ASTM F 1864 : 2021
|
Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
|
ASTM D 6277 : 2007 : R2022
|
Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
|
ASTM E 932 : 1989 : R2021
|
Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
|
ASTM D 7066 : 2004 : R2017
|
Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
|
ASTM E 1865 : 1997 : R2021
|
Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
|
ASTM D 3124 : 1998 : R2019
|
Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
|
ASTM E 334 : 2001 : R2021
|
Standard Practice for General Techniques of Infrared Microanalysis
|
ASTM D 3288/D3288M : 2020
|
Standard Test Methods for Magnet-Wire Enamels
|
ASTM D 7806 : 2020
|
Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Oil Using Mid-Infrared Spectroscopy (FTIR Transmission Method)
|
ASTM D 6348 : 2012 : R2020
|
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM E 1655 : 2017
|
Standard Practices for Infrared Multivariate Quantitative Analysis
|
ASTM E 573 : 2001 : R2021
|
Standard Practices for Internal Reflection Spectroscopy
|
ASTM D 6047 : 2017 : R2021
|
Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
|
ASTM E 2412 : 2010 : R2018
|
Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
|
ASTM D 7399 : 2018
|
Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry
|
ASTM D 3677 : 2010 : R2019
|
Standard Test Methods for Rubber—Identification by Infrared Spectrophotometry
|
ASTM E 2106 : 2000 : R2019
|
Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
|
ASTM E 1982 : 1998 : R2021
|
Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
|
ASTM D 6645 : 2018
|
Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
|
ASTM E 2105 : 2000 : R2016
|
Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
|
ASTM D 7678 : 2017 : R2022
|
Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
|
ASTM D 7588 : 2011 : R2018
|
Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer's Container
|
ASTM D 3900 : 2017 : R2021
|
Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
|
ASTM E 1642 : 2000 : R2016
|
Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
|
ASTM E 169 : 2016 : R2022
|
Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
|
ASTM D 6342 : 2022
|
Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
|
ASTM D 2702 : 2005 : R2021
|
Standard Practice for Rubber Chemicals—Determination of Infrared Absorption Characteristics
|
ASTM E 275 : 2008 : R2022
|
Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
|
ASTM D 7418 : 2022
|
Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
|
ASTM E 60 : 2011 : R2022 : EDT 1
|
Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry
|
ASTM E 3045 : 2022
|
Standard Practice for Crack Detection Using Vibroacoustic Thermography
|
ASTM D 5594 : 2018 : REV A
|
Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
|
ASTM E 1252 : 1998 : R2021
|
Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
|
ASTM D 7861 : 2014 : R2019
|
Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
|
ASTM D 7889 : 2021
|
Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy
|
ASTM D 5477 : 2018
|
Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
|
ASTM D 7575 : 2011 : R2017
|
Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
|
ASTM D 8350 : 2022
|
Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine
|
ASTM D 8074 : 2022
|
Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
|
ASTM D 8193 : 2018
|
Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
|
ASTM D 7371 : 2014 : R2022
|
Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
|
ASTM D 2238 : 2022
|
Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm<sup>−1</sup>
|
ASTM D 2144 : 2007 : R2021
|
Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption
|
ASTM E 1944 : 1998 : R2021
|
Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
|
ASTM D 5576 : 2000 : R2021 : EDT 1
|
Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
|
ASTM D 8111 : 2022
|
Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine
|
ASTM D 6248 : 2021
|
Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
|
ASTM E 131 : 2010 : R2023
|
Standard Terminology Relating to Molecular Spectroscopy
|