST |
|
SAE AMS 7490 : 2014
|
RINGS, FLASH WELDED, CORROSION AND HEAT-RESISTANT AUSTENITIC STEELS, AUSTENITIC-TYPE IRON, NICKEL, OR COBALT ALLOYS, OR PRECIPITATION-HARDENABLE ALLOYS |
|
SAE AMS 4616 : 2012
|
SILICON BRONZE BARS, RODS, FORGINGS, AND TUBING 92CU - 3.2SI - 2.8ZN - 1.5FE STRESS RELIEVED |
|
SAE AMS 4111 : 2014
|
ALUMINUM ALLOY FORGINGS, 7.7ZN - 2.5MG - 1.5CU - 0.16CR (7049-T73), SOLUTION AND PRECIPITATION HEAT TREATED |
|
MSS SP 118 : 2007
|
COMPACT STEEL GLOBE & CHECK VALVES - FLANGED, FLANGELESS, THREADED & WELDING ENDS (CHEMICAL & PETROLEUM REFINERY SERVICE) |
|
ASTM B 648 : 2010
|
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor |
|
ASTM B 162 : 1999 : R2009
|
Standard Specification for Nickel Plate, Sheet, and Strip |
|
SAE AMS 5701 : 2015
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
|
SAE AMS 4614 : 2012
|
BRASS FORGINGS, FREE CUTTING 60CU - 2.0PB - 37.5ZN AS FORGED (M10) (COMPOSITION SIMILAR TO UNS C37700) |
|
API SPEC 2W:2006
|
SPECIFICATION FOR STEEL PLATES FOR OFFSHORE STRUCTURES, PRODUCED BY THERMO-MECHANICAL CONTROL PROCESSING (TMCP) |
|
SAE AMS S 6758 : 2017
|
STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) |
|
EN ISO 11961:2008/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
|
ASTM F 2581 : 2012
|
Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
|
SAE AMS 5706 : 2015
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.006B - 0.05ZR, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1825 TO 1900 DEGREES F SOLUTION HEAT TREATED |
|
SAE AMS 5638 : 2015
|
STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 0.14S - 18CR - 9.5NI - 0.50MO - 0.80AL (303MA), FREE-MACHINING; SWAGING OR UPSETTING, SOLUTION HEAT TREATED |
|
ASTM B 599 : 1992 : R1997
|
Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
|
ASTM A 834 : 1995
|
Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
|
SAE AMS 5754 : 2012
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18.5FE, SOLUTION HEAT TREATED |
|
SAE AMS 5755 : 2014
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 64NI - 5.0CR - 24.5MO - 5.5FE, SOLUTION HEAT TREATED |
|
API 6AR : 1994
|
RECOMMENDED PRACTICE FOR REPAIR AND REMANUFACTURE OF WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
ASTM F 3056 : 2014
|
Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
|
ASTM F 2924 : 2014 : REDLINE
|
Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
|
ASTM A 1038 : 2017 : REDLINE
|
Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method |
|
SAE AMS 7496 : 2012
|
RINGS, FLASH WELDED CARBON AND LOW-ALLOY STEELS |
|
ASTM A 476/A476M : 2000 : R2005
|
Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
|
ASTM F 3056 : 2014 : EDT 1
|
Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
|
SAE AMS 2759 : 2014
|
HEAT TREATMENT OF STEEL PARTS, GENERAL REQUIREMENTS |
|
ASTM F 1586 : 2013 : EDT 1
|
Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675) |
|
ASTM B 688 : 1996 : R2004
|
Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
|
ASTM F 620 : 2011 : R2015
|
Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
|
SAE AMS 5700G : 2018
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 13.5CR - 13.5NI - 0.35MO - 2.2W, ANNEALED |
|
ASTM B 168 : 2011(R2016)
|
Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, and Strip |
|
ASTM B 718 : 2000 : R2006
|
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip |
|
ASTM B 718 : 2000 : R2011
|
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip |
|
ASTM A 220/A220M : 1999
|
Standard Specification for Pearlitic Malleable Iron |
|
ASTM A 476/A476M : 2000 : R2014
|
Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
|
ASTM B 749 : 2014 : REDLINE
|
Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products |
|
ASTM F 1106 : 1987 : R2012
|
Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head) |
|
ASTM F 3055 : 2014
|
Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
|
ASTM B 929 : 2017 : REDLINE
|
Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar |
|
ASTM A 125 : 1996
|
Standard Specification for Steel Springs, Helical, Heat-Treated |
|
ASTM F 3055 : 2014 : EDT 1
|
Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
|
ASTM A 602 : 1994 : R2009
|
Standard Specification for Automotive Malleable Iron Castings |
|
ASTM G 81 : 1997 : REV A : R2002 : EDT 1
|
Standard Test Method for Jaw Crusher Gouging Abrasion Test |
|
ASTM F 2229 : 2012 : REDLINE
|
Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
|
ASTM B 763/B763M : 2015 : REDLINE
|
Standard Specification for Copper Alloy Sand Castings for Valve Applications |
|
ASTM F 561 : 2013
|
Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids |
|
ISO 13628-4:2010
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
|
ISO 11960:2014
|
Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
|
I.S. EN ISO 15136-1:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
|
I.S. EN ISO 15156-2:2015&LC:2015
|
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
|
I.S. EN ISO 10423:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
EN ISO 15156-2:2015
|
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015) |
|
I.S. EN ISO 11960:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
|
NF EN ISO 10423 : 2013
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
API 7NRV : 2006 : R2012
|
SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
|
ASTM B 277 : 1995 : R2006
|
Standard Test Method for Hardness of Electrical Contact Materials |
|
CSA W47.1 : 2009 : INC : UPD 7 : 2014
|
CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
|
API TR 938-B : 2008
|
USE OF 9CR-1MO-V (GRADE 91) STEEL IN THE OIL REFINING INDUSTRY |
|
SAE AMS 4417 : 2018
|
CASTINGS, SAND, MAGNESIUM ALLOY, 1.5AG - 2.1DI - 0.08CU - 0.70ZR (EQ21A - T6), SOLUTION AND PRECIPITATION HEAT TREATED |
|
ASTM B 824 : 2017 : REDLINE
|
Standard Specification for General Requirements for Copper Alloy Castings |
|
MIL DTL 60584 : B
|
PROJECTILE, 155 MILLIMETER - SMOKE, WP, METAL PARTS ASSEMBLY, M110A2 |
|
MIL DTL 3241 : F
|
REELS, CABLE (REELS DR-5(), DR-7(), DR-B(), RC-453()/G, RL-159()/U) |
|
MIL V 13803 : E
|
VALVE, GATE, DOUBLE DISC, CAST IRON OR STEEL |
|
SAE AMS 4314 : 2012
|
ALUMINUM ALLOY, RINGS, ROLLED OR FORGED 4.5CU - 0.85SI - 0.80MN - 0.50MG (2014-T651, 2014-T652) SOLUTION HEAT TREATED, MECHANICALLY STRESS RELIEVED AND PRECIPITATION HEAT TREATED |
|
MIL P 63293 : B
|
PROJECTILE, 105 MM, HEAT T MP, M456A2 METAL PARTS ASSEMBLY |
|
MIL P 60646 : B
|
PROJECTILE, 105 MM, HEAT-T, M456A1 METAL PARTS |
|
ASTM A 125 : 1996 : R2013
|
Standard Specification for Steel Springs, Helical, Heat-Treated |
|
MIL P 50585 : 0
|
PROJECTILE 8 INCH, HE, M404 HARDWARE FOR |
|
SAE MAM 5706 : 2003
|
ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT, 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4A1 - 0.006B - 0.05ZR, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 995 DEGREES - 1040 DEGREES C SOLUTION HEAT TREATED |
|
GGG P 831 : F
|
PUNCHES; CENTER, DRIVE PIN, ALIGNING, AND PRICK |
|
API 945:2003
|
AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS |
|
ASTM F 765 : 1993 : R1998
|
Standard Specification for Wildcats, Ship Anchor Chain |
|
A A 52114 : A
|
MATTAX, WITH CARRIER |
|
MIL S 11310 : E
|
STEEL BARS, CARBON, HOT ROLLED, FOR COLD SHAPING, INCLUDING COLD EXTRUSION |
|
API SPEC 20E : 2017
|
ALLOY AND CARBON STEEL BOLTING FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRIES |
|
SAE AMS 2304 : 2015
|
STEEL CLEANLINESS, SPECIAL AIRCRAFT-QUALITY MAGNETIC PARTICLE INSPECTION PROCEDURE |
|
API 16A : 2017
|
SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
|
ASTM A 159 : 1983 : R2001
|
Standard Specification for Automotive Gray Iron Castings |
|
AGMA 2004 : C
|
GEAR MATERIALS, HEAT TREATMENT AND PROCESSING MANUAL |
|
ASTM A 47/A47M : 1999 : R2014
|
Standard Specification for Ferritic Malleable Iron Castings |
|
API 5DP : 2010(R2015)
|
SPECIFICATION FOR DRILL PIPE |
|
SAE AMS 4285 : 2017
|
ALUMINUM ALLOY CASTINGS, CENTRIFUGAL, 7.0SI - 0.30MG (356.0-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
|
04/301931 DC : DRAFT JAN 2004
|
ISO 13628-2 - PETROLEUM AND NATURAL GAS INDUSTRIES DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
|
AWWA C507 : 2015
|
BALL VALVES, 6 IN. THROUGH 60 IN. (150 MM THROUGH 1,500 MM) |
|
ASTM B 505/B505M : 2018 : REDLINE
|
Standard Specification for Copper Alloy Continuous Castings |
|
API 6ACRA : 2015 : INC : ADD 1 : 2017
|
AGE-HARDENED NICKEL-BASED ALLOYS FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
|
ASTM G 81 : 1997 : REV A : R2007
|
Standard Test Method for Jaw Crusher Gouging Abrasion Test |
|
MIL P 45971 : 0
|
PRODUCT ENGINEERING QUALITY ENGINEERING SYSTEM (PEQES) FOR WEAPONS AND SUPPORT MATERIAL |
|
MIL STD 1252 : 0
|
INERTIA FRICTION WELDING PROCESS, PROCEDURE AND PERFORMANCE QUALIFICATION |
|
ASTM A 1099/A1099M : 2017
|
Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels |
|
SAE AMS 7482 : 1995
|
STUDS - STEEL, CORROSION AND HEAT RESISTANT,ROLL THREADED AFTER HEAT TREATMENT, 1800F (980 C) SOL HEAT TREATED |
|
MIL C 19310 : A
|
COPPER-CHROMIUM-ALLOY CASTINGS |
|
MIL P 70679 : 0
|
PROJECTILE, 60MM, WP, XM722 BODY ASSEMBLY |
|
MIL STD 1693 : A NOTICE 2
|
FABRICATION WELDING AND INSPECTION OF HYPERBARIC CHAMBERS AND OTHER CRITICAL LAND BASED STRUCTURES |
|
SAE AMS 4440 : 1999
|
MAGNESIUM ALLOY CASTINGS, SAND 3.5CE - 0.70ZR (EK41A-T5) PRECIPITATION HEAT TREATED |
|
ASTM F 3302 : 2018
|
Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
|
SAE AMS 5660 : 2015
|
NICKEL-IRON ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 12.5CR - 42.5NI - 6.0MO - 2.7TI - 0.015B - 34FE, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
|
SAE AMS 5891 : 2013
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 60NI - 22CR - 2.0MO - 14W - 0.35AL - 0.03LA, ANNEALED |
|
SAE AMS 4676 : 2017
|
NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 66.5NI - 3.0AL - 0.62TI - 28CU, HOT-FINISHED, PRECIPITATION HARDENABLE |
|
DOD S 63543 : 0
|
STUD & ROD, THREADED, METRIC, GENERAL SPECIFICATION FOR |
|
SAE AMS 4871 : 2010(S2015)
|
ALUMINUM BRONZE, CENTRIFUGAL AND CHILL CASTINGS, 85CU - 11AL - 3.6FE, SOLUTION HEAT TREATED AND TEMPERED |
|
ASTM F 765 : 1993 : R2006
|
Standard Specification for Wildcats, Ship Anchor Chain |
|
ASTM A 395/A395M : 1999 : EDT 1
|
Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
|
SAE J 2582 : 2018
|
AUTOMOTIVE DUCTILE IRON CASTINGS FOR HIGH TEMPERATURE APPLICATIONS |
|
API SPEC 16F : 2017
|
SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
|
API 2SF : 2013
|
MANUFACTURE OF STRUCTURAL STEEL FORGINGS FOR PRIMARY OFFSHORE APPLICATIONS |
|
SAE AMS 5877 : 2012
|
IRON ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05LA - 0.20N, SOLUTION HEAT TREATED |
|
SAE J 431 : 2018
|
AUTOMOTIVE GRAY IRON CASTINGS |
|
ASTM A 602 : 1994 : R2004
|
Standard Specification for Automotive Malleable Iron Castings |
|
SAE AMS 5854 : 2015
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 61NI - 20.5CR - 8.5MO - 3.4CB(NB) - 1.3TI - 5.0FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION HEAT TREATED |
|
SAE AMS 5069 : 2001(S2016)
|
STEEL BARS, FORGINGS, AND TUBING 0.15 - 0.20C (SAE 1018) |
|
SAE AMS 5772 E: 2016
|
COBALT ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 40CO - 22CR - 22NI - 14.5W - 0.07LA, SOLUTION HEAT TREATED |
|
SAE AMS 4212 : 2016
|
ALUMINUM ALLOY CASTINGS, 5.0SI - 1.2CU - 0.50MG (355.0-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS5751F : 1982(S2017)
|
Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted
|
|
ASTM F 2581 : 2012 : R2017
|
Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
|
SAE AMS5624F:1989(S2017)
|
Steel Bars, High Expansion 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) Cold Finished(STABILIZED Apr 2017) |
|
SAE AMS 4225 : 2018
|
ALUMINUM ALLOY, HEAT-RESISTANT, CASTINGS, 5.0CU - 1.5NI - 0.25MN - 0.25SB - 0.25CO - 0.20TI - 0.20ZR (203.0-T6), SOLUTION HEAT TREATED AND PRECIPITATION HEAT TREATED |
|
SAE AMS 5962 : 2012
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, ROUND BARS AND WIRE, 52.5NI - 19CR - 3.0MO - 5.1CB - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION TREATED AND WORK STRENGTHENED, PRECIPITATION HARDENABLE |
|
SAE AMS 4107 : 2018
|
ALUMINUM ALLOY DIE FORGINGS (7050-T74) SOLUTION HEAT TREATED AND OVERAGED |
|
SAE AMS 4120 : 2018
|
ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE, 4.4CU - 1.5MG - 0.60MN (2024), SOLUTION HEAT TREATED AND NATURALLY AGED (T4), SOLUTION HEAT TREATED, COLD WORKED, AND NATURALLY AGED (T351) |
|
API 7 : 2001
|
SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
|
ASTM B 162 : 1999 : R2005
|
Standard Specification for Nickel Plate, Sheet, and Strip |
|
API 20B : 2013
|
OPEN DIE SHAPED FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
|
API SPEC 17K : 2017
|
SPECIFICATION FOR BONDED FLEXIBLE PIPE |
|
API 5C6 : 2006
|
PIPE WITH WELDED CONNECTORS |
|
SAE AMS 2300 L : 2015
|
STEEL CLEANLINESS, PREMIUM AIRCRAFT-QUALITY MAGNETIC PARTICLE INSPECTION PROCEDURE |
|
API 16AR : 2017
|
STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT |
|
SAE AMS 4231 : 1983
|
CASTINGS, SAND - 4.5CU - 1.1SI, SOLUTION AND PRECIPITATION HEAT TREATED |
|
ASTM B 718 : 2000
|
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip |
|
ASTM F 1684 : 2006
|
Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications |
|
ASTM A 1 : 2000
|
Standard Specification for Carbon Steel Tee Rails |
|
ASTM A 823 : 1999 : R2008
|
Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
|
ASTM A 880 : 1995
|
Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys (Withdrawn 2004) |
|
ASTM B 719 : 2000 : R2014
|
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
|
SAE AMS 4284 : 2017
|
ALUMINUM ALLOY CASTINGS, PERMANENT MOLD, 7.0SI - 0.30MG (356.0-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
|
ASTM B 906 : 2002 : R2017
|
Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
|
API 19V : 2013
|
SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
|
ASTM B 247 : 2015 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings |
|
ASTM B 277 : 1995 : R2001
|
Standard Test Method for Hardness of Electrical Contact Materials |
|
SAE AMS 2658 : 2016
|
HARDNESS AND CONDUCTIVITY INSPECTION OF WROUGHT ALUMINUM ALLOY PARTS |
|
ASTM F 1106 : 1987 : R1998
|
Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head) |
|
ASTM B 906 :2002
|
Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
|
ASTM B 906 : 2002 : R2006
|
Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
|
ASTM F 961 : 2014 : REDLINE
|
Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035) |
|
ASTM F 1684 : 2006 : R2016
|
Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications |
|
ASTM B 100 : 2013 : REDLINE
|
Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use |
|
ASTM B 168 : 2011
|
Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, |
|
ASTM A 2 : 2002 : R2014
|
Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
|
ASTM B 719 : 2000 : R2005
|
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
|
ASTM G 81 : 1997 : REV A
|
Standard Test Method for Jaw Crusher Gouging Abrasion Test |
|
ASTM E 110 : 2014 : REDLINE
|
Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers |
|
ASTM A 909/A909M : 2006 : R2011
|
Standard Specification for Steel Forgings, Microalloy, for General Industrial Use |
|
UNI EN ISO 11961 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
|
DIN EN ISO 11960:2014-05
|
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
|
NACE SP 04 72 : 2015
|
METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
|
API 14D : 1994
|
SPECIFICATION FOR WELLHEAD SURFACE SAFETY VALVES AND UNDERWATER SAFETY VALVES FOR OFFSHORE SERVICE |
|
API 6RS : 1ED 90 SUPP 1
|
BULLETIN ON REFERENCED STANDARDS FOR COMMITTEE 6, STANDARDIZATION OF VALVES AND WELLHEAD EQUIPMENT |
|
UNI EN ISO 28781 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
|
EN ISO 13628-10:2006
|
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006) |
|
MIL STD 3049 : 0
|
MATERIALS DEPOSITION, DDM: DIRECT DEPOSITION OF METAL FOR REMANUFACTURE, RESTORATION AND RECOATING |
|
API 2SC : 2010
|
MANUFACTURE OF STRUCTURAL STEEL CASTINGS FOR PRIMARY OFFSHORE APPLICATIONS |
|
03/305165 DC : DRAFT MAR 2003
|
ISO 17078-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
|
ASTM A 125 : 1996 : R2007
|
Standard Specification for Steel Springs, Helical, Heat-Treated |
|
CSA W47.1 : 2009 : INC : UPD 6 : 2013
|
CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
|
SAE AMS 4163 : 2017
|
ALUMINUM ALLOY, EXTRUSIONS 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T3511) SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND STRAIGHTENED |
|
SAE AMS 5389 : 1987(R2017)
|
ALLOY CASTINGS, SAND, CORROSION AND HEAT RESISTANT, 55NI - 16.5CR - 17MO - 4.5W - 5.8FE - 0.40V, SOLUTION HEAT TREATED |
|
ASTM F 765 : 1993 : R2012 : EDT 1
|
Standard Specification for Wildcats, Ship Anchor Chain |
|
API SPEC 19OH : 2018
|
OPENHOLE ISOLATION EQUIPMENT |
|
SAE AMS 2774 : 2016
|
HEAT TREATMENT, WROUGHT NICKEL ALLOY AND COBALT ALLOY PARTS |
|
API 16RCD RUSSIAN : 2005
|
SPECIFICATION FOR DRILL THROUGH EQUIPMENT - ROTATING CONTROL DEVICES |
|
AGMA 923 : B
|
METALLURGICAL SPECIFICATIONS OF STEEL GEARING |
|
MIL STD 1537 : C
|
ELECTRICAL CONDUCTIVITY TEST FOR MEASUREMENT OF HEAT TREATMENT OF ALUMINUM ALLOYS, EDDY CURRENT METHOD |
|
SAE AMS 5702 : 2018
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED |
|
ASTM B 22/B22M : 2017 : REDLINE
|
Standard Specification for Bronze Castings for Bridges and Turntables |
|
GG C 1969 : A
|
CURETTE, MASTOID, SPRATT |
|
MIL A 11356 : F
|
ARMOR, STEEL, CAST, HOMOGENEOUS, COMBAT-VEHICLE TYPE (1/4 TO 8 INCHES, INCLUSIVE) |
|
MIL H 24653 : 0
|
HASP, HIGH SECURITY, SHROUDED FOR SHIPBOARD DOORS AND HATCHES USING HIGH AND MEDIUM SECURITY PADLOCK |
|
A A 51141 : A
|
PLATE, LAPPING |
|
MIL S 5000 : E
|
STEEL, CHROME-NICKEL-MOLYBDENUM (4340) BARS AND REFORGING STOCK |
|
ASTM A 395/A395M : 1999 : R2009
|
Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
|
ASTM A 942 : 1995 : R2001
|
Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells |
|
ASTM B 648 : 2010 : R2015 : EDT 1
|
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor |
|
ASTM B 162 : 1999
|
Standard Specification for Nickel Plate, Sheet, and Strip |
|
SAE MAM 4427 : 2003
|
MAGNESIUM ALLOY SAND CASTINGS 4.0Y - 2.3ND - 0.7ZR (WE43A - T6) SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 5671 : 2013
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
SAE AMS 5711 : 2015
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 65NI - 15.8CR - 15.2MO - 0.30AL - 0.05LA, SOLUTION HEAT TREATED |
|
SAE AMS 2773 : 2013
|
HEAT TREATMENT, CAST NICKEL ALLOY AND COBALT ALLOY PARTS |
|
MIL P 50535 : 0
|
PROJECTILE, 155MM, HE, M449A1, BODY ASSEMBLY FOR |
|
IFI 140 : 2000
|
CARBON AND ALLOY STEEL WIRE, RODS AND BARS FOR MECHANICAL FASTENERS |
|
API 6A718 : 2009
|
NICKEL BASE ALLOY 718 (UNS N07718) FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
|
ASTM F 606/F606M : 2016 : REDLINE
|
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets |
|
API 5C6 CHINESE : 2006
|
WELDING CONNECTIONS TO PIPE |
|
MIL I 46175 : A
|
|
|
DIN EN ISO 17945 E : 2015
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
|
API 16R RUSSIAN : 2010
|
SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS |
|
ASTM A 159 : 1983 : R2015
|
Standard Specification for Automotive Gray Iron Castings |
|
ASTM A 823 : 1999 : R2003
|
Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
|
CSA W47.1 : 2009 : INC : UPD 4 : 2011
|
CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
|
SAE AMS 5664 : 2017
|
NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1950 DEGREES F (1066 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
SAE AMS 4631 : 2017
|
ALUMINUM BRONZE RODS, BARS, AND FORGINGS, 90.5CU - 7.5AL - 1.95: STRESS RELIEVED |
|
09/30154810 DC : 0
|
BS EN ISO 28781 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE VALVES AND RELATED EQUIPMENT |
|
SAE AIR 4777 : 2013(R 2018)
|
NONDESTRUCTIVE INSPECTION (NDI) METHODS USED DURING PRODUCTION AND OPERATION OF AIRCRAFT WHEELS AND BRAKES |
|
MIL B 46066 : B
|
BANDS, ROTATING, COPPER ALLOY, CENTRIFUGAL CAST (FOR CRITICAL APPLICATIONS) |
|
MIL A 46193 : 0
|
ARMOR PLATE, CONTROL ROLLED, STEEL, WROUGHT, HIGH STRENGTH, HIGH QUALITY |
|
SAE AMS 5668 : 2012
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 7.0FE - 2.5TI - 1.0CB (NB) - 0.70AL, 2100 DEGREES F (1149 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
|
04/30107683 DC : DRAFT DEC 2004
|
BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS |
|
MIL A 63547 : 0
|
ALUMINUM ALLOY 7475, ROD |
|
MIL H 6088 : G
|
HEAT TREATMENT OF ALUMINIUM ALLOYS |
|
DOD F 24669/5 : 0
|
FORGINGS AND FORGING STOCK, STEEL BARS, BILLET AND WIRE (CHROMIUM NICKEL PHOSPHOROUS AND CHROMIUM NICKEL MANGANESE PHOSPHOROUS) LOW MAGNETIC PERMEABILITY |
|
SAE AMS 5351 : 2017
|
STEEL CASTINGS, SAND, CORROSION AND MODERATE HEAT RESISTANT, 13CR, NORMALIZED AND TEMPERED |
|
MIL R 10185 : E
|
RING, BREECH, STEEL FORGINGS FOR |
|
AASHTO T 244 : 2014
|
METHOD OF TEST FOR MECHANICAL TESTING OF STEEL PRODUCTS |
|
API 20A : 2017
|
CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
|
ASTM A 220/A220M : 1999 : R2004
|
Standard Specification for Pearlitic Malleable Iron |
|
MIL P 14824 : B
|
PROJECTILE, H.E., 155MM, M107 METAL PARTS ASSEMBLY |
|
API 2Y : 2006 : R2012
|
SPECIFICATION FOR STEEL PLATES, QUENCHED-AND-TEMPERED, FOR OFFSHORE STRUCTURES |
|
08/30141132 DC : DRAFT APR 2008
|
BS EN ISO 10423 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
SAE AMS 5746 : 2012
|
ALLOY, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS - 15CR - 45NI - 4.1MO - 4.1W - 3.0TI - 1.0AL - 31FE (D979) CONSUMABLE ELECTRODE VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED |
|
API 5LC : 2015
|
CRA LINE PIPE |
|
SAE AMS 5708 : 2015
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, WIRE FORGINGS, AND RINGS, 58NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1975 DEGREES F (1079 DEGREES C) SOLUTION HEAT TREATED |
|
ASTM B 688 : 1996 : R2014
|
Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
|
MIL P 48323 : C
|
PROJECTILE, 8 INCH, HE, RA, M650 ROCKET MOTOR BODY ASSEMBLY |
|
MIL S 13823 : C
|
STEEL, SHAPES, ROLLED OR FORGED, BARS, FLATS AND SPECIAL SECTIONS (FOR ARMOR) |
|
NF EN ISO 11961 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
|
SAE AMS 4870 : 2012
|
ALUMINUM BRONZE, CENTRIFUGAL AND CHILL CASTINGS 85CU - 11AL - 3.6FE AS CAST (COMPOSITION SIMILAR TO UNS C95420) |
|
API SPEC 16RCD : 2015
|
SPECIFICATION FOR ROTATING CONTROL DEVICES |
|
SAE AMS 7721 : 2018
|
LEAD ALLOY SHEET AND EXTRUSIONS, 93PB - 6.5SB - 0.50SN, AS FABRICATED |
|
SAE AMS 4893 : 2017
|
ALLOY CASTINGS, CORROSION AND HEAT-RESISTANT, 66NI - 29CU - 4.0SI, SOLUTION TREATED |
|
API 2RD : 2013
|
DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
|
API STD 6ACRA:2015
|
AGE-HARDENED NICKEL-BASED ALLOYS FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
|
API 2S : 1995 : R2001
|
DESIGN OF WINDLASS WILDCATS FOR FLOATING OFFSHORE STRUCTURES |
|
ASTM A 909/A909M : 2006 : R2016
|
Standard Specification for Steel Forgings, Microalloy, for General Industrial Use |
|
SAE AMS 4149 : 2016
|
ALUMINUM ALLOY, DIE AND HAND FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7175-T74), SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 5662 : 2016
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AI - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
|
API 11V1 : 1995 : R2008
|
SPECIFICATION FOR GAS LIFT EQUIPMENT |
|
SAE AMS 5661 : 2012
|
NICKEL-IRON ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS - 42.5NI - 12.5CR - 5.8MO - 2.9TI - 0.015B - 35FE - CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
|
SAE AMS 4236 : 2015
|
ALUMINUM ALLOY CASTINGS, 4.6CU - 0.35MN - 0.25MG - 0.22TI (A206.0-T4), SOLUTION HEAT TREATED AND NATURALLY AGED |
|
SAE AMS 5714 : 2018
|
ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT-RESISTANT, 73NI - 15.5CR - 2.5TI - 0.70AL - 7.0FE, PRECIPITATION-HARDENABLE |
|
SAE AMS 4313 : 2016
|
ALUMINUM ALLOY, ROLLED OR FORGED RINGS, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T351, 2219-T352) SOLUTION HEAT TREATED AND MECHANICALLY STRESS RELIEVED |
|
API 5CT METRIC : 1995
|
SPECIFICATION FOR CASING AND TUBING (METRIC UNITS) |
|
API 20C CHINESE : 2009
|
CLOSED DIE FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
|
SAE AMS 5769 : 2014
|
ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0(CB+TA) - 0.15N - 32FE SOLUTION HEAT TREATED |
|
SAE AMS 5707 : 2017
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED 1825 TO 1900 DEGREES F (996 TO 1038 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
|
API 17D REDLINE : 2011
|
DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
|
SAE AMS 2301 : 2015
|
STEEL CLEANLINESS, AIRCRAFT QUALITY MAGNETIC PARTICLE INSPECTION PROCEDURE |
|
SAE AMS 5768 : 2018
|
ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB - 0.15N - 31FE, SOLUTION AND PRECIPITATION HEAT TREATED |
|
NFPA 1904 : 1991
|
AERIAL LADDER AND ELEVATING PLATFORM FIRE APPARATUS |
|
API 942 : 2ED 82
|
CONTROLLING WELD HARDNESS OF CARBON STEEL REFINERY EQUIPMENT TO PREVENT ENVIRONMENTAL CRACKING |
|
SAE AMS 5670 : 2012
|
NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS - 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, 1800 DEGREE F (982 DEGREE C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
ASTM B 846 : 2011-07
|
TERMINOLOGY FOR COPPER AND COPPER ALLOYS |
|
ASTM A 602 : 1994 : R2018
|
Standard Specification for Automotive Malleable Iron Castings |
|
ASTM F 1106 : 1987 : R2006
|
Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head) |
|
ASTM F 139 : 2012
|
Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673) |
|
ASTM A 395/A395M : 1999 : R2018
|
Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
|
ASTM A 1100 : 2016
|
Standard Guide for Qualification and Control of Induction Heat Treating |
|
ASTM F 3122 : 2014
|
Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
|
ASTM B 546 : 2004 : R2014
|
Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
|
ASTM A 1 : 2000 : R2005
|
Standard Specification for Carbon Steel Tee Rails |
|
ASTM A 1058 : 2014 : REDLINE
|
Standard Test Methods for Mechanical Testing of Steel Products—Metric |
|
ASTM A 823 : 1999 : R2012
|
Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
|
ASTM A 1 : 2000 : R2018
|
Standard Specification for Carbon Steel Tee Rails |
|
ASTM B 752 : 2006 : R2011 : EDT 2
|
Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application |
|
ASTM A 47/A47M : 1999 : R2018 : EDT 1
|
Standard Specification for Ferritic Malleable Iron Castings |
|
EN ISO 13628-4:2010/AC:2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
|
BS EN ISO 13628-10:2006
|
Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe |
|
BS EN ISO 15136-2:2006
|
Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems |
|
BS EN ISO 10423:2009 (published 2010-07)
|
Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM |
|
ISO 15136-2:2006
|
Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems |
|
ISO 10423:2009
|
Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment |
|
ISO 15136-1:2009
|
Petroleum and natural gas industries Progressing cavity pump systems for artificial lift Part 1: Pumps |
|
ISO 15156-2:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
|
FF-S-1362:2014
|
STUD, PLAIN, GENERAL PURPOSE |
|
ISO 17945:2015
|
Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
|
EN ISO 17945:2015
|
Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015) |
|
EN ISO 15136-1:2009
|
Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
|
EN ISO 10423:2009
|
Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009) |
|
EN ISO 15136-2:2006
|
Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006) |
|
EN ISO 28781:2010
|
Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010) |
|
ASTM A 532/A532M : 2010 : R2014
|
Standard Specification for Abrasion-Resistant Cast Irons |
|
ASTM A 159 : 1983 : R1993
|
Standard Specification for Automotive Gray Iron Castings |
|
03/301625 DC : DRAFT JAN 2003
|
BS EN ISO 10424-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 1: SPECIFICATION FOR ROTARY DRILLING EQUIPMENT |
|
CSA W47.1 : 2009 : INC : UPD 2 : 2011 : FR
|
CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
|
BS EN ISO 28781:2010
|
Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment |
|
ASTM A 602 : 1994 : R1998
|
Standard Specification for Automotive Malleable Iron Castings |
|
NACE MR 01 75 : 2003
|
METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS |
|
ISO 13533:2001
|
Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
|
EN ISO 11960:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
|
SAE AMS 5080 : 2016
|
STEEL, BARS, FORGINGS, AND TUBING, 0.31 - 0.38C (SAE 1035) |
|
API 945 : 2003 : R2008
|
AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS |
|
API 16C CHINESE : 1993
|
SPECIFICATION FOR CHOKE AND KILL SYSTEMS |
|
SAE J 2477 : 2018
|
AUTOMOTIVE AUSTEMPERED DUCTILE (NODULAR) IRON CASTINGS (ADI) |
|
API 16A CHINESE : 2004
|
SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
|
CSA W47.1 : 2009 : INC : UPD 5 : 2012
|
CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
|
MIL P 50537 : 0
|
PROJECTILE 155mm, HE M449A1 HARDWARE FOR |
|
BS EN ISO 17945:2015
|
Petroleum, petrochemical and natural gas industries. Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
|
MIL DTL 46177 : C
|
ARMOR, STEEL PLATE AND SHEET, WROUGHT, HOMOGENEOUS (1/8 TO LESS THAN 1/4 INCH THICK) |
|
DOD STD 35/121 : 0
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, EYELETS, FERRULES, AND GROMMETS |
|
QQ N 286 : G
|
NICKEL-COPPER ALUMINUM ALLOY, WROUGHT (UNS N05500) |
|
ASTM A 47/A47M : 1999
|
Standard Specification for Ferritic Malleable Iron Castings |
|
DIN EN ISO 17945:2015-08
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
|
API SPEC 16C : 2015
|
CHOKE AND KILL EQUIPMENT |
|
API 16R : 1997 : R2010
|
SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS |
|
MIL I 45916 : B
|
INSERT,SCREW THREAD - THREAD CUTTING AND THREAD FORMING |
|
MIL S 46172 : A
|
STEEL FORGINGS |
|
API 6A718 RUSSIAN : 2009
|
NICKEL BASE ALLOY 718 (UNS N07718) FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
|
MIL T 13915 : E
|
TUBE, STEEL , SEAMLESS, FOR CANNONS AND RECOILLESS RIFLES |
|
ASTM A 395/A395M : 1999
|
Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
|
MIL DTL 14824 : C
|
PROJECTILE 155 MM, HE, METAL PARTS ASSEMBLY, M107 |
|
MIL DTL 13823 : D
|
STEEL; SHAPES, ROLLED OR FORGED; BARS, FLATS AND SPECIAL SECTIONS (FOR ARMOR) |
|
SAE AMS 5666H : 2016
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, EXTRUSIONS, AND RINGS, 62NI - 21.5CR - 9.0MO - 3.65CB (NB), ANNEALED |
|
ASTM B 647 : 2010 : R2016
|
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage |
|
MIL DTL 22606 : D
|
FLASK AND END PLUGS, COMPRESSED GAS - AIR, OXYGEN, AND NITROGEN |
|
MIL B 16166 : B
|
BRONZE, ALUMINUM, FORGINGS, HEAT TREATED |
|
MIL STD 1867 : A
|
|
|
N287.2-17
|
Material requirements for concrete containment structures for nuclear power plants |
|
SAE AMS 5758 : 2014
|
ALLOY, CORROSION-RESISTANT, BARS, 20CR - 35NI - 35CO - 10MO, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM REMELTED, SOLUTION HEAT TREATED FOR WORK STRENGTHENING |
|
MIL P 70612 : A
|
PROJECTILE, 155MM, XM864 BASE ASSEMBLY FOR |
|
03/313799 DC : DRAFT AUG 2003
|
ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
|
API 7NRV CHINESE : 2006
|
SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
|
MIL PRF 32269 : 0
|
PERFORATED HOMOGENEOUS STEEL ARMOR |
|
ASTM A 220/A220M : 1999 : R2009
|
Standard Specification for Pearlitic Malleable Iron |
|
MIL E 19141 : D
|
ELECTRODE, WELDING, SURFACING, IRON BASE ALLOY |
|
MIL STD 40002 : 0
|
HEAT TREATMENT CODING SYSTEM, GENERAL |
|
MIL Z 50976 : 0
|
ZIRCONIUM SPONGE |
|
MIL DTL 14852 : D
|
PROJECTILE, 105 MM, ILLUMINATING, M314A3 AND PROJECTILE, 105 MM, INFRARED ILLUMINATING, M1064 METAL PARTS ASSEMBLY |
|
SAE AMS 4444 : 2017
|
MAGNESIUM ALLOY CASTINGS, SAND, 6.0ZN - 0.80ZR (ZK61A-T5), PRECIPITATION HEAT TREATED |
|
IFI 153 : 2003
|
STAINLESS STEEL WIRE AND RODS FOR MECHANICAL FASTENERS |
|
API 11D2 : 2010
|
PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
|
API 64 : 2017-08
|
DIVERTER EQUIPMENT SYSTEMS |
|
SAE AMS 4275 : 2017
|
CASTINGS, PERMANENT MOLD, 6.2SN - 1CU - 1NI, STRESS RELIEVED |
|
SAE AMS 4677 : 2017
|
NICKEL-COPPER ALLOY, CORROSION RESISTANT, BARS AND FORGINGS 66.5NI - 2.9AL - 30CU ANNEALED |
|
SAE AMS 4633 : 2018
|
BRONZE, ALUMINUM SILICON, RODS, BARS, AND FORGINGS 90CU - 7.0AL - 1.8SI DRAWN AND STRESS RELIEVED (HR50) |
|
SAE AMS H 6088 : 2000
|
HEAT TREATMENT OF ALUMINUM ALLOYS |
|
SAE J 158 : 1986
|
AUTOMOTIVE MALLEABLE IRON CASTINGS |
|
API SPEC 19AC : 2016
|
SPECIFICATION FOR COMPLETION ACCESSORIES |
|
SAE AMS 2728 : 2012
|
HEAT TREATMENT OF WROUGHT COPPER BERYLLIUM ALLOY PARTS |
|
SAE AMS 2368 : 2017
|
SAMPLING AND TESTING OF WROUGHT TITANIUM RAW MATERIAL EXCEPT FORGINGS AND FORGING STOCK |
|
SAE AMS 5703 : 2018
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB - 1.8TI, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
|
API 7NRV : 2006
|
SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
|
SAE AMS 5759M : 2015
|
COBALT ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGING STOCK, FORGINGS, AND RINGS 52CO - 20CR - 10NI - 15W |
|
API 16R:1997
|
SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS |
|
SAE AMS 4227 : 1988
|
ALUMINUM ALLOY, CASTINGS SAND, 8.0CU 6.0MG 0.50MN 0.50NI, AS CAST |
|
API 2Y : 2006
|
SPECIFICATION FOR STEEL PLATES, QUENCHED-AND-TEMPERED, FOR OFFSHORE STRUCTURES |
|
SAE AMS 4123 : 2011
|
ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS (7075-T651) SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 5852 : 2001
|
NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BILLETS AND PREFORMS 55NI 15CR 17CO 5.0MO 3.5TI 4.0AI 0.025B, POWDER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED |
|
API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018
|
SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
|
ASTM B 719 : 2000
|
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
|
SAE AMS 4443 : 2017
|
MAGNESIUM ALLOY, SAND CASTINGS, 4.5ZN - 0.75ZR (ZK51A-T5) PRECIPITATION HEAT TREATED |
|
API TR 17TR8 : 2018
|
HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
|
ASTM A 834 : 1995 : R2006
|
Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
|
ASTM B 162 : 1999 : R2014
|
Standard Specification for Nickel Plate, Sheet, and Strip |
|
ASTM B 752 : 2006
|
Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application |
|
ASTM A 2 : 2002
|
Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
|
ASTM B 367:2013
|
Standard Specification for Titanium and Titanium Alloy Castings |
|
ASTM B 906 : 2002 : R2012
|
Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
|
ASTM E 1187 : 1997
|
Standard Terminology Relating to Conformity Assessment (Withdrawn 2006) |
|
ASTM A 220/A220M : 1999 : R2014
|
Standard Specification for Pearlitic Malleable Iron |
|
ASTM A 897/A897M : 2016 : REDLINE
|
Standard Specification for Austempered Ductile Iron Castings |
|
ASTM B 277 : 1995 : R2012
|
Standard Test Method for Hardness of Electrical Contact Materials |
|
ASTM B 718 : 2000 : R2016
|
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip |
|
ASTM F 3184 : 2016
|
Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
|
ASTM A 909 : 2003
|
Standard Specification for Steel Forgings, Microalloy, for General Industrial Use |
|
ASTM A 395/A395M : 1999 : R2004
|
Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
|
ASTM A 125 : 1996 : R2013 : EDT 1
|
Standard Specification for Steel Springs, Helical, Heat-Treated |
|
ASTM B 367 : 2013 : R2017
|
Standard Specification for Titanium and Titanium Alloy Castings |
|
ASTM F 3318 : 2018
|
Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
|
ASTM A 834 : 1995 : R2011
|
Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
|
ASTM F 621 : 2012 : R2017
|
Standard Specification for Stainless Steel Forgings for Surgical Implants |
|
I.S. EN ISO 11961:2008
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
|
ASTM B 546 : 2004 : R2009
|
Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
|
ASTM A 942 : 1995 : R2012
|
Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells |
|
ASTM A 476/A476M : 2000 : R2018
|
Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
|
ASTM A 476/A476M : 2000 : R2009
|
Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
|
ASTM B 688 : 1996 : R2009
|
Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
|
ASTM A 942 : 1995 : R2007
|
Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells |
|
ASTM E 103 : 2017 : REDLINE
|
Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials |
|
ASTM F 621 : 2012
|
Standard Specification for Stainless Steel Forgings for Surgical Implants |
|
ASTM A 909/A909M : 2006
|
Standard Specification for Steel Forgings, Microalloy, for General Industrial Use |
|
ASTM A 942/A942M : 1995 : R2012 : EDT 1
|
Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells |
|
EN ISO 13533:2001/AC:2006
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
|
BS EN ISO 13628-4:1999
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
|
ISO 28781:2010
|
Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment |
|
BS EN ISO 15156-2:2015
|
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
|
BS EN ISO 15136-1:2001
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
|
BS EN ISO 13533:2002
|
Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment |
|
I.S. EN ISO 13533:2002
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |