ASTM E 1019 : 2018
Current
The latest, up-to-date edition.
Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques
Hardcopy , PDF
English
15-04-2018
These test methods cover the determination of carbon, sulfur, nitrogen, and oxygen, in steel, iron, nickel, and cobalt alloys having chemical compositions within the following limits.
1.1These test methods cover the determination of carbon, sulfur, nitrogen, and oxygen, in steel, iron, nickel, and cobalt alloys having chemical compositions within the following limits:
| Element | Mass Fraction Range, % |
| Aluminum | 0.001 to 18.00 |
| Antimony | 0.002 to 0.03 |
| Arsenic | 0.0005 to 0.10 |
| Beryllium | 0.001 to 0.05 |
| Bismuth | 0.001 to 0.50 |
| Boron | 0.0005 to 1.00 |
| Cadmium | 0.001 to 0.005 |
| Calcium | 0.001 to 0.05 |
| Carbon | 0.001 to 4.50 |
| Cerium | 0.005 to 0.05 |
| Chromium | 0.005 to 35.00 |
| Cobalt | 0.01 to 75.0 |
| Niobium | 0.002 to 6.00 |
| Copper | 0.005 to 10.00 |
| Hydrogen | 0.0001 to 0.0030 |
| Iron | 0.01 to 100.0 |
| Lead | 0.001 to 0.50 |
| Magnesium | 0.001 to 0.05 |
| Manganese | 0.01 to 20.0 |
| Molybdenum | 0.002 to 30.00 |
| Nickel | 0.005 to 84.00 |
| Nitrogen | 0.0005 to 0.50 |
| Oxygen | 0.0005 to 0.03 |
| Phosphorus | 0.001 to 0.90 |
| Selenium | 0.001 to 0.50 |
| Silicon | 0.001 to 6.00 |
| Sulfur | 0.002 to 0.35 |
| Tantalum | 0.001 to 10.00 |
| Tellurium | 0.001 to 0.35 |
| Tin | 0.002 to 0.35 |
| Titanium | 0.002 to 5.00 |
| Tungsten | 0.005 to 21.00 |
| Vanadium | 0.005 to 5.50 |
| Zinc | 0.005 to 0.20 |
| Zirconium | 0.005 to 2.500 |
1.2The test methods appear in the following order:
| Sections | |
| Carbon, Total, by the Combustion and Infrared Absorption or Thermal Conductivity Detection Test Method | 10 – 20 |
| Nitrogen by the Inert Gas Fusion and Thermal Conductivity Detection Test Method | 32 – 42 |
| Oxygen by the Inert Gas Fusion and Infrared Absorption or Thermal Conductivity Detection Test Method | 43 – 54 |
| Sulfur by the Combustion-Infrared Absorption Detection Test Method | 55 – 65 |
| Sulfur by the Combustion–Infrared Absorption Test Method (Potassium Sulfate Calibration) – Discontinued 2018 | 21 – 31 |
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 6.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
E 01
|
| DocumentType |
Test Method
|
| Pages |
22
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
| ASTM A 904 : 2014 | Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts |
| ASTM F 3055 : 2014 : REV A | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ASTM A 839 : 2015 | Standard Specification for Iron-Phosphorus Powder Metallurgy Parts for Soft Magnetic Applications |
| ASTM B 783 : 2013 | Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts |
| ASTM B 853 : 2016 | Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components |
| ASTM B 848 : 2015 | Standard Specification for Powder Forged (PF) Ferrous Materials |
| ASTM E 415 : 2017 | Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry |
| ASTM A 753 : 2008 : R2013 | Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080) |
| ASTM F 1466 : 1999 : R2015 | Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications |
| ASTM E 159 : 2017 | Standard Test Method for Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss) |
| ASTM F 1376 : 1992 : R2012 | Standard Guide for Metallurgical Analysis for Gas Distribution System Components |
| ASTM A 756 : 2017 | Standard Specification for Stainless Anti-Friction Bearing Steel |
| ASTM E 2209 : 2013 | Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry |
| ASTM A 1089/A1089M : 2014 | Standard Specification for Highly Loaded Anti-Friction Bearing Steel |
| ASTM E 353 : 2014 | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| ASTM A 811 : 2015 | Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques |
| ASTM A 534 : 2017 | Standard Specification for Carburizing Steels for Anti-Friction Bearings |
| ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM A 801 : 2014 | Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650) |
| ASTM F 2063 : 2018 | Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants |
| ASTM E 1473 : 2016 | Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys |
| ASTM B 438 : 2017 | Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated) |
| ASTM B 883 : 2019 | Standard Specification for Metal Injection Molded (MIM) Materials |
| ASTM E 1915 : 2013 | Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics |
| ASTM B 804 : 2002 : R2018 | Standard Specification for UNS N08367 and UNS N08926 Welded Pipe |
| ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
| ASTM E 354 : 2014 | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
| ASTM A 751 : 2014 : REV A | Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products |
| ASTM E 2050 : 2017 | Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion |
| ASTM A 485 : 2017 | Standard Specification for High Hardenability Antifriction Bearing Steel |
| ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
| ASTM A 295/A295M : 2014 | Standard Specification for High-Carbon Anti-Friction Bearing Steel |
| ASTM F 1684 : 2006 : R2016 | Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications |
| ASTM A 1001 : 2018 | Standard Specification for High-Strength Steel Castings in Heavy Sections |
| ASTM A 838 : 2018 | Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications |
| ASTM E 350 : 2018 | Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron |
| SSPC-AB 3:2017(R2023) | Ferrous Metallic Abrasive |
| ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM E 135 : 2023 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM E 135 : 2021 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1806 : 1996 : R2006 | Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
| ASTM E 135 : 2003 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
| ASTM E 1601 : 2019 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 135 : 2023 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1601 : 1998 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 1601 : 2010 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 1806 : 2009 | Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
| ASTM E 1806 : 2009 : R2016 | Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
| ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
| ASTM E 135 : 2002 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2022 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1601 : 2012 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 135 : 2022 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2021 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1806 : 2018 | Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
| ASTM E 135 : 2003 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2003 : REV C | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1806 : 1996 | Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM E 173 : 1993 | Practice for Conducting Interlaboratory Studies of Methods for Chemical Analysis of Metals (Withdrawn 1997) |
| ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
| ASTM E 135 : 2022 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 50 : 1982 : R1986 | Standard Practices for Apparatus, Reagents, and Safety Precautions for Chemical Analysis of Metals |
| ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
| ASTM E 1806 : 2023 | Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
| ASTM E 135 : 2020 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
| ASTM E 1806 : 1996 : R2001 | Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
| ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.