• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 1070 : 2017 : REV A

Current
Current

The latest, up-to-date edition.

Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

15-11-2017

1.1This test method covers the determination of phosphorus in iron ores, concentrates, and agglomerates in the range from 0.005 % to 1.0 % phosphorus.

1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3This test method has been evaluated in accordance with Practice E1601 and Guide E1763. Unless otherwise noted in the precision and bias section, the lower limit in the scope of each method specifies the lowest analyte content that may be analyzed with acceptable error (defined as a nominal 5 % risk of obtaining a 50 % or larger relative difference in results on the same test sample in two laboratories).

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 01
DocumentType
Test Method
Pages
4
PublisherName
American Society for Testing and Materials
Status
Current

ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E 135 : 2023 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 29 : 2002 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 1193 : 1977 : R1983 : EDT 1 Standard Specification for Reagent Water
ASTM E 135 : 2021 : REV A Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 877 : 2021 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties
ASTM E 60 : 2011 : R2016 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry
ASTM E 135 : 2003 : REV B Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM D 1193 : 2006 : R2011 Standard Specification for Reagent Water
ASTM E 1601 : 2019 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM E 135 : 2023 : REV A Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 1601 : 1998 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM E 1601 : 2010 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM E 1763 : 2006 Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods (Withdrawn 2015)
ASTM D 1193 : 1991 Standard Specification for Reagent Water
ASTM E 135 : 2002 : REV A Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 135 : 2022 : REV B Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 1601 : 2012 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM E 135 : 2022 : REV A Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 877 : 2013 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties
ASTM E 135 : 2021 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 135 : 2003 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 1763 : 1998 Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods
ASTM E 135 : 2003 : REV C Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 60 : 2011 : R2022 : EDT 1 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry
ASTM D 1193 : 1970 Standard Specification For Reagent Water
ASTM D 1193 : 2006 Standard Specification for Reagent Water
ASTM E 135 : 2022 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 50 : 1982 : R1986 Standard Practices for Apparatus, Reagents, and Safety Precautions for Chemical Analysis of Metals
ASTM D 1193 : 1999 Standard Specification for Reagent Water
ASTM E 135 : 2020 : REV B Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

View more information
£45.92
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.